Fabrication,assembly,bond Technicians

5 months ago

Fort Erie, Canada Fleet Canada Inc Full time

Assembly Fitters
This is an hourly position in which you are responsible for ensuring the work is performed to drawing dimensions and customer specifications. Parts are assembled using a wide variety of techniques, both pre-fabricated and composite materials. Must have knowledge of blueprints and the use of various tools and measuring instruments (verniers, scales, micrometers etc.)

Bond Technicians
This is an hourly position in which you bond a combination of various elements for metal to honeycomb; metal to composite and/or metal to metal. Must be able to perform core cutting, hand fit core, media blasting and have the ability to perform composite & metal-to-metal layup is preferred.

Fabrication Technicians

This is an hourly position in which your initial responsibility will be to fabricate and prepare detail parts using a variety of tools, prepare machines/equipment/tools for job required, layout parts with scribe lines; deburr edges for close tolerance set ups, use proper blocks, dies, templates, sample parts, tapes, check blue prints and specifications as required, ensure proper material and tools match work order, operate brakes, punches (strippet, magnetic etc.), drills, routers (pin, stringer, onsrud, tracer, watkins, travel, hand etc.), operate saws (band, cutoff, table etc.), radius, nibbler, hydro press, joggle press, punch press, drill and rout centre, stretch form, deburr machines (flay & vibro), operate rolls, ovens, heat treat tanks, cranes, lifting devices, shears, cut miters, monitor times for heat treat; ensure proper freezer controls.

**Job Types**: Full-time, Permanent

**Benefits**:

- Casual dress
- Dental care
- Disability insurance
- Extended health care
- Life insurance
- Paid time off
- Vision care

Schedule:

- 8 hour shift

Work Location: In person

  • Sheet Metal Technician

    5 months ago

    Fort Erie, Canada Airbus Helicopters, Inc Full time

    **_WE'RE LOOKING FOR A SHEET METAL TECHNICIAN - ASSEMBLY_** **_ POSITION LOCATION: FORT ERIE_** The Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements. **MAIN...

  • Composite Assembly Technician

    2 months ago

    Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **This position reports directly to the Supervisor, Composite Assembly. The Composite Assembly Technician is responsible for assembly of helicopter parts through various joining and bonding methods. The Composite Assembly Technician fits parts together through the use of jigs, fixtures and using small hand and pneumatic tools.** **MAIN...

  • Sheet Metal Technician Assembly

    5 months ago

    Fort Erie, Canada Airbus Full time

    The Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements. **Manufacturing Detailed Parts** - Performing sheet metal assembly operations that include a variety of complex parts,...

  • Sheet Metal Technician Assembly

    5 months ago

    Fort Erie, Canada Airbus Canada Full time

    The Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements. Manufacturing Detailed Parts Performing sheet metal assembly operations that include a variety of complex parts, details,...

  • Sheet Metal Technician

    5 months ago

    Fort Erie, Canada Airbus Full time

    **The Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements.** **MAIN RESPONSIBILITIES** **Manufacturing Detailed Parts** - **This position will be required to perform sheet metal...

  • Composite Assembly Technician

    6 months ago

    Fort Erie, Canada Airbus Full time

    Carry out the preparation of parts of variable dimensions using the techniques of molding, by stratification of pre-impregnated fabrics, by stratification of dry fabrics with resin impregnation, and by injection or infusion of resins (high performance composite materials of the type glass fiber, carbon, aramid, special resins...). To ensure the manufacture...

  • Assembly Technician

    1 day ago

    Fort Macleod, Canada Arjazon Seed Trading Ltd. Full time

    Job Title: Assembly Technician at Arjazon Seed Trading Ltd.Are you a detail-oriented and organized individual with a passion for mechanics? We are seeking an Assembly Technician to join our team at Arjazon Seed Trading Ltd.As an Assembly Technician, you will be responsible for assisting in the assembly and installation of heavy equipment, moving tools and...

  • Composite Assembly Inspector

    3 weeks ago

    Fort Erie, Ontario, Canada airbus Full time

    Job Summary:Job Title: Quality Assurance Composite Assembly InspectorJob Summary: We are seeking a highly skilled Quality Assurance Composite Assembly Inspector to join our team at Airbus Helicopters Canada Ltd. The successful candidate will be responsible for ensuring the quality of composite assemblies and components, and will work closely with our...

  • Structural Assembly Technician

    1 month ago

    Fort Erie, Ontario, Canada beBee Professionals Full time $45,000 - $65,000

    We are seeking a skilled Welder to work with our team at beBee Professionals in Canada. In this role, you will be responsible for performing welding tasks to fabricate and repair metal structures and components.Key Responsibilities:Read and interpret technical drawings and blueprints to ensure accurate fabrication and repair.Perform welding operations using...

  • Structural Assembly Technician

    1 month ago

    Fort Erie, Ontario, Canada beBee Professionals Full time $45,000 - $65,000

    We are seeking a skilled Welder to work with our team at beBee Professionals in Canada. In this role, you will be responsible for performing welding tasks to fabricate and repair metal structures and components.Key Responsibilities:Read and interpret technical drawings and blueprints to ensure accurate fabrication and repair.Perform welding operations using...

  • Composite Tooling Technician

    4 months ago

    Fort Erie, Canada Airbus Full time

    **The Composite Tooling Technician is responsible for the production ready state of all tooling; including masters, moulds, jigs, fixtures, templates and production aides. The incumbent will also provide recommendations for safety improvements, cost savings and new tooling initiatives.** **MAIN RESPONSIBILITIES** **Production - Tooling Readiness** -...

  • Composite Tooling Technician

    5 months ago

    Fort Erie, Canada Airbus Canada Full time

    The Composite Tooling Technician is responsible for the production ready state of all tooling; including masters, moulds, jigs, fixtures, templates and production aides. The incumbent will also provide recommendations for safety improvements, cost savings and new tooling initiatives. **MAIN RESPONSIBILITIES**: Production - Tooling Readiness Maintain...

  • Quality Assurance Composite Assembly Inspector

    2 weeks ago

    Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **MAIN RESPONSIBILITIES** **Assembly Inspection/Paint Inspection** - **Visual Inspection** - **Verify potting material shelf life** - **Verify that inserts, components, etc. are installed as per drawing.** - **Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.** - **Dust inclusions, orange peel, tears, sagging or...

  • Quality Assurance Composite Assembly Inspector

    4 months ago

    Fort Erie, Canada Airbus Full time

    **MAIN RESPONSIBILITIES** **Assembly Inspection/Paint Inspection** - **Visual Inspection** - **Verify potting material shelf life** - **Verify that inserts, components, etc. are installed as per drawing.** - **Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.** - **Dust inclusions, orange peel, tears, sagging or...

  • Quality Assurance Composite Assembly Inspector

    5 months ago

    Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIES Assembly Inspection/Paint Inspection Visual Inspection Verify potting material shelf life Verify that inserts, components, etc. are installed as per drawing. Visual Inspection for improper or insufficient coverage, rough surfaces, pitting. Dust inclusions, orange peel, tears, sagging or blistering. Inspecting parts to planned...

  • Electronics Technician

    5 months ago

    Fort Erie, Canada RMC INC Full time

    Electrical and Electronics Engineering Technologists and Technicians may work independently or provide technical support and services in the design, development, testing, production and operation of electrical and electronic equipment and systems. They are employed by electrical utilities, communications companies, manufacturers of electrical and electronic...

  • Precision Assembly Technician

    3 weeks ago

    Fort McMurray, Canada Randstad Canada Full time

    Job SummaryWe are seeking a skilled Precision Assembly Technician to join our team in Fort McMurray. As a key member of our shop team, you will be responsible for the assembly and disassembly of vital oilfield equipment. If you have prior experience with precision tools and are comfortable working with your hands, we encourage you to apply.Key...

  • Precision Assembly Technician

    4 weeks ago

    Fort McMurray, Canada Randstad Canada Full time

    Job SummaryWe are seeking a skilled Precision Assembly Technician to join our team in Fort McMurray. As a key member of our shop team, you will be responsible for assembling and disassembling vital oilfield equipment, assisting in shipping and receiving operations, and participating in overall shop operations and housekeeping.Key ResponsibilitiesAssemble and...

  • Precision Assembly Technician

    4 weeks ago

    Fort McMurray, Canada Randstad Canada Full time

    Job SummaryWe are seeking a skilled Precision Assembly Technician to join our team in Fort McMurray. As a key member of our shop team, you will be responsible for assembling and disassembling vital oilfield equipment, assisting in shipping and receiving operations, and participating in overall shop operations and housekeeping.Key ResponsibilitiesAssemble and...

  • Quality Assurance Composite Assembly Inspector

    5 months ago

    Fort Erie, Canada airbus Full time

    Job Description: MAIN RESPONSIBILITIESAssembly Inspection/Paint InspectionVisual InspectionVerify potting material shelf lifeVerify that inserts, components, etc. are installed as per drawing.Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.Dust inclusions, orange peel, tears, sagging or blistering.Inspecting parts  to...