Spotter, Injection Molding

7 days ago

Windsor, Canada ABC Technologies Full time

**Job Summary**:
A Spotter is responsible to check the contact surfaces between the moving side and the stationary side. Spotters use colourants to identify which surfaces are making contact, and which are not.

**Responsibilities**:
Your supervisor may from time to time ask you to perform other related duties not specifically included in this job description. This job's key responsibilities include:

- **Task Preparation and Execution**: The Spotter is responsible to prepare the tool for spotting both mechanisms and parting line, as appropriate. The Spotter is responsible to heat up the mold and maintain proper temperature controls using a thermolator. The Spotter is responsible to perform any handwork required for opening vents, mastering pockets, and stoning parting lines. The Spotter is also responsible to understand different plastic material properties and understand how that impacts the spotting process. Fitting and timing parting line straight and pressure locks is also the responsibility of the Spotter.
- **Quality Control**:Spotting involves reviewing the steel conditions for defects, such as surface imperfections, or dimensional inaccuracies The Spotter must be trained to recognize quality issues and take corrective measures to maintain product quality standards.
- **Workplace Safety**:The Spotter must adhere to all safety protocols and procedures to ensure a safe working environment for themselves and their colleagues.
- ** Documentation**:The Spotter may be responsible for maintaining accurate records of production data, quality inspection results, and any issues encountered during the spotting process. This documentation helps to track performance metrics and identify areas for improvement.

**Job Qualifications**:

- ** Education**: minimum is a High School Diploma or General Educational Development (GED) equivalent.
- **Technical skills**: 3 years of spotting experience with preference for those with multi-shot rotational tool spotting.
- ** Technical knowledge**: Vertical mill (Fly Cutting, Drilling, etc.), two shot compression, icing line seal off on lighting tools. Mold making experience, welding ability, and knowledge of tool build would be considered an asset.
- **Attention to Detail**: Spotting requires keen observation skills and the ability to identify defects or abnormalities in steel that will carry over into the molded parts. Attention to detail is essential for maintaining quality standards.
- ** Manual Dexterity**: The ability to handle and manipulate small parts and perform manual tasks such as grinding and fitting.

**Why ABC?**

In addition to a workplace that emphasizes respect, teamwork and personal and professional growth, ABC Technologies offers a broad range of health, wellness and financial benefits that promote the physical, mental and financial wellbeing of our employees and help them bring their best self to work, including:

- Competitive compensation package
- Competitive PTO Package
- Employee Group Benefits
- Employee and Family Assistance Program (TELUS Health)
- RRSP/DPSP Company Match
- Educational Assistance Program
- Perkopolis Program
- Vehicle Purchase Discounts
- Social events throughout the year
- Internal job opportunities

  • Application Engineer

    4 weeks ago

    Windsor, Canada MEDA Engineering and Technical Services, LLC Full time

    Location: Windsor, ON, CanadaJob Type: Full-Time RegularIndustry: MechanicalPosition ID: 13958Job DescriptionOn behalf of our industry-leading client, we seek an Application Engineer to work with clients and develop solutions to their molding needs.NOTE:Must be willing and able to travel to the USA and Mexico, without restrictions, effective on the start...

  • Molding Machine Operator

    2 weeks ago

    Windsor, Ontario, Canada Plasman Full time

    Plasman: A Global Leader in Automotive ComponentsAt Plasman, we are seeking a highly skilled Molding Machine Operator to join our team. As a key member of our production team, you will be responsible for operating injection molding press and assembly equipment in a safe and productive manner.Key Responsibilities:Operate injection molding press and assembly...

  • Molding Technician

    1 month ago

    Windsor, Ontario, Canada Plasman Full time

    Join Plasman's Team as a Molding TechnicianPlasman is a leading global automotive and manufacturing company with a rich history dating back over 40 years. We are committed to offering a wide range of prospects to our employees, including competitive salaries, full-time permanent positions, benefits, company savings plans, recognition awards, hands-on...

  • Molding Technician

    1 month ago

    Windsor, Ontario, Canada Plasman Full time

    Join Plasman's Team as a Molding TechnicianPlasman is a leading global automotive and manufacturing company with a rich history dating back over 40 years. We are committed to offering a wide range of prospects to our employees, including competitive salaries, full-time permanent positions, benefits, company savings plans, recognition awards, hands-on...

  • Mold Maker

    2 months ago

    Windsor, Canada NextGen Mold Technologies Inc. Full time

    We are looking to add an experienced Mold Maker to our team. **Job Duties** - Build and assemble plastic injection molds of all sizes (small, medium, large, prototypes) - Complete understanding of hydraulics, manifolds, welding and spotting - Ensure high standards of workmanship and efficiency - Ensure outputs meet production schedules, safety and quality...

  • Set-Up Technician Molding Specialist

    4 weeks ago

    Windsor, Ontario, Canada Plasman Full time

    Join Plasman's Team as a Molding TechnicianPlasman is a leading global automotive and manufacturing company with a rich history dating back over 40 years. We are committed to offering a wide range of prospects to our employees, including competitive salaries, full-time permanent positions, benefits, company savings plans, recognition awards, hands-on...

  • Mold Setter

    5 months ago

    Windsor, Canada Stratus Plastics International Inc Full time

    The mold setter is responsible for setting molds and starting presses with the established process. Maintenace is included in this position as well, as there are only a few mold changes per day. The position reports to the shift supervisor for daily assignments. Technical support and direction are provided by the Lead Processer. - **KEY...

  • Mold Setter

    5 months ago

    Windsor, Canada Stratus Plastics International Inc Full time

    The mold setter is responsible for setting molds and starting presses with the established process. Maintenace is included in this position as well, as there are only a few mold changes per day. The position reports to the shift supervisor for daily assignments. Technical support and direction are provided by the Lead Processer. - **KEY...

  • Process Technician Molding Specialist

    1 month ago

    Windsor, Ontario, Canada Plasman Full time

    Join Plasman's Team as a Molding Process TechnicianWe are seeking a skilled and motivated Molding Process Technician to join our team at Plasman. As a key member of our manufacturing team, you will be responsible for ensuring the efficient and effective operation of our molding processes.Key Responsibilities:Set up and operate molding equipment to produce...

  • Process Technician Molding Specialist

    1 month ago

    Windsor, Ontario, Canada Plasman Full time

    Join Plasman's Team as a Molding Process TechnicianWe are seeking a skilled and motivated Molding Process Technician to join our team at Plasman. As a key member of our manufacturing team, you will be responsible for ensuring the efficient and effective operation of our molding processes.Key Responsibilities:Set up and operate molding equipment to produce...

  • Manufacturing Process Specialist Molding

    2 weeks ago

    Windsor, Ontario, Canada Plasman Full time

    Key ResponsibilitiesAs a Process Technician Molding at Plasman, you will be responsible for:Setting up molds as requiredEnsuring proper setup as per the Technical/Shift SupervisorMonitoring and adjusting processes to maintain quality and productivity levelsDirecting set-up technicians for their development and educationOperating overhead cranes safelySetting...

  • Process Technician Molding Specialist

    3 weeks ago

    Windsor, Ontario, Canada Plasman Full time

    Job Summary:We are seeking a skilled Process Technician Molding to join our team at Plasman. As a Process Technician Molding, you will be responsible for setting up molds, ensuring proper setup, and monitoring process adjustments to maintain quality and productivity levels.Key Responsibilities:Set up molds as requiredEnsure proper setup as set out by the...

  • Set-Up Technician Molding

    1 month ago

    Windsor, Canada Plasman Full time

    Plasman One Company, One Driving Force.Plasman is a leading global automotive and manufacturing company with several locations across North America and Europe. With a rich history dating back over 40 years, our collaborative approach, work ethic, and commitment have made us a global leader in automotive components. We believe the only thing that separates...

  • Application Engineer

    4 weeks ago

    Windsor, Ontario, Canada MEDA Engineering and Technical Services, LLC Full time

    Job Title: Application EngineerWe are seeking an experienced Application Engineer to join our team at MEDA Engineering and Technical Services, LLC. As an Application Engineer, you will work closely with clients to develop innovative solutions to their molding needs.Key Responsibilities:Collaborate with customers to create hot-runner solutions for complex...

  • Application Engineer

    4 weeks ago

    Windsor, Ontario, Canada MEDA Engineering and Technical Services, LLC Full time

    Job Title: Application EngineerWe are seeking an experienced Application Engineer to join our team at MEDA Engineering and Technical Services, LLC. As an Application Engineer, you will work closely with clients to develop innovative solutions to their molding needs.Key Responsibilities:Collaborate with customers to create hot-runner solutions for complex...

  • Application Specialist

    4 weeks ago

    Windsor, Ontario, Canada MEDA Engineering and Technical Services, LLC Full time

    At MEDA Engineering and Technical Services, LLC, we are seeking a skilled Application Specialist to join our team. As an Application Specialist, you will work closely with clients to develop innovative hot-runner solutions for complex injection molds.Key Responsibilities:Collaborate with customers to design and implement hot-runner solutions that meet their...

  • Process Setup Technician

    5 months ago

    Windsor, Canada Stratus Plastics International Full time

    SUMMARY Developing and improving the manufacturing processes to produce High Precision small to large injection molded parts. Work with management, technicians and operators to continually improve manufacturing process, decrease cycle times, optimize production, maximize throughput rate, increase product quality, mold change reduction time, minimize scrap,...

  • Account Executive

    2 months ago

    Windsor, Canada Sybridge Technologies Full time

    We’re looking for an Account Executive, based out of our Talbot2 location in the Windsor area! Join us at SyBridge Technologies and leverage your expertise to make a real difference in driving growth within the injection molding sector! **Corporate Profile** **About Crestview Partners** **Position Summary** The **Account Executive** will focus on...

  • Surface Modeler

    4 weeks ago

    Windsor, Canada ABC Technologies Full time

    **Job Summary**: A Surface Modeler in the Mold Design and manufacturing facility specializes in surfacing molds and mechanisms based off of customer supplied data/information. **Responsibilities**: Your supervisor may from time to time ask you to perform other related duties not specifically included in this job description. This job's key responsibilities...

  • Process Technician Molding

    1 month ago

    Windsor, Canada Plasman Full time

    Plasman One Company, One Driving Force.Plasman is a leading global automotive and manufacturing company with several locations across North America and Europe. With a rich history dating back over 40 years, our collaborative approach, work ethic, and commitment have made us a global leader in automotive components. We believe the only thing that separates...