Composite Assembly Technician
4 months ago
**This position reports directly to the Supervisor, Composite Assembly. The Composite Assembly Technician is responsible for assembly of helicopter parts through various joining and bonding methods. The Composite Assembly Technician fits parts together through the use of jigs, fixtures and using small hand and pneumatic tools.**
**MAIN RESPONSIBILITIES
**Production**:
- **Joining of composite to composite components through resin bonding, riveting, and fasteners**
- **Installation of fasteners to composites - nut plates and riv nuts**
- **Potting of inserts into core - core removal, surface preparation, insert bonding**
- **Joining of metallic components to composite through resin bonding, riveting, fasteners, etc.**
- **Proper locating of components to be joined through cleco use and back drilling**
- **Understanding of proper bonding techniques - surface preparation, resin mixing and curing methods**
- **Reworking of assemblies to remove minor imperfections**
- **Fitting of components to match drawing, MID or specifications for part**
- **Grinding, sanding, trimming parts to fit**
- **Dry fitting of parts for proper layout procedure prior to installation / bonding**
- **Ensuring proper torque values are met, torque striping of connections and safety wiring as required.**
- **Working knowledge of IFMA’s and EI’s (specifications).**
- **Ensure all production orders are completed fully and properly with all traceability for all components.**
- **High attention to detail and mechanical ability.**
**Departmental Involvement**:
- **Troubleshooting and recommendations for process/tooling/ergonomic/safety improvements**
- **Foster health and safety in the workplace and knowledge of health and safety requirements.**
- **Demonstrate standard work practices to ensure quality standards are met**
- **Ensure work areas and equipment kept clean and neat - 5S and FOD free**
- **Assist with work station set up**
**MINIMUM JOB REQUIREMENTS**
**Education**
- **High school diploma or equivalent**
**Knowledge, Skills, Demonstrated Capabilities**:
- **Knowledge of the operations processes and 3 years of experience performing them**
- **Experience using small hand tools such as clamps, rivet guns, drills, grinders, taps, wrenches, knives and screwdrivers**
- **Ability to understand quality requirements and how to effectively meet quality standards**
- **Teamwork focus**
- **Attention to detail**
- **Follow standardized work instructions**
- **Be able to use measuring instruments and ability to read blueprint**
- **Mechanical aptitude**
- **Service minded**
- **Experience in aerospace industry preferred**
- **Organized Individual**
- **Work independently under general supervision**
- **Troubleshooting**
- **Must be able to legally work in Canada**
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.
**Company**:
Airbus Helicopters Canada Ltd
**Employment Type**:
Permanent**Experience Level**:
Entry Level
**Job Family**:
Composite Manufacturing
At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
-
Composite Assembly
4 weeks ago
Fort Erie, Canada Airbus Helicopters Canada Ltd Full time**This position reports directly to the Supervisor, Composite Assembly. The Composite Assembly Technician is responsible for assembly of helicopter parts through various joining and bonding methods. The Composite Assembly Technician fits parts together through the use of jigs, fixtures and using small hand and pneumatic tools.** **MAIN...
-
Composite Assembly Technician
7 months ago
Fort Erie, Canada Airbus Full timeCarry out the preparation of parts of variable dimensions using the techniques of molding, by stratification of pre-impregnated fabrics, by stratification of dry fabrics with resin impregnation, and by injection or infusion of resins (high performance composite materials of the type glass fiber, carbon, aramid, special resins...). To ensure the manufacture...
-
Composite Repair Technician
4 months ago
Fort Erie, Canada Airbus Helicopters Canada Ltd Full time**This position reports directly to the Supervisor, Composite Assembly. **The Composite Repair Technician is responsible for Repairing of various helicopter parts using a variety of different materials and resins depending on the parts and the repair instruction provided. The Composite Repair Technician will use small hand and pneumatic tools for surface...
-
Fabrication,assembly,bond Technicians
7 months ago
Fort Erie, Canada Fleet Canada Inc Full timeAssembly Fitters This is an hourly position in which you are responsible for ensuring the work is performed to drawing dimensions and customer specifications. Parts are assembled using a wide variety of techniques, both pre-fabricated and composite materials. Must have knowledge of blueprints and the use of various tools and measuring instruments (verniers,...
-
Composite Paint Technician
4 months ago
Fort Erie, Canada Airbus Canada Full timeReporting to the Supervisor, Composite Prep & Paint, the Composite Paint Technician applies paint to composite or metallic panels (parts) in accordance to Airbus Helicopters (AH) process specifications. Masking parts may also be required. **MAIN RESPONSIBILITIES**: Painter picks all parts from the rack that require the same paint process Ensure dust and...
-
Composite Paint Technician
4 months ago
Fort Erie, Canada Airbus Helicopters Canada Ltd Full timeReporting to the Supervisor, Composite Prep & Paint, the Composite Paint Technician applies paint to composite or metallic panels (parts) in accordance to Airbus Helicopters (AH) process specifications. Masking parts may also be required. **MAIN RESPONSIBILITIES** - Painter picks all parts from the rack that require the same paint process - Ensure dust and...
-
Quality Assurance Composite Assembly Inspector
2 months ago
Fort Erie, Canada Airbus Helicopters Canada Ltd Full time**MAIN RESPONSIBILITIES** **Assembly Inspection/Paint Inspection** - **Visual Inspection** - **Verify potting material shelf life** - **Verify that inserts, components, etc. are installed as per drawing.** - **Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.** - **Dust inclusions, orange peel, tears, sagging or...
-
Composite Sanding Technician
4 months ago
Fort Erie, Canada Airbus Helicopters Canada Ltd Full time**This position reports directly to the Supervisor, Composite Prep & Paint. The Composite Sanding Technician is responsible for sanding and filling all aircraft composite panels (parts) as part of the preparation for painting and priming.** **MAIN RESPONSIBILITIES** **Sanding Composite Panels**: - **Pick parts from buffer rack according to the priority...
-
Composite Tooling Technician
7 months ago
Fort Erie, Canada airbus Full timeJob Description: The Composite Tooling Technician is responsible for the production ready state of all tooling; including masters, moulds, jigs, fixtures, templates and production aides. The incumbent will also provide recommendations for safety improvements, cost savings and new tooling initiatives.MAIN RESPONSIBILITIESProduction - Tooling...
-
Quality Assurance Composite Assembly Inspector
7 months ago
Fort Erie, Canada airbus Full timeJob Description: MAIN RESPONSIBILITIESAssembly Inspection/Paint InspectionVisual InspectionVerify potting material shelf lifeVerify that inserts, components, etc. are installed as per drawing.Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.Dust inclusions, orange peel, tears, sagging or blistering.Inspecting parts to...
-
Composite and Bonding Lay Up Inspector
7 months ago
Fort Erie, Canada Fleet Canada Inc Full timeOverview: We are currently seeking an experienced Inspector to join our team. As an Inspector, you will play a crucial role in ensuring the quality and accuracy of our products through meticulous inspection and analysis. This is a full-time position with opportunities for growth and advancement. **Duties**: 1. Verify materials are used within allotted...
-
Electronics Technician
6 months ago
Fort Erie, Canada RMC INC Full timeElectrical and Electronics Engineering Technologists and Technicians may work independently or provide technical support and services in the design, development, testing, production and operation of electrical and electronic equipment and systems. They are employed by electrical utilities, communications companies, manufacturers of electrical and electronic...
-
Methods Planner
3 months ago
Fort Erie, Canada AAA Canada Full time**JOB DESCRIPTION** **Responsibilities** - Analyze and read Aerospace prints - Prepare planning associated with the parts - Develop manufacturing procedures for assembly, composites and manufacturing - Estimate costs for assembly, composites and manufacturing using an engineering model - Obtain cost and material estimates from sub-contractors - Plan flow of...
-
Methods Planner
7 months ago
Fort Erie, Canada Fleet Canada Inc Full time**Job description** **Fleet Canada** **Inc.**is a fast paced, growing Aero-structures manufacturer located in Fort Erie. We are a build to print facility with a 500,000 sq ft facility, manufacturing sheet-metal, machined and composite parts and assemblies for several major aerospace OEMs. Fleet is in the midst of a modernization transition and is looking...
-
Aircraft Technician Specialist
2 weeks ago
Fort Erie, Ontario, Canada Morson Talent (Canada & USA) Full timeWe are seeking a skilled Aircraft Technician Specialist to join our team at Morson Talent (Canada & USA). The ideal candidate will have experience in assembling, inspecting, and maintaining aircraft, ensuring compliance with Transport Canada standards.The successful candidate will oversee the mechanical aspects of installation, conduct inspections, and...
-
Manufacturing Manager
3 months ago
Fort Erie, Canada Fleet Canada Inc Full time**About Us**: Fleet Canada Inc. is an equal opportunity employer in the aerospace manufacturing sector, committed to inclusive and barrier-free recruitment and work environments. Located in Fort Erie, our dynamic 500,000 sq ft build-to-print facility specializes in manufacturing sheet-metal, machined, and composite parts and assemblies for several major...
-
Precision Assembler Technician
3 months ago
Fort McMurray, Canada Randstad Canada Full timeAre you a mechanically inclined talent? Do you live in Fort McMurray or the surrounding area? Are you looking for a full-time position in a shop environment? This could be the opportunity you are looking for!I am looking to speak with energetic, and dedicated candidates for a full-time Precision Assembly Technician in Fort McMurray now. This role would...
-
Methods Planner
3 months ago
Fort Erie, Canada AAA Canada Full timeJOB DESCRIPTION AAA Canada is looking for a Methods planer with experience to join our team. The Candidate must have the ability to use computers and associated software (estimating program etc.) as well as the MRP system to carry out the objectives and work to be performed, stated above. The ability to read, understand and correctly interpret technical...
-
Repair and Overhaul Technician
6 months ago
Fort Erie, Canada Airbus Canada Full timeWE'RE LOOKING FOR A REPAIR AND OVERHAUL TECHNICIAN **POSITION LOCATION**: FORT ERIE, ONTARIO The Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul work while ensuring on time, on cost, and on quality. The Repair and Overhaul Technician...
-
Repair and Overhaul Technician
6 months ago
Fort Erie, Canada Airbus Helicopters Canada Ltd Full time**_WE’RE LOOKING FOR A REPAIR AND OVERHAUL TECHNICIAN _** **_POSITION LOCATION: FORT ERIE, ONTARIO _** The Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul work while ensuring on time, on cost, and on quality. The Repair and Overhaul...