CNC Machinist

1 month ago

St Thomas, Ontario, Canada Masco Canada Limited Full time
CNC Technician Job Description

Job Summary: We are seeking a skilled CNC Technician to join our team at Masco Canada Limited. The successful candidate will be responsible for setting up, operating, and programming CNC machines to ensure production requirements are met.

Key Responsibilities:
  • Set up and operate CNC machines to produce high-quality products
  • Program and troubleshoot CNC machines to optimize production efficiency
  • Lead and train CNC operators in troubleshooting and correcting faults
  • Read and edit programs on CNC equipment with various controllers
  • Troubleshoot tooling and equipment issues
  • Fill out production sheets, tags, and Shoplogix
  • Produce products to the rates and standards as set out in the Work Order
  • Follow proper setup instructions and procedures (layouts)
  • Read and interpret production blueprints
  • Use appropriate gauges in order to produce products to quality standards
  • Report quality and/or tooling issues
  • Perform minor repairs on equipment as required
  • Ensure product is running at optimum cycle times according to standards
  • Edit and modify CNC computer programs as necessary
  • Communicate effectively with service technicians as required
  • Rotation through various work cells and shifts
Health and Safety:
  • Maintain a safe workplace
  • Wear Personal Protective equipment as required on the shop floor
  • Comply with the company policies, procedures, and OHSA (Occupational Health & Safety Act)
  • Participation is required in our internal responsibility system (right to know, right to refuse, right to participate)
  • Follow safe work and lockout / tagout procedures as required
  • Report unsafe conditions or hazards as soon as possible to your supervisor
  • Maintain a clean working environment
  • Adhere to and maintain WHMIS 2015 requirements
  • Annual medical surveillance may be required
Quality:
  • Follow all area work instructions and procedures in order to ensure quality standards are adhered to
  • Measure product with supplied gauging as outlined in the quality standards to ensure quality products are being made
  • Report any potentially defective or damaged products or packaging to the quality dept and your supervisor
  • Follow the control of non-conforming product procedure for any defective products found in your area
  • Use the vision system to complete first off inspection per run
Autonomous Maintenance:
  • Prior to start of shift, take 10 min to inspect your work cell to the cell specific AM requirements
  • Sign off on the AM checklist daily (initial and date)
  • Follow the Process Problem Solving and Escalation system as required for any issues found
5S:
  • Ensure your work area is maintained at required daily 5S standards
  • Take 5 minutes at the end of your shift to follow the daily 5S standards as posted in your work cell
  • Sign off on the 5S checklist daily (initial and date)
  • Correct any deviations from 5S standards immediately or write it down on the cell board for follow up
  • Support the monthly 5S clean up as required
Daily Management:
  • Input WO and production information as required into the Shoplogix system
  • Input scrap during shift on Shoplogix system (input the scrap code and quantity)
  • Input the correct downtime code for any downtime that the Shoplogix system identifies
  • Participate in DM meetings and problem solving on a weekly basis
  • Use cell level board and data to drive process problem solving and escalation
  • Communicate issues at the cell level board as required
Standard Work:
  • Follow Standard Work procedures as posted in the cell
  • Correct any deviations from standard work procedures immediately
Qualification:
  • Ability to read blueprints
  • Knowledge of programming is an asset
  • Ability to read, and comprehend various machine manuals
  • Ability to use various measuring devices
  • Ability to use JDE system (Work orders for products)
  • Knowledge of all quality related requirements for inspection
  • Ability to understand CNC machine programs and fault correction
  • Good math skills are required
  • Excellent computer skills
  • Ability to read and follow work instructions
  • Ability to read job packages and Work Orders
  • Technical background and general knowledge of machines
  • Knowledge and ability to do tool grinding
  • Excellent verbal, written, and interpersonal skills
  • Successful completion of all applicable pre-employment testing
  • Ability to work in a collaborative team environment
  • Must obtain a grade of 90% or better
Education:
  • O.S.S.D or equivalent
  • Having a passing grad of 90% or better on all testing requirements
Additional Skills / Knowledge Requirements / Other:
  • Complies with all company policies and procedures
  • Performs other tasks as assigned by management

  • CNC Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada Niagara Precision Full time

    Job SummaryWe are seeking a skilled CNC Machinist to join our team at Niagara Precision. As a CNC Machinist, you will be responsible for operating and programming CNC machines, as well as performing manual machine operations when required.Key ResponsibilitiesFollow company health and safety policies, including the use of personal protective equipmentReview...

  • CNC Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada Niagara Precision Full time

    Job SummaryWe are seeking a skilled CNC Machinist to join our team at Niagara Precision. As a CNC Machinist, you will be responsible for operating and programming CNC machines, as well as performing manual machine operations when required.Key ResponsibilitiesFollow company health and safety policies, including the use of personal protective equipmentReview...

  • CNC Machinist

    2 weeks ago

    St. Catharines, Ontario, Canada Recruit Without Borders Full time

    Job Title: CNC Machinist - Tooling SpecialistTriangle Die & Tool Co. Ltd. is seeking a skilled CNC Machinist to join our team. As a CNC Machinist, you will be responsible for setting up, operating, and adjusting programs on CNC grinding machines.Key Responsibilities:Set up and operate CNC grinding machines to produce high-quality toolingRead and interpret...

  • CNC Machinist

    1 month ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job Title: CNC TechnicianAt Masco Canada Limited, we are seeking a highly skilled CNC Technician to join our team. As a CNC Technician, you will be responsible for operating and maintaining CNC machines, programming and troubleshooting, and ensuring the highest quality of products.Key Responsibilities:Operate and maintain CNC machines, including setup,...

  • CNC Machinist

    1 month ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job Title: CNC TechnicianAt Masco Canada Limited, we are seeking a highly skilled CNC Technician to join our team. As a CNC Technician, you will be responsible for operating and maintaining CNC machines, programming and troubleshooting, and ensuring the highest quality of products.Key Responsibilities:Operate and maintain CNC machines, including setup,...

  • CNC Machinist

    1 week ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job Summary:Masco Canada Limited is seeking a skilled CNC Technician to join our team. As a CNC Technician, you will be responsible for setting up, operating, and programming CNC machines to ensure production requirements are met.Key Responsibilities:Set up and operate CNC machines to produce high-quality products.Program CNC machines to meet production...

  • CNC Machinist

    4 weeks ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    CNC Technician Job DescriptionJob Summary: We are seeking a skilled CNC Technician to join our team at Masco Canada Limited. As a CNC Technician, you will be responsible for setting up, operating, and programming CNC machines to ensure production requirements are met.Key Responsibilities:Set up and operate CNC machines to produce high-quality productsProgram...

  • CNC Machinist

    4 weeks ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    CNC Technician Job DescriptionJob Summary: We are seeking a skilled CNC Technician to join our team at Masco Canada Limited. As a CNC Technician, you will be responsible for setting up, operating, and programming CNC machines to ensure production requirements are met.Key Responsibilities:Set up and operate CNC machines to produce high-quality productsProgram...

  • CNC Machinist

    2 weeks ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job SummaryMasco Canada Limited is seeking a highly skilled CNC Technician to join our team. As a CNC Technician, you will be responsible for setting up, operating, and programming CNC machines to ensure production requirements are met.Key ResponsibilitiesSet up and operate CNC machines to produce high-quality productsProgram and troubleshoot CNC machines to...

  • Manual Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada CB Canada Full time

    Manual Machinist Job DescriptionCB Canada is seeking a skilled Manual Machinist to join their team in St. Catharines. As a Manual Machinist, you will be responsible for reading and interpreting blueprints, job planning and execution, quality control, and using machining techniques, manual and some CNC.Key Responsibilities:Read and interpret blueprints to...

  • Manual Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada CB Canada Full time

    Manual Machinist Job DescriptionCB Canada is seeking a skilled Manual Machinist to join their team in St. Catharines. As a Manual Machinist, you will be responsible for reading and interpreting blueprints, job planning and execution, quality control, and using machining techniques, manual and some CNC.Key Responsibilities:Read and interpret blueprints to...

  • Manual Machinist

    3 weeks ago

    St. Catharines, Ontario, Canada CB Canada Full time

    Manual Machinist Job DescriptionCB Canada is seeking a skilled Manual Machinist to join their team in St. Catharines. As a Manual Machinist, you will be responsible for reading and interpreting blueprints, job planning and execution, quality control, and using machining techniques, manual and some CNC.Key Responsibilities:Read and interpret blueprints to...

  • Manual Machinist

    3 weeks ago

    St. Catharines, Ontario, Canada CB Canada Full time

    Manual Machinist Job DescriptionCB Canada is seeking a skilled Manual Machinist to join their team in St. Catharines. As a Manual Machinist, you will be responsible for reading and interpreting blueprints, job planning and execution, quality control, and using machining techniques, manual and some CNC.Key Responsibilities:Read and interpret blueprints to...

  • Manual Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada CB Canada Full time

    Manual Machinist Job DescriptionAt CB Canada, we are seeking a skilled Manual Machinist to join our team. As a Manual Machinist, you will play a crucial role in ensuring the quality and precision of our products.Key Responsibilities:Read and interpret blueprints to plan and execute machining tasksOperate manual and CNC machining equipment to produce...

  • Manual Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada CB Canada Full time

    Manual Machinist Job DescriptionAt CB Canada, we are seeking a skilled Manual Machinist to join our team. As a Manual Machinist, you will play a crucial role in ensuring the quality and precision of our products.Key Responsibilities:Read and interpret blueprints to plan and execute machining tasksOperate manual and CNC machining equipment to produce...

  • Machinist - Triangle Die & Tool

    4 weeks ago

    St. Catharines, Ontario, Canada Recruit Without Borders Full time

    Job Title: Machinist - Triangle Die & ToolWe are seeking a skilled Machinist to join our team at Triangle Die & Tool Co. Ltd. in St Catharines, Ontario.Job Summary:The successful candidate will be responsible for setting up, operating, and adjusting programs on CNC grinding machines. They will also read and interpret blueprints and engineering drawings,...

  • Machinist - Triangle Die & Tool

    4 weeks ago

    St. Catharines, Ontario, Canada Recruit Without Borders Full time

    Job Title: Machinist - Triangle Die & ToolWe are seeking a skilled Machinist to join our team at Triangle Die & Tool Co. Ltd. in St Catharines, Ontario.Job Summary:The successful candidate will be responsible for setting up, operating, and adjusting programs on CNC grinding machines. They will also read and interpret blueprints and engineering drawings,...

  • CNC Machinist

    5 months ago

    St. Catharines, Canada High Strength Plates & Profiles Inc Full time

    HSPP is currently seeking an experienced CNC Machinist. We are looking for someone who has 3-5 years’ experience, working as a CNC Machinist, working with Steel Plate is an asset. We are looking for team players; HSPP works as a team to get our products to our customers. HSPP is an established family-owned and operated company with many long-term employees...

  • CNC (Computer Numerical Control) Machinist

    5 months ago

    St. Marys, Canada Echo-Tech Machine & Tool Ltd. Full time

    Work Term: Permanent - Work Language: English - Hours: 40 hours per week - Education: College/CEGEP - Experience: 5 years or more **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Set up and adjust production machineries/tools - Fit and assemble components and machine parts to close tolerance - Maintain, repair and...

  • CNC (Computer Numerical Control) Machinist

    5 months ago

    St. Marys, Canada Echo-Tech Machine & Tool Ltd. Full time

    Work Term: Permanent - Work Language: English - Hours: 40 hours per week - Education: College/CEGEP - Experience: 5 years or more **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Set up and adjust production machineries/tools - Fit and assemble components and machine parts to close tolerance - Maintain, repair and...

  • Machinist

    2 months ago

    St. Catharines, Canada Girotti Machine Full time

    **JOB DESCRIPTION** **Machinist** **Purpose**: The Machinist is self-motivated, and results driven individual who is organized, analytical with exceptional communication and team fostering skills. As a Machinist, you are committed to providing attentive support for internal parties, ensuring consistent, efficient operations according to Girotti Machine...

  • CNC Machinist

    2 weeks ago

    St. John's, Newfoundland and Labrador, Canada Kento Windows & Doors Full time

    Kento Windows & Doors Machinist Job DescriptionWe are seeking a skilled Machinist to join our team at Kento Windows & Doors. As a Machinist, you will be responsible for operating and maintaining machine tools to produce high-quality parts and components.RequirementsSecondary (high) school graduation certificate1 year to less than 2 years of experience in a...

  • Machinist and General Fabricator

    4 months ago

    West St Paul, Canada CanPat Builders LTD Full time

    Overview: **Responsibilities**: - Read and interpret blueprints to determine specifications and requirements - Set up and operate CNC machines to cut, shape, and form metal components - Use power tools, such as grinders and saws, to fabricate and assemble metal parts - Perform machining tasks, including drilling, tapping, and milling - Collaborate with team...

  • CNC (Computer Numerical Control) Machinist

    4 weeks ago

    St. Marys, Canada Echo-Tech Machine & Tool Ltd Full time

    Durée de l'emploi: Permanent - Langue de travail: Anglais - Heures de travail: 40 hours per week - Education: - Expérience: **Education**: - Registered Apprenticeship certificate **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Set up and adjust production machineries/tools - Fit and assemble components and machine...

  • General Machinist

    5 months ago

    St. Catharines, Canada Niagara Precision Limited Full time

    **About us** Niagara Precision Limited is a second generationn machine shop. From inception to present day, Niagara Precision Limited continues to specialize and excel in the CNC machining of tight tolerances and high precision components. Working closely with our customers, delivering quality and on-time products is our mission. Niagara Precision Limited...

  • Manual Machinist

    5 months ago

    St. Catharines, Canada CB Canada Full time

    Our client based in St. Catharines is looking for certified Manual Machinists to join their team. What's in it for you? Great teamFull time workPaid trainingBenefitsStaff eventsOpportunity for growth What will you be doing? Reading and interpreting blueprintsJob planning and executionQuality controlUsing machining techniques, manual and some CNCOther...

  • Machinist (Ft)

    5 months ago

    St. Marys, Canada All Equip Repair Full time

    All-Equip is a family-owned trailer Manufacturing, Fabrication and Repair company located in St. Mary’s, Ontario and Stratford, Ontario. Founded in 2011, All Equip has become a leader in Feed & Grain trailers for the Agriculture Industry. As a supplier of quality products and exceptional customer service, it’s our dedicated and hard-working people who...

  • Machinist (Ft)

    4 months ago

    St. Marys, Canada All Equip Repair Full time

    MUST HAVE A VALID CANDIAN WORK PERMIT **JOIN US FOR AN EMPLOYER EVENT** **WEDNESDAY NOVEMBER 15** **EMPLOYMENT RESOURCE CENTRE,** **26 WELLINGTON STREET,** **ST. MARYS, ON** **230pm TO 630pm** **BRING YOUR RESUME!!!!!** All-Equip is a family-owned trailer Manufacturing, Fabrication and Repair company located in St. Mary’s, Ontario and Stratford,...

  • CNC (Computer Numerical Control) Machinist

    5 months ago

    St. Albert, Canada Oil City Signs Full time

    Education: College, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 years - Experience: 1 year to less than 2 years **Work setting**: - General manufacturing **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Set up and adjust production machineries/tools - Fit and assemble components...

  • Manual/cnc Machine Operator

    5 months ago

    St. Catharines, Canada Right Machine Industrial Full time

    Right Machine Industrial has over 75 Years of manufacturing experience and solutions. We pride ourselves on providing quality, custom machined products to a wide range of customers in the manufacturing sector. Our dedication to quality and customer service is the driving force for our years of success. We are constantly looking for skilled tradesman and team...

  • CNC (Computer Numerical Control) Machinist

    5 months ago

    St. Albert, Canada Oil City Signs Full time

    Education: College, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 years - Experience: 1 year to less than 2 years **Work setting**: - General manufacturing **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Set up and adjust production machineries/tools - Fit and assemble components...

  • Machine Shop Charge Hand

    4 weeks ago

    St. Marys, Canada Echo-Tech Machine & Tool Ltd Full time

    Durée de l'emploi: Permanent - Langue de travail: Anglais - Heures de travail: 40 hours per week - Education: - Expérience: **Education**: - Registered Apprenticeship certificate **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Set up and adjust production machineries/tools - Fit and assemble components and machine...

  • Machinist - Triangle Die & Tool

    1 month ago

    St. Catharines, Canada Recruit Without Borders Full time

    Triangle Die & Tool Co. Ltd. manufactures forge tooling and rubber molds. We provide customers with quality tooling to meet their production standards. We are currently in need of a General Labourer._ **Triangle Die & Tool Co. Ltd.** **General Labourer - Manufacturing** **Key Duties and Responsibilities**: - Set-up, operate, adjust programs and offsets...

  • Machinist - Triangle Die & Tool

    1 month ago

    St. Catharines, Canada Recruit Without Borders Full time

    Triangle Die & Tool Co. Ltd. manufactures forge tooling and rubber molds. We provide customers with quality tooling to meet their production standards. We are currently in need of a General Labourer. Triangle Die & Tool Co. Ltd. General Labourer - Manufacturing Key Duties and Responsibilities: Set-up, operate, adjust programs and offsets on CNC grinding...