Supervisor, Manufacturing Quality

2 weeks ago

Fort Erie, Canada airbus Full time
Job Description:

MAIN RESPONSIBILITIES

Quality Control Responsibilities 

  • Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. 

  • Ensure the weekly KPIs are met and take corrective actions to address any anomalies.

  • Managing any backlog with OT as needed.

  • Proactively identifying risks in the department to the attention of the Head of Quality.

  • Creation, approval and revision of Inspection Documents.

  • Ensure all Inspectors are adequately trained on Inspection Documents.

  • Ensure the validations of all First Article Inspections (FAIs) for all new / modified parts / products / kits manufactured by AHCA.

  • Supervise the creation and revision of Quality Assurance documentation (Delivery Documents, PVL, Demande d’ Accord).

  • Initiate NCs with Inspectors in a timely manner and manage containment of identified NCs.

  • Lead and support Cost of Non Quality KPIs by proactively engaging in timely Root Cause and Corrective Actions, Implementation of Curative and Corrective Actions and Improvement Workshops.

  • Ensure calibrated equipment assigned to QA are managed and returned for calibration on time.

Quality Assurance Responsibilities 

  • Liaise with Manufacturing Engineering and AHCA Engineering for the satisfactory disposition of NCR’s.

  • Support role in authoring of Technical Notes and other planned deviations or Standard Repair documentation.

  • Support the review and ensure that processes are compliant to specifications for composite part manufacturing. 

  • Support all Manufacturing Technicians in coaching them on the Inspection Acceptance Criteria.

  • Ensure tooling definition delivers expected part quality level, participate in the review of new tooling definition and documentation, conduct tooling conformity inspection and recurrent inspection

  • Participate in the validation and selection of materials, advise on part makeup (lay-up, bonding, surface protection) and cure cycles.

  • Participate as needed for Design Change Requests affecting composite manufacturing.

  • Provide oversight and feedback for AHCA generated manufacturing instructions to ensure compliance to engineering drawings.

  • Participate in the review, bid process of manufacturing work packages and interpretation of drawings, material specifications, manufacturing processes, etc., during the setup for new manufacturing.

  • Support Manufacturing Inspection related Internal and External Audit findings by identifying effective process based root causes and corrective actions.

  • Identifying opportunities to mitigate risks related to Human Factors.

  • Supporting all Objectives pertinent to Aviation Safety, Operational Health & Safety and Environmental Safety.

  • Conduct performance reviews for all inspectors and maintain their time cards including vacation requests and sick day approvals.

Identify and Implement Process Improvements

  • Identify relevant Quality Assurance Manufacturing Inspection training needs/opportunities

  • Proactively identify Manufacturing inspection risks and propose improvements to mitigate them.

  • Advocate and champion decisions based on data and support all Cost of Non Quality KPIs.

  • Advocate decisions based on identification of clear and objective requirements in Quality. 

  • Promote and advocate quality achievement and performance improvement across the organization 


 

EDUCATION & JOB REQUIREMENTS

  • College Diploma or equivalent in work experience & technical training 

  • 5 years’ experience in composite component manufacturing environments, preferably in aerospace.

  • 5 years’ experience in the Quality Assurance field

  • 3 years’ experience in a supervisory capacity considered an asset

  • Accurate, clear and timely completion of tasks necessary to develop aeronautical products.

  • Strong initiative and motivation necessary to work independently and in a team environment to drive development to achieve the highest standard of quality.

  • Ability to learn, understand and follow departmental and company procedures.

  • Ability to bring the context of long term strategic objectives and goals and apply them to day to day activities and decisions making.

  • Sound understanding of Quality Systems.

  • High level of understanding of the composite manufacturing and repair processes necessary to implement necessary controls and support all associated departments. Also assist in the production and improvements of components, analysis of processes and repairs to work in process.

  • Good understanding of CAD system, (CATIA V5 basics)

  • High level of understanding of AH material and process specifications

  • Ability to prepare and present comprehensive reports on Manufacturing Quality to customers (Airbus Helicopter) and Management

  • Must be able to legally work in Canada

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

Company:

Airbus Helicopters Canada Ltd

Employment Type:

Permanent

-------

Experience Level:

Professional

Job Family:

Leadership

  • Supervisor, Manufacturing Quality

    2 weeks ago

    Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIES Quality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies. Managing any backlog with OT as needed. Proactively identifying...

  • Supervisor, Manufacturing Quality

    2 weeks ago

    Fort Erie, Ontario, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively identifying risks...

  • Supervisor, Manufacturing Quality

    1 day ago

    Fort Erie, Canada Airbus Full time

    Job Description: MAIN RESPONSIBILITIES Quality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies. Managing any backlog with OT as needed. ...

  • Supervisor, Manufacturing Quality

    2 weeks ago

    Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively identifying risks...

  • Supervisor - Manufacturing

    2 weeks ago

    Fort Erie, Canada Peninsula Plastics Ltd Full time

    Full-time, rotating shifts. Days, Afternoons, Nights. 2 weeks per shift. Great Benefits after 3 months. **Responsibilities**: - Oversee the process flow, keeping employee downtime and defects to a minimum - move from machine to machine, focusing on product quality, machine cycle times, scrap/defects, and operator performance - **Hands on position.** Must...

  • Manufacturing Manager

    1 month ago

    Fort Erie, Canada Fleet Canada Inc Full time

    **Fleet Canada** **Inc.**is a fast paced, growing Aero-structures manufacturer located in Fort Erie. We are a build to print facility with a 500,000 sq ft facility, manufacturing sheet-metal, machined and composite parts and assemblies for several major aerospace OEMs. Fleet is in the midst of a modernization transition and is looking for bright and...

  • Manufacturing Manager

    1 month ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed as...

  • Buyer, Manufacturing

    1 month ago

    Fort Erie, Canada Abatement Technologies Full time

    Abatement Technologies, a global company & industry leader in indoor air filtration & restoration equipment, is looking for an energetic and safety minded Buyer for our Fort Erie, ON location.We encourage you to apply if you want to join a growing company that provides innovative and reliable solutions to its customers.Primary Purpose: The Buyer is...

  • Manufacturing Manager

    1 month ago

    Fort Erie, ON, Canada The Wohl Group Full time

    Objective : To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed...

  • Supervisor, Service Coordination

    4 weeks ago

    Fort McMurray, Canada BGE Indoor Air Quality Solutions Ltd. Full time

    BGE Indoor Air Quality Solutions started from humble beginnings over 50 years ago has today provided filtration services to some of Canada’s best-run buildings. Our years of success in delivering clean air to clients is a result of the passion and drive that we have for our work and carry with us every day. The nature of delivering clean air leaves little...

  • Aircraft Structures Apprentice

    7 days ago

    Fort Erie, Canada Airbus Helicopters, Inc Full time

    **_WE'RE LOOKING FOR AN AIRCRAFT STRUCTURES APPRENTICE_** **_ POSITION LOCATION: FORT ERIE, ONTARIO_** The Aircraft Structures Apprentice is responsible for installing structural components and modifications, repairing/troubleshooting customer or company owned aircraft and assisting with the manufacturing of detailed parts when necessary. **MAIN...

  • Chief Quality Inspector

    1 month ago

    Fort Erie, Canada Fleet Canada Inc Full time

    **Job Summary**: A Chief Inspector oversees and coordinates inspection activities, ensuring compliance with regulations and standards. You will be responsible for ensuring that our products meet the highest quality standards through thorough inspections and data analysis. Your expertise in quality control and assurance will play a critical role in...

  • Production Control Specialist

    4 days ago

    Fort Erie, Canada Airbus Helicopters Canada Ltd Full time

    **_WE’RE LOOKING FOR A PRODUCTION CONTROL SPECIALIST _** **_Location: Fort Erie, ON _** The Production Control Specialist is responsible for developing and executing a Master Production schedule and generating Production Schedule. In accordance with the manufacturing build plan that is driven by the S&OP level loaded against available capacity. The...

  • Production Control Specialist

    24 hours ago

    Fort Erie, Ontario, Canada Airbus Canada Full time

    WE'RE LOOKING FOR A PRODUCTION CONTROL SPECIALIST Location: Fort Erie, ONThe Production Control Specialist is responsible for developing and executing a Master Production schedule and generating Production Schedule. In accordance with the manufacturing build plan that is driven by the S&OP level loaded against available capacity. The Production Control...

  • Production Control Specialist

    4 days ago

    Fort Erie, Canada airbus Full time

    Job Description: WE’RE LOOKING FOR A PRODUCTION CONTROL SPECIALIST Location: Fort Erie, ONThe Production Control Specialist is responsible for developing and executing a Master Production schedule and generating Production Schedule. In accordance with the manufacturing build plan that is driven by the S&OP level loaded against available capacity. The...

  • Supervisor, Roads and Stormwater Services

    1 month ago

    Fort Erie, Canada Town of Fort Erie Full time

    **Supervisor, Roads and** **Stormwater Services** Fort Erie is a diverse town on the Niagara River in the Niagara Region, Ontario. It is directly across the river from Buffalo, New York and is the site of Old Fort Erie. Fort Erie is one of Niagara’s fastest growing communities and has experienced a high level of residential and commercial growth in the...

  • Security Administrative Supervisor

    4 weeks ago

    Fort Erie, Canada National Port Security Services Full time

    **National Port Security Services Inc. - Ontario** **Job Location: Port Colborne** **National Port Security Services (NPSS) provides security services across Canada. The NPSS team is dedicated to excellent service through a partnership that reduces crime, creates a safe environment, builds trust, and enhances the quality of life in our client’s work...

  • Fur Manufacturing Machine Operator

    3 days ago

    Fort Smith, Canada Aurora Heat, Inc. Full time

    Are you passionate about sustainability, reconciliation, and natural products that reduce waste? Are you a strong collaborator and creative thinker? Are you eager to develop new skills while working in an inclusive, flexible, and development-focused environment? If you’ve answered “YES!” to these questions, then we want to hear from you! **About...

  • Production Control Specialist

    19 hours ago

    Fort Erie, Canada Airbus Canada Full time

    WE'RE LOOKING FOR A PRODUCTION CONTROL SPECIALIST Location: Fort Erie, ONThe Production Control Specialist is responsible for developing and executing a Master Production schedule and generating Production Schedule. In accordance with the manufacturing build plan that is driven by the S&OP level loaded against available capacity. The Production Control...

  • Quality Assurance Composite Assembly Inspector

    3 weeks ago

    Fort Erie, Ontario, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESAssembly Inspection/Paint InspectionVisual InspectionVerify potting material shelf lifeVerify that inserts, components, etc. are installed as per drawing.Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.Dust inclusions, orange peel, tears, sagging or blistering.Inspecting parts to planned MIDs and...