Supervisor, Manufacturing Quality

4 weeks ago

Fort Erie, Canada Airbus Full time
Job Description:

MAIN RESPONSIBILITIES

Quality Control Responsibilities

Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list.

Ensure the weekly KPIs are met and take corrective actions to address any anomalies.

Managing any backlog with OT as needed.

Proactively identifying risks in the department to the attention of the Head of Quality.

Creation, approval and revision of Inspection Documents.

Ensure all Inspectors are adequately trained on Inspection Documents.

Ensure the validations of all First Article Inspections (FAIs) for all new / modified parts / products / kits manufactured by AHCA.

Supervise the creation and revision of Quality Assurance documentation (Delivery Documents, PVL, Demande d’ Accord).

Initiate NCs with Inspectors in a timely manner and manage containment of identified NCs.

Lead and support Cost of Non Quality KPIs by proactively engaging in timely Root Cause and Corrective Actions, Implementation of Curative and Corrective Actions and Improvement Workshops.

Ensure calibrated equipment assigned to QA are managed and returned for calibration on time.

Quality Assurance Responsibilities

Liaise with Manufacturing Engineering and AHCA Engineering for the satisfactory disposition of NCR’s.

Support role in authoring of Technical Notes and other planned deviations or Standard Repair documentation.

Support the review and ensure that processes are compliant to specifications for composite part manufacturing.

Support all Manufacturing Technicians in coaching them on the Inspection Acceptance Criteria.

Ensure tooling definition delivers expected part quality level, participate in the review of new tooling definition and documentation, conduct tooling conformity inspection and recurrent inspection

Participate in the validation and selection of materials, advise on part makeup (lay-up, bonding, surface protection) and cure cycles.

Participate as needed for Design Change Requests affecting composite manufacturing.

Provide oversight and feedback for AHCA generated manufacturing instructions to ensure compliance to engineering drawings.

Participate in the review, bid process of manufacturing work packages and interpretation of drawings, material specifications, manufacturing processes, etc., during the setup for new manufacturing.

Support Manufacturing Inspection related Internal and External Audit findings by identifying effective process based root causes and corrective actions.

Identifying opportunities to mitigate risks related to Human Factors.

Supporting all Objectives pertinent to Aviation Safety, Operational Health & Safety and Environmental Safety.

Conduct performance reviews for all inspectors and maintain their time cards including vacation requests and sick day approvals.

Identify and Implement Process Improvements

Identify relevant Quality Assurance Manufacturing Inspection training needs/opportunities

Proactively identify Manufacturing inspection risks and propose improvements to mitigate them.

Advocate and champion decisions based on data and support all Cost of Non Quality KPIs.

Advocate decisions based on identification of clear and objective requirements in Quality.

Promote and advocate quality achievement and performance improvement across the organization

EDUCATION & JOB REQUIREMENTS

College Diploma or equivalent in work experience & technical training

5 years’ experience in composite component manufacturing environments, preferably in aerospace.

5 years’ experience in the Quality Assurance field

3 years’ experience in a supervisory capacity considered an asset

Accurate, clear and timely completion of tasks necessary to develop aeronautical products.

Strong initiative and motivation necessary to work independently and in a team environment to drive development to achieve the highest standard of quality.

Ability to learn, understand and follow departmental and company procedures.

Ability to bring the context of long term strategic objectives and goals and apply them to day to day activities and decisions making.

Sound understanding of Quality Systems.

High level of understanding of the composite manufacturing and repair processes necessary to implement necessary controls and support all associated departments. Also assist in the production and improvements of components, analysis of processes and repairs to work in process.

Good understanding of CAD system, (CATIA V5 basics)

High level of understanding of AH material and process specifications

Ability to prepare and present comprehensive reports on Manufacturing Quality to customers (Airbus Helicopter) and Management

Must be able to legally work in Canada

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

Company: Airbus Helicopters Canada Ltd

Employment Type: Permanent

Experience Level: Professional

Job Family: Leadership
JF-FA-EM

By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.

Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to .

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #J-18808-Ljbffr

  • Supervisor, Manufacturing Quality

    4 weeks ago

    Fort Erie, Canada Airbus Full time

    **MAIN RESPONSIBILITIES** **Quality Control Responsibilities** - **Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list.** - **Ensure the weekly KPIs are met and take corrective actions to address any anomalies.** - **Managing any backlog with OT as needed.** -...

  • Supervisor, Manufacturing Quality

    2 weeks ago

    Fort Erie, Canada Airbus Full time

    **MAIN RESPONSIBILITIES** **Quality Control Responsibilities** - **Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list.** - **Ensure the weekly KPIs are met and take corrective actions to address any anomalies.** - **Managing any backlog with OT as needed.** -...

  • Supervisor, Manufacturing Quality

    2 weeks ago

    Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIES Quality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies. Managing any backlog with OT as needed. Proactively identifying...

  • Supervisor, Manufacturing Quality

    1 month ago

    Fort Erie, Ontario, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively identifying risks...

  • Supervisor, Manufacturing Quality

    4 weeks ago

    Fort Erie, Ontario, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively identifying risks...

  • Supervisor, Manufacturing Quality

    2 weeks ago

    Fort Erie, Ontario, Canada Airbus Full time

    Job Description:MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies. Managing any backlog with OT as needed. ...

  • Supervisor, Manufacturing Quality

    1 month ago

    Fort Erie, Canada airbus Full time

    Job Description: MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively...

  • Supervisor, Manufacturing Quality

    4 weeks ago

    Fort Erie, Canada airbus Full time

    Job Description: MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively...

  • Supervisor, Manufacturing Quality

    1 month ago

    Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively identifying risks...

  • Supervisor, Manufacturing Quality

    4 weeks ago

    Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively identifying risks...

  • Quality Supervisor-Composite Component Aerospace

    4 weeks ago

    Fort Erie, Canada Aerotek Full time

    Job Title: Quality SupervisorJob DescriptionAs a Quality Supervisor, you will provide weekly KPIs and priorities for every Inspector, ensuring that these KPIs are met and taking corrective actions when necessary. You will proactively identify risks in the department, create, approve and revise Inspection Documents, and ensure all Inspectors are adequately...

  • Supervisor - Manufacturing

    2 weeks ago

    Fort Erie, Canada Peninsula Plastics Ltd Full time

    Full-time, rotating shifts. Days, Afternoons, Nights. 2 weeks per shift. Great Benefits after 3 months. **Responsibilities**: - Oversee the process flow, keeping employee downtime and defects to a minimum - move from machine to machine, focusing on product quality, machine cycle times, scrap/defects, and operator performance - **Hands on position.** Must...

  • Manufacturing Supervisor

    3 weeks ago

    Fort Erie, Canada Fleet Canada Inc Full time

    Provides production support across all manufacturing units, and production visibility and status to Program Management (and customers), through, Production Control, Finished Part Stores tool stores and expediting functions. The following reflects the principal duties and shall not be construed as a detailed description of all work requirements, nor does it...

  • Manufacturing Manager

    2 months ago

    Fort Erie, Canada Fleet Canada Inc Full time

    **Fleet Canada** **Inc.**is a fast paced, growing Aero-structures manufacturer located in Fort Erie. We are a build to print facility with a 500,000 sq ft facility, manufacturing sheet-metal, machined and composite parts and assemblies for several major aerospace OEMs. Fleet is in the midst of a modernization transition and is looking for bright and...

  • Manufacturing Manager

    3 weeks ago

    Fort Erie, Canada Fleet Canada Inc Full time

    **Fleet Canada** **Inc.**is a fast paced, growing Aero-structures manufacturer located in Fort Erie. We are a build to print facility with a 500,000 sq ft facility, manufacturing sheet-metal, machined and composite parts and assemblies for several major aerospace OEMs. Fleet is in the midst of a modernization transition and is looking for bright and...

  • Buyer, Manufacturing

    2 weeks ago

    Fort Erie, Canada Abatement Technologies Full time

    **Primary Purpose**: The Buyer is responsible for the execution and efficient replenishment of inventory to meet forecasted customer demand and optimal inventory levels. **Essential Job Functions**: - Review replenishment suggestions and execute purchase orders for the manufacturing plant, ensuring timely processing to meet optimal stock levels and demand...

  • Manufacturing Manager

    1 week ago

    Fort Erie, Ontario, Canada Fleet Canada Inc Full time

    Fleet Canada Inc.is a fast paced, growing Aero-structures manufacturer located in Fort Erie.We are a build to print facility with a 500,000 sq ft facility, manufacturing sheet-metal, machined and composite parts and assemblies for several major aerospace OEMs.Fleet is in the midst of a modernization transition and is looking for bright and talented...

  • Manufacturing Manager

    2 months ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed as...

  • Manufacturing Manager

    4 weeks ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed as...

  • Production Supervisor

    3 weeks ago

    Fort Erie, Canada Sherwin-Williams Full time

    **Job Number**: 230000S3 **Fort Erie, Ontario** *** **|** *** **FORT ERIE, Ontario** *** **|** *** **CAN ON Fort Erie Plant, FORT ERIE** *** **Primary Location**:Fort Erie, Ontario L2A 2J7 **Travel**:Yes, 5 % of the Time **Schedule**:Full-time **Posted**:1/20/2023 **Description**: WELCOME TO SHERWIN-WILLIAMS Here, we believe there’s not one path to...