Stamping Production

1 week ago

Stratford, Ontario, Canada FIO Automotive Full time $21,900 - $45,000 per year

Start Date:

This position has an expected start date of February 2026.

Overtime:

  • Overtime 1.5 x x paid after 38.33 hours
  • Double time 2.0 x paid after 46 hours

Positions within the Stamping Production department FIO's skill based pay program. The skill based pay program rewards team members that have acquired certain skills within their job and a premium percentage is then added to their hourly rate of pay.

Skill Based Premium

Press Operator

Level 1 - Press Operators are evaluated and scored based on a competency matrix. If the skills are met, the team member will receive 2.5% on their base rate of pay.

Starting rate - Eg. $21.90 (base rate) + 2.5% = $22.45

Level 2 – An additional 2.5% increase on the base rate of pay will be given once eligible based on the competency matrix and has completed a minimum of 12 months in a press operator role

Team members that are trained in both positions will only be eligible for one premium.

Job Description:

Major Responsibilities:

  • Wear uniform and Personal Protective Equipment as per standards (OHSA & FIO Guidelines)
  • Prepare for work: Clock in before shift start and read role assignment at Zone Control Board (ZCB).
  • Listen to Team Leader communicating alerts and change point notes about your work. Sign to acknowledge any alerts or changes.
  • Look for hazards: workplace condition, equipment, and activities. Report any safety concerns.
  • Enter Team Member number or apply fob to sign onto a process or equipment to record your presence.
  • Perform process check as per criteria and record results. Report any failed checks.
  • Follow Standardized Work Chart (SWC) and Operator Instructions (OIC), Product Quality Confirmation (PQC) and Packing Instruction (PKI) as trained.
  • Call AGC or forklift for packaging. Present carts, hopper for lift trucks to exchange.
  • Call Team Leader if the process stops or an abnormality is found. Help investigate the cause.
  • Report all safety incidents: property damage, wellness concern, injury, and near miss situations.
  • Isolate suspect or non-conforming product; sort parts as per PQC; grind burrs and splits.
  • Assist the Press Operator with finger installation.
  • Follow downtime plan when press stops: Do "5S" tasks and/or perform TPM (Total Preventative Maintenance) if trained.
  • Complete production reports. Compare result against target. Report to shift end meeting.
  • Attend communication meetings for Stamping department and Company.
  • Support flexible overtime schedules including early start, staying late, and weekends as required.
  • Demonstrate understanding of Emergency Preparedness Response Plan (EPRP).
  • Demonstrate understanding of FIO's Environmental Policy and participate in programs that enhance environmental performance.
  • Make suggestions for continual improvement "kaizen". Participate in Kaizen activities.
  • Train to perform 4 or more roles within the stamping department.
  • Train other Team Members when deemed competent by your Group Leader.
  • Other duties as assigned by Group Leader or Management.

Minimum Qualifications:

  • Grade 12 or equivalent.
  • FIO New TM Orientation Training
  • Able to perform based on the physical demand's analysis
  • Strong attention to detail
  • Sound judgment in problem solving and establishing priorities
  • Excellent interpersonal skills

Skills and Abilities

  • Basic communication and interpersonal skills
  • Focused: completes tasks in allotted time.
  • Strong manual dexterity to handle small and large objects.
  • Strong Endurance: Able to work for long period of time (up to 240 minutes).
  • Tolerant of industrial work environment for long period of time (12 hours).

FIO Automotive Canada Corporation is proud to provide employment accommodation during the recruitment process. Should you require any accommodations, please indicate this on your application/cover letter and we will work with you to meet your accessibility needs.

Please note: As part of our hiring process, we utilize AI-assisted tools to help organize and review applications.

Job Types: Full-time, Permanent, Fixed term contract

Pay: From $21.90 per hour

Benefits:

  • Company pension
  • Dental care
  • Disability insurance
  • Extended health care
  • Life insurance
  • On-site parking
  • Tuition reimbursement
  • Vision care

Application question(s):

  • Have you ever been convicted of a criminal offence for which a record suspension (formerly pardon) has not been granted?
  • Are you 18 years of age or older?
  • Are you legally authorized to work in Canada?

Work Location: In person

  • Stamping Production Team Member

    1 week ago

    Stratford, Ontario, Canada FIO Automotive Full time $113,880 per year

    Start Date:This position has an expected start date of February 2026.Overtime:Overtime 1.5 x x paid after 38.33 hoursDouble time 2.0 x paid after 46 hoursPositions within the Stamping Production department FIO's skill based pay program. The skill based pay program rewards team members that have acquired certain skills within their job and a premium...

  • Manufacturing Engineer

    1 week ago

    Stratford, Ontario, Canada itec group Inc. Full time $60,000 - $100,000 per year

    Position Overview:The Manufacturing Engineer will support daily production operations, lead problem-solving activities, and drive continuous improvements within a high-volume automotive manufacturing environment. This role focuses on optimizing stamping processes, improving equipment performance, supporting maintenance teams, and contributing to successful...

  • Tool & Die Toolmaker

    2 days ago

    Stratford, Ontario, Canada Omex Manufacturing Full time $60,000 - $90,000 per year

    POSITION OVERVIEW:The Tool & Die Maker will work closely with the Toolroom Supervisor and the production team to support on-going production requirements at Omex Manufacturing ULC. The position requires the Tool & Die Maker to complete preventative maintenance, adjustments and improvements to a variety of tools, fixtures and jigs with a strong focus on...

  • Robotics Technician

    1 week ago

    Stratford, Ontario, Canada itec group Inc. Full time $65,000 - $85,000 per year

    This role is responsible for maintaining and optimizing automated stamping and welding systems in a high-volume manufacturing environment. The Robotics Technician handles mechanical, electrical, and PLC-based troubleshooting for robots, presses, and peripheral equipment while ensuring production runs smoothly and safely. They perform preventive and...

  • Experienced Overhead Crane Operator

    2 days ago

    Stratford, Ontario, Canada FIO Automotive Full time $80,000 - $104,000 per year

    Pay rate: $21.90/hr to startShift Premium: $1.00/hrOVERTIME PAYOvertime 1.5 x x paid after 38.33 hoursDouble time 2.0 x paid after 46 hoursPositions within the Stamping Production department FIO's skill based pay program. The skill based pay program rewards team members that have acquired certain skills within their job and a premium percentage is then added...

  • Robotic Welding Team Member

    1 week ago

    Stratford, Ontario, Canada FIO Automotive Full time $43,200 - $48,000 per year

    FIO Automotive Canada supplies high quality welded assemblies for integration into mass production automobiles. The highly automated welding process permanently joins stamped components in a cost effective process. Team members set components into jigs to control assembly dimensions. Robotic welding systems apply one of three types of welding processes:...

  • Stamping Production

    3 days ago

    Stratford, Canada FIO Automotive Canada Corporation Full time

    **Position**:Stamping Production Team Member **Reports to**: Stamping Production Group Leader **Pay rate: $21.30/hr to start** **Shift Premium: $1.00/hr** **OVERTIME PAY** - _Overtime 1.5 x paid after 38.33 hours_ - _Double time 2.0 x paid after 46 hours_ Positions within the Stamping Production department FIO’s skill based pay program. The skill...

  • Stamping Production

    3 days ago

    Stratford, Canada FIO Automotive Canada Corporation Full time

    **Start Date**: This position has an expected start date of February 2026. **Overtime**: - _Overtime 1.5 x x paid after 38.33 hours_ - _Double time 2.0 x paid after 46 hours_ Positions within the Stamping Production department FIO’s skill based pay program. The skill based pay program rewards team members that have acquired certain skills within their...

  • Manufacturing Engineer, Stamping

    6 days ago

    Stratford, Canada itec group Inc. Full time

    A leading manufacturing consultancy in Ontario is seeking a Senior Recruitment Consultant to support daily production operations and drive continuous improvements within an automotive manufacturing environment. The ideal candidate will have a Bachelor's degree in Mechanical or Manufacturing Engineering, along with over 4 years of experience in high-volume...

  • Manufacturing Engineer, Stamping

    5 days ago

    Stratford, Canada itec group Inc. Full time

    A leading manufacturing consultancy in Ontario is seeking a Senior Recruitment Consultant to support daily production operations and drive continuous improvements within an automotive manufacturing environment. The ideal candidate will have a Bachelor's degree in Mechanical or Manufacturing Engineering, along with over 4 years of experience in high-volume...

  • Tool & Die Toolmaker

    1 week ago

    Stratford, Canada Omex Manufacturing ULC Full time

    **POSITION OVERVIEW**: -The Tool & Die Maker will work closely with the Toolroom Supervisor and the production team to support on-going production requirements at Omex Manufacturing ULC. The position requires the Tool & Die Maker to complete preventative maintenance, adjustments and improvements to a variety of tools, fixtures and jigs with a strong focus...

  • Manufacturing Engineer

    6 days ago

    Stratford, Canada itec group Inc. Full time

    Senior Recruitment Consultant | kate@itecgroup.ca Position Overview: The Manufacturing Engineer will support daily production operations, lead problem‑solving activities, and drive continuous improvements within a high‑volume automotive manufacturing environment. This role focuses on optimizing stamping processes, improving equipment performance,...

  • Manufacturing Engineer

    5 days ago

    Stratford, Canada itec group Inc. Full time

    Senior Recruitment Consultant | Position Overview: The Manufacturing Engineer will support daily production operations, lead problem‑solving activities, and drive continuous improvements within a high‑volume automotive manufacturing environment. This role focuses on optimizing stamping processes, improving equipment performance, supporting maintenance...

  • Production Operator

    6 days ago

    Stratford, Canada Hendrickson Canada ULC Full time

    Hendrickson Spring is hiring Production Operators. Please read full job description and employment details below. - Provide proof you have completed highschool or GED. - Will be flexible to be placed on either afternoon or night shift - Proven Mathematical, Mechanical, Measurement and Blueprint reading skills. - Basic computer skills - Strong Mechanical...

  • Tool & Die Apprentice (Year 2/3)

    1 week ago

    Stratford, Canada Omex Manufacturing ULC Full time

    **Omex Manufacturing, ULC** located in **Stratford, Ontario**, produces automotive parts for several major manufacturers, and our product portfolio includes a wide array of stamped, welded, and assembled components. * General Duties & Responsibilities: * - Investigate and participate in the prevention of problems/issues - Repairing and maintaining...

  • Tool & Die Apprentice (Year 2/3)

    1 week ago

    Stratford, Canada Omex Manufacturing ULC Full time

    **Omex Manufacturing, ULC** located in **Stratford, Ontario**, produces automotive parts for several major manufacturers, and our product portfolio includes a wide array of stamped, welded, and assembled components. * General Duties & Responsibilities: * - Investigate and participate in the prevention of problems/issues - Repairing and maintaining...