Quality Assurance Composite Assembly Inspector

2 months ago


Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

**MAIN RESPONSIBILITIES**

**Assembly Inspection/Paint Inspection**
- **Visual Inspection**
- **Verify potting material shelf life**
- **Verify that inserts, components, etc. are installed as per drawing.**
- **Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.**
- **Dust inclusions, orange peel, tears, sagging or blistering.**
- **Inspecting parts to planned MIDs and Inspection documents, drawings etc.**
- **Recording of nonconformities and quarantining non conforming parts with red tags.**
- **Create and maintain inspection plans and procedures.**
- **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc..**
- **Perform First Article Inspections to AS9102 requirements.**
- **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.**
- **Serve as a guide to Assembly technicians by sharing requirements and acceptance criteria for Inspection.**
- **Participate in all initial and recurrent training to maintain certifying staff authorities.**

**Trim Inspection**
- **Verification of tool validity**
- **Visual Inspection**
- **Inspection of parts to planned MIDs and Inspection documents, drawings etc.**
- **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.**
- **Recording of nonconformities & quarantining non conforming parts with red tags.**

**Shipping Inspection**
- **Verify that all inspection stages have been completed.**
- **Inspecting parts to planned MIDs and Inspection documents, drawings etc.**
- **Recording of nonconformities & quarantining non conforming parts with red tags.**
- **Preparation of shipping documentation including Form Ones and C of Cs.**
- **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.**
- **Participate in all initial and recurrent training to maintain certifying staff authorities.**
- **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.**

**Lay-up Inspection**
- **Review all materials in kits for shelf life & out life remaining**
- **Verification that all materials have been cut & identified with ply number & orientation**
- **Verification that Material Identification Sheets are complete.**
- **Verification validity of tooling.**
- **Visual Inspection to planned MIDs and Inspection documents, drawings etc.**
- **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.**
- **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.**
- **Serve as a guide to Layup technicians by sharing requirements and acceptance criteria for Inspection.**
- **Recording of nonconformities & quarantining non conforming parts with red tags.**

**Core Inspection**
- **Verification validity of tooling**
- **Verification of conformity to templates and drawings**
- **Visual Inspection for damage, cell ruptures, contamination dust /oil**
- **Inspection of parts to planned MIDs and Inspection documents, drawings etc.**
- **Recording of nonconformities & quarantining non conforming parts with red tags.**
- **Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.**
- **Participate and lead root cause and corrective action process using Rapid 5 Whys, 8D tools etc.**

**MINIMUM JOB REQUIREMENTS**

**Education**:

- **College Diploma (Mechanical Engineering Technician or Technologist) or relevant experience**

**Experience**:

- **5 years of composite experience (Manufacturing/Assembly Inspection), specifically with a Quality Assurance System (ISO 9001, AS 9100)**
- **NDT/Ultrasonic Inspection experience an asset**

**Knowledge, Skills, Demonstrated Capabilities**:

- **Ability to work under broad supervision**
- **Independent and able to work with a team**
- **Attention to detail**
- **Able to manage time effectively and prioritize work**
- **Professional working relationships with internal and external sources, including regulatory and quality certified agencies**
- **Able to work under pressure to meet demanding work schedules**
- **Excellent verbal and written communication skills**
- **Excellent problem solving skills**
- **Able to write accurate technical reports**
- **Ability to read various Blueprints**
- **Able to use measurement tool**

**Must be able to currently legally work in Canada**

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

**Company**:
Airbus Helicopters Canada Ltd

**Employment Type**:
Permanent**Experience Level**:
Professional

**Job Family**:
Quality Inspection

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.



  • Fort Erie, Canada airbus Full time

    Job Description: MAIN RESPONSIBILITIESAssembly Inspection/Paint InspectionVisual InspectionVerify potting material shelf lifeVerify that inserts, components, etc. are installed as per drawing.Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.Dust inclusions, orange peel, tears, sagging or blistering.Inspecting parts  to...

  • Composite Assembly

    4 weeks ago


    Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **This position reports directly to the Supervisor, Composite Assembly. The Composite Assembly Technician is responsible for assembly of helicopter parts through various joining and bonding methods. The Composite Assembly Technician fits parts together through the use of jigs, fixtures and using small hand and pneumatic tools.** **MAIN...


  • Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **This position reports directly to the Supervisor, Composite Assembly. The Composite Assembly Technician is responsible for assembly of helicopter parts through various joining and bonding methods. The Composite Assembly Technician fits parts together through the use of jigs, fixtures and using small hand and pneumatic tools.** **MAIN...


  • Fort Erie, Canada Fleet Canada Inc Full time

    Overview: We are currently seeking an experienced Inspector to join our team. As an Inspector, you will play a crucial role in ensuring the quality and accuracy of our products through meticulous inspection and analysis. This is a full-time position with opportunities for growth and advancement. **Duties**: 1. Verify materials are used within allotted...


  • Fort Erie, Canada Airbus Full time

    Carry out the preparation of parts of variable dimensions using the techniques of molding, by stratification of pre-impregnated fabrics, by stratification of dry fabrics with resin impregnation, and by injection or infusion of resins (high performance composite materials of the type glass fiber, carbon, aramid, special resins...). To ensure the manufacture...


  • Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **TEMPORARY 12 MONTH POSITION** The Quality Assurance and Calibration Inspector is responsible for receiving inspection, intermediate inspection and Final inspection of Sheet Metal parts and Kits. In this position, the Inspector creates permission letters that allow customers to install kits on specific aircraft serial number and provide customer tracking...


  • Fort Erie, Canada Airbus Full time

    **MAIN RESPONSIBILITIES** **Quality Control Responsibilities** - **Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list.** - **Ensure the weekly KPIs are met and take corrective actions to address any anomalies.** - **Managing any backlog with OT as needed.** -...


  • Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIES Quality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies. Managing any backlog with OT as needed. Proactively identifying...


  • Fort Erie, Canada Fleet Canada Inc Full time

    **Job Summary**: A Chief Inspector oversees and coordinates inspection activities, ensuring compliance with regulations and standards. You will be responsible for ensuring that our products meet the highest quality standards through thorough inspections and data analysis. Your expertise in quality control and assurance will play a critical role in...

  • Quality Inspector

    7 months ago


    Fort Erie, Canada Fleet Canada Inc Full time

    '''Job Summary''' We are seeking a detail-oriented and experienced Quality Assurance Inspector to join our team. As a Quality Assurance Inspector, you will be responsible for ensuring that our products meet the highest quality standards before they are released to customers. Your attention to detail and ability to analyze data will be crucial in identifying...

  • Quality Inspector

    4 months ago


    Fort Erie, Canada Fleet Canada Inc Full time

    '''Job Summary''' We are seeking a detail-oriented and experienced Quality Assurance Inspector to join our team. As a Quality Assurance Inspector, you will be responsible for ensuring that our products meet the highest quality standards before they are released to customers. Your attention to detail and ability to analyze data will be crucial in identifying...


  • Fort Erie, Canada Fleet Canada Inc Full time

    **About Us**: Fleet Canada Inc. is an equal opportunity employer in the aerospace manufacturing sector, committed to inclusive and barrier-free recruitment and work environments. Located in Fort Erie, our dynamic 500,000 sq ft build-to-print facility specializes in manufacturing sheet-metal, machined, and composite parts and assemblies for several major...


  • Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **This position reports directly to the Supervisor, Composite Assembly. **The Composite Repair Technician is responsible for Repairing of various helicopter parts using a variety of different materials and resins depending on the parts and the repair instruction provided. The Composite Repair Technician will use small hand and pneumatic tools for surface...


  • Fort Erie, Canada airbus Full time

    Job Description: MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively...


  • Fort Erie, Canada Fleet Canada Inc Full time

    **About Us**: Fleet Canada Inc. is an equal opportunity employer in the aerospace manufacturing sector, committed to inclusive and barrier-free recruitment and work environments. Located in Fort Erie, our dynamic 500,000 sq ft build-to-print facility specializes in manufacturing sheet-metal, machined, and composite parts and assemblies for several major...


  • Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **This position reports directly to the Supervisor, Composite Prep & Paint. The Composite Sanding Technician is responsible for sanding and filling all aircraft composite panels (parts) as part of the preparation for painting and priming.** **MAIN RESPONSIBILITIES** **Sanding Composite Panels**: - **Pick parts from buffer rack according to the priority...


  • Fort Erie, Canada airbus Full time

    Job Description: The Composite Tooling Technician is responsible for the production ready state of all tooling; including masters, moulds, jigs, fixtures, templates and production aides.  The incumbent will also provide recommendations for safety improvements, cost savings and new tooling initiatives.MAIN RESPONSIBILITIESProduction - Tooling...


  • Fort Erie, Canada Fleet Canada Inc Full time

    Assembly Fitters This is an hourly position in which you are responsible for ensuring the work is performed to drawing dimensions and customer specifications. Parts are assembled using a wide variety of techniques, both pre-fabricated and composite materials. Must have knowledge of blueprints and the use of various tools and measuring instruments (verniers,...


  • Fort Erie, Canada RMC INC Full time

    Electronics assemblers and fabricators assemble and fabricate electronic / Mechanical equipment, parts and components. Electronics inspectors and testers inspect and test electronic and electromechanical assemblies, subassemblies, parts and components to ensure conformance to prescribed standards. They are employed in electronics manufacturing...

  • Methods Planner

    3 months ago


    Fort Erie, Canada AAA Canada Full time

    **JOB DESCRIPTION** **Responsibilities** - Analyze and read Aerospace prints - Prepare planning associated with the parts - Develop manufacturing procedures for assembly, composites and manufacturing - Estimate costs for assembly, composites and manufacturing using an engineering model - Obtain cost and material estimates from sub-contractors - Plan flow of...