CNC Equipment Expert

4 weeks ago

St Thomas, Ontario, Canada Masco Canada Full time

1.0 Position Overview:

The CNC Technician is responsible for executing tasks within the MC Shop department, focusing on CNC machinery to meet production goals. This role encompasses setup, programming, and troubleshooting, all while ensuring a safe and efficient work environment that upholds product quality and production efficiency.

2.0 Key Responsibilities:

  • Setup, operate, program, and troubleshoot a variety of CNC machines.
  • Guide and mentor CNC operators in diagnosing and resolving issues.
  • Read and modify programs on CNC systems with different controllers.
  • Identify and rectify tooling and equipment challenges.
  • Complete production documentation, tags, and Shoplogix entries.
  • Manufacture products in accordance with specified rates and standards outlined in the Work Order.
  • Adhere to proper setup protocols and procedures.
  • Interpret production blueprints accurately.
  • Utilize appropriate measuring tools to ensure products meet quality benchmarks.
  • Report any quality or tooling concerns promptly.
  • Conduct minor repairs on machinery as necessary.
  • Ensure optimal machine cycle times are achieved.
  • Modify CNC computer programs as required.
  • Communicate effectively with service technicians when needed.
  • Rotate through various work cells and shifts as assigned.
  • Refer to the PDA for a detailed list of physical and environmental demands.

3.0 Health & Safety Responsibilities:

  • Maintain a safe working environment.
  • Wear required Personal Protective Equipment (PPE) on the shop floor.
  • Adhere to company policies, procedures, and the Occupational Health & Safety Act (OHSA).
  • Participate in the internal responsibility system.
  • Follow safe work and lockout/tagout protocols as necessary.
  • Report unsafe conditions or hazards to your supervisor immediately.
  • Keep the workspace clean and organized.
  • Comply with WHMIS 2015 regulations.
  • Annual medical surveillance may be required.

4.0 Quality Assurance:

  • Follow all work instructions to ensure adherence to quality standards.
  • Measure products using provided gauges to confirm quality compliance.
  • Notify the quality department and your supervisor of any defective or damaged products.
  • Implement procedures for controlling non-conforming products.
  • Utilize the vision system for initial inspections per production run.

5.0 Autonomous Maintenance:

  • Inspect your work cell according to specific Autonomous Maintenance requirements before your shift starts.
  • Complete and sign the AM checklist daily.
  • Follow the Process Problem Solving and Escalation system for any identified issues.

6.0 5S Standards:

  • Maintain your work area according to daily 5S standards.
  • Dedicate time at the end of your shift to uphold 5S standards.
  • Sign off on the 5S checklist daily.
  • Address any deviations from 5S standards immediately or document them for follow-up.
  • Participate in monthly 5S clean-up activities as required.

7.0 Daily Management:

  • Enter Work Order and production data into the Shoplogix system as required.
  • Record scrap data during your shift in the Shoplogix system.
  • Log downtime codes for any identified downtime in the Shoplogix system.
  • Engage in weekly DM meetings and problem-solving sessions.
  • Utilize cell-level data to drive process improvements.
  • Communicate issues on the cell-level board as necessary.

8.0 Standard Work Compliance:

  • Adhere to Standard Work procedures displayed in the work cell.
  • Address any deviations from standard work procedures immediately.

9.0 Qualifications:

  • Ability to read and interpret blueprints.
  • Programming knowledge is advantageous.
  • Capability to comprehend various machine manuals.
  • Proficiency in using various measuring instruments.
  • Familiarity with the JDE system for Work Orders.
  • Understanding of quality inspection requirements.
  • Ability to troubleshoot CNC machine programs.
  • Strong mathematical skills.
  • Excellent computer proficiency.
  • Ability to follow work instructions accurately.
  • Technical background and general machine knowledge.
  • Experience in tool grinding is beneficial.
  • Strong verbal, written, and interpersonal communication skills.
  • Successful completion of all relevant pre-employment assessments.
  • Ability to work collaboratively within a team environment.
  • Must achieve a minimum score of 90% on all testing requirements.

10.0 Educational Background:

  • O.S.S.D or equivalent educational qualifications.
  • A passing grade of 90% or better on all testing requirements.

11.0 Additional Skills and Knowledge:

  • Adherence to all company policies and procedures.
  • Perform other tasks as assigned by management.

The Company reserves the right to modify the above responsibilities based on operational needs and technological advancements.

Compensation Range: $29.71 Actual compensation may vary based on factors such as experience, education, geographic location, and skills.

Company: Masco Canada

Masco Canada is an equal opportunity employer committed to hiring the best candidates for every position. Employment decisions are made solely based on merit, and the Company prohibits discrimination in any employment opportunity based on various protected characteristics. This commitment applies to all individuals involved in the Company's operations, regardless of location, and prohibits unlawful discrimination by any employee.


#J-18808-Ljbffr

  • CNC Machine Specialist

    4 weeks ago

    St. Thomas, Ontario, Canada Masco Canada Full time

    1.0 Position Overview:The CNC Technician is responsible for executing tasks in the MC Shop department related to CNC machinery to fulfill production objectives. This role encompasses setup, programming, and troubleshooting of CNC equipment, ensuring that all operations are conducted safely and efficiently while maintaining product quality and meeting...

  • CNC Operations Technician

    4 weeks ago

    St. Thomas, Ontario, Canada Masco Canada Full time

    1.0 Position Overview:The role involves executing tasks within the MC Shop department related to CNC machinery to meet production targets. Responsibilities include setup, programming, and troubleshooting of CNC equipment, all performed in a safe and efficient manner to ensure product quality and production efficiency.2.0 Key Responsibilities:Setup, operate,...

  • Production Equipment Engineer

    7 days ago

    St. Thomas, Ontario, Canada Magna Full time

    About the RoleWe are seeking a highly skilled Electrical Maintenance Technician to join our team at Magna. As an Electrical Maintenance Technician, you will play a critical role in ensuring the smooth operation of our production equipment.Key ResponsibilitiesMaintain, design, develop, and continuously improve our equipment and technology to ensure optimal...

  • Production Equipment Engineer

    1 week ago

    St. Thomas, Ontario, Canada Magna Full time

    About the RoleWe are seeking a highly skilled Electrical Maintenance Technician to join our team at Magna. As an Electrical Maintenance Technician, you will play a critical role in ensuring the smooth operation of our production equipment.Key ResponsibilitiesMaintain, design, develop, and continuously improve our equipment and technology to ensure optimal...

  • CNC Machinist

    7 days ago

    St. Catharines, Ontario, Canada Niagara Precision Full time

    Job SummaryWe are seeking a skilled CNC Machinist to join our team at Niagara Precision. As a CNC Machinist, you will be responsible for operating and programming CNC machines, as well as manual machines when required.Key ResponsibilitiesFollow company health and safety policies, including the use of personal protective equipment (PPE).Review job travelers,...

  • CNC Machinist

    7 days ago

    St. Catharines, Ontario, Canada Niagara Precision Full time

    Job SummaryWe are seeking a skilled CNC Machinist to join our team at Niagara Precision. As a CNC Machinist, you will be responsible for operating and programming CNC machines, as well as manual machines when required.Key ResponsibilitiesFollow company health and safety policies, including the use of personal protective equipment (PPE).Review job travelers,...

  • Millwright - Industrial Equipment Specialist

    3 days ago

    St. Thomas, Ontario, Canada Magna Full time

    About the RoleMagna is seeking a skilled Millwright to join our team in a dynamic and fast-paced manufacturing environment. As a Millwright, you will play a critical role in ensuring the smooth operation of our equipment and machinery.Key ResponsibilitiesInstall, maintain, and repair complex mechanical systems and equipmentPerform routine maintenance tasks...

  • Millwright - Industrial Equipment Specialist

    3 days ago

    St. Thomas, Ontario, Canada Magna Full time

    About the RoleMagna is seeking a skilled Millwright to join our team in a dynamic and fast-paced manufacturing environment. As a Millwright, you will play a critical role in ensuring the smooth operation of our equipment and machinery.Key ResponsibilitiesInstall, maintain, and repair complex mechanical systems and equipmentPerform routine maintenance tasks...

  • Millwright - Industrial Equipment Specialist

    7 days ago

    St. Thomas, Ontario, Canada Magna Full time

    About the RoleMagna is seeking a skilled Millwright to join our team in a manufacturing environment. As a Millwright, you will be responsible for installing, maintaining, and repairing complex mechanical systems and equipment.Key ResponsibilitiesInstall, maintain, and repair mechanical systems, including hydraulic, pneumatic, and electrical systemsPerform...

  • Millwright - Industrial Equipment Specialist

    1 week ago

    St. Thomas, Ontario, Canada Magna Full time

    About the RoleMagna is seeking a skilled Millwright to join our team in a manufacturing environment. As a Millwright, you will be responsible for installing, maintaining, and repairing complex mechanical systems and equipment.Key ResponsibilitiesInstall, maintain, and repair mechanical systems, including hydraulic, pneumatic, and electrical systemsPerform...

  • Millwright - Industrial Equipment Specialist

    7 days ago

    St. Thomas, Ontario, Canada Magna International Inc. Full time

    About the RoleMagna International Inc. is seeking a skilled Millwright to join our team. As a Millwright, you will be responsible for installing, maintaining, and repairing complex mechanical systems and equipment in our manufacturing facility.Key ResponsibilitiesInstall, maintain, and repair mechanical systems, including hydraulics, pneumatics, and...

  • Millwright - Industrial Equipment Specialist

    7 days ago

    St. Thomas, Ontario, Canada Magna International Inc. Full time

    About the RoleMagna International Inc. is seeking a skilled Millwright to join our team. As a Millwright, you will be responsible for installing, maintaining, and repairing complex mechanical systems and equipment in our manufacturing facility.Key ResponsibilitiesInstall, maintain, and repair mechanical systems, including hydraulics, pneumatics, and...

  • Millwright - Industrial Equipment Specialist

    7 days ago

    St. Thomas, Ontario, Canada Magna International Inc. Full time

    About the RoleMagna International Inc. is seeking a skilled Millwright to join our team. As a Millwright, you will be responsible for installing, maintaining, and repairing complex mechanical systems and equipment in our manufacturing facility.Key ResponsibilitiesInstall, maintain, and repair mechanical systems, including hydraulics, pneumatics, and...

  • Manufacturing Process Engineer

    3 days ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job Summary:The Manufacturing Process Engineer is responsible for overseeing the production floor processes and equipment at Masco Canada Limited. This includes managing new equipment launches and modifications, ensuring that equipment is designed and built to meet safety standards, labor utilization, and cost-effectiveness.Key Responsibilities:Develop and...

  • Manufacturing Process Engineer

    3 days ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job Summary:The Manufacturing Process Engineer is responsible for overseeing the production floor processes and equipment at Masco Canada Limited. This includes managing new equipment launches and modifications, ensuring that equipment is designed and built to meet safety standards, labor utilization, and cost-effectiveness.Key Responsibilities:Develop and...

  • Manufacturing Process Engineer

    6 days ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job Summary:The Manufacturing Process Engineer is responsible for overseeing the production floor processes and equipment at Masco Canada Limited. This includes managing new equipment launches and modifications, ensuring that equipment is designed and built to meet safety standards, labor utilization, and cost-effectiveness.Key Responsibilities:Develop and...

  • Manufacturing Process Engineer

    6 days ago

    St. Thomas, Ontario, Canada Masco Canada Limited Full time

    Job Summary:The Manufacturing Process Engineer is responsible for overseeing the production floor processes and equipment at Masco Canada Limited. This includes managing new equipment launches and modifications, ensuring that equipment is designed and built to meet safety standards, labor utilization, and cost-effectiveness.Key Responsibilities:Develop and...

  • Junk Removal Experts: Cleaning Out Your Space

    4 days ago

    St. Thomas, Ontario, Canada James] Full time

    About James Junk RemovalWe are a reputable and eco-friendly junk removal company dedicated to providing top-notch services to our clients. Our team of experts is committed to delivering efficient and reliable solutions for all your junk removal needs.Our ServicesResidential Junk Removal: We offer comprehensive junk removal services for homes, including...

  • Junk Removal Experts: Cleaning Out Your Space

    5 days ago

    St. Thomas, Ontario, Canada James] Full time

    About James Junk RemovalWe are a reputable and eco-friendly junk removal company dedicated to providing top-notch services to our clients. Our team of experts is committed to delivering efficient and reliable solutions for all your junk removal needs.Our ServicesResidential Junk Removal: We offer comprehensive junk removal services for homes, including...

  • Industrial Electrical Technician

    4 weeks ago

    St. Thomas, Ontario, Canada Magna Full time

    Job Number: 5350 Group: Cosma International Division: Formet Industries Job Type: Permanent/Regular Location: ST. THOMAS Group Overview Cosma delivers a wide array of body, chassis, and engineering solutions to clients worldwide. Our strong product engineering, exceptional tooling capabilities, and diverse process expertise enable us to introduce...