Machinist

3 days ago

Edmonton, Canada Stream-Flo Industries Ltd. Full time

Internal Candidates - please apply by logging in to UltiPro.

External Candidates - please apply with the Apply Now button.

The conventional Machinist will set up and operate all conventional machines in accordance with work order requirements.

This position may qualify for relocation assistance to the right candidate. 

Key position functions include:

Ensure processes and machine operations are performed in accordance with safety regulations and are carried out in a conscientious manner. Operate machines by setting up and adjusting three and four-jaw chucks (where applicable), tools, attachments, collets, bushings, gears, stops and indicating devices.  Calculate requirements, using basic math, geometry, and trigonometry for practical problems such as computing dimensions, laying out work, and setting up machine tools Maintain specifications by monitoring the drilling, grooving, cutting, turning, facing, knurling, and thread chasing operations; taking measurements; adjusting controls; sharpening and replacing worn tools.  Maintain machines, equipment and workstations to an acceptable Stream-Flo standard of cleanliness.  Maintain equipment by preforming preventative maintenance requirements; following manufacturer's instructions; detecting and troubleshooting malfunctions.  Maintain an acceptable level of productivity and efficiency.  Work in conjunction with Industrial Engineering to achieve and maintain best practices, including the maintenance of tooling and fixture inventory.  Responsible to ensure product quality meets drawing specifications.  Stamp machinist's ID on all pieces, and re-stamp and/or mark heat numbers on pieces when heat numbers have been removed by machining.  Identify machining non-conformances by separation and/or marking.  Follow work order and process traveller requirements and fill out job sheets or record time using ERP system.  Report all machine, crane, and hoist problems in the proper maintenance logs and notify Maintenance Department and/or lead hand/supervisor of a down time situation.  Ensure compliance with Stream-Flo Group Principles in terms of Health, Safety, Quality, and Environmental regulations or policies.  Ensure compliance with all applicable standards/procedures.  Other duties assigned by lead hand/supervisor. 

Preferred candidates will possess a combination of the following qualifications:

Alberta Journeyman Machinist certification or equivalent with the Interprovincial Red Seal. Minimum 10 years relevant machining experience. Attention to detail. Mechanically inclined. Self-motivated, able to prioritize and possess strong organizational skills. Ability to multitask and work in a fast-paced environment.  Work with minimum supervision.  Training frequency: on-going/as needed.  Minimum education requirement: trade certificate as noted above. 

The Stream-Flo Group of Companies, consisting of Stream-Flo Industries Ltd. and Master Flo Valve Inc., are privately owned and operated Canadian manufacturers of wellhead, production gate valve and check valve equipment, as well as chokes, specialty control valves and supporting actuation. Since our inception in 1962, we have become a recognized leader for our superior technology, innovative designs and top quality products. Through continued product line development, the Stream-Flo Group has grown to be one of the largest manufacturers of our kind, offering our solutions to oil and gas regions throughout the world.

Stream-Flo offers a competitive salary, profit sharing and a comprehensive benefit program to prospective employees, as well as the opportunity to work in an entrepreneurial environment, characterized by continued growth and strong business results.

We thank all applicants for their interest. However only those candidates identified for further consideration will be contacted.

#LI-MK1

  • Machinist

    6 months ago

    Edmonton, Canada Pro-Western Plastics Ltd Full time

    **Reports to** Tool Room Supervisor **Summary** We are looking for a Machinist that will work in cooperation with the Tool Room Supervisor and the Engineer to repair and manufacture parts for molds to maintain the integrity and longevity of the molds. This position will include, but is not limited to, operating machining equipment, as well as sanding,...

  • Machinist

    6 months ago

    Edmonton, Canada Schlumberger Full time

    **MACHINIST**: **Job Summary** **Responsibilities**: - Work in a fast-paced team environment. - Pre-use inspection on equipment before starting the job. - Read and interpret drawings per the job. - Select proper tooling for the job. - Follow appropriate work instructions per the job. - Follow the QHSE policy and procedures. - Communicate process and safety...

  • CNC Machinist

    5 months ago

    Edmonton, Canada UNIVERSE MACHINE CORPORATION Full time

    **Position Name**: CNC Machinist **Job Type**: Full Time - 40 Hours per week **Rate**: Competitive - Based on Experience **Shift**: 7:30 AM - 4:00 PM **Qualifications**: - Understanding of standard practices, materials, tools and methods of the Machinist’s trade with an ability to use all types of measuring tools and maintain calibrations. - Ability...

  • Machinist

    6 months ago

    Edmonton, Canada Caproco(1987)Limited Full time

    **Caproco (1987) Limited** provides design, manufacturing, operation and training services related to Internal Corrosion Monitoring and control. **Duties**: - Set up and operate Manual Lathes and Milling Machines to fabricate parts according to specifications - Read and interpret blueprints, schematics, and engineering drawings - Use hand tools and...

  • Machinist

    5 months ago

    Edmonton, Canada Akrivis Machine Inc. Full time

    **Responsibilities** Set up and operation of CNC lathes and/or mills with a variety of controls both conversational and with G-Code. Inspection, measurement and documentation of manufacturing dimensions and processes. **Competencies**: - Working knowledge of ISO G-Code. - Working knowledge of various grades and heat treatments of metals, identification,...

  • CNC Machinist

    3 months ago

    Edmonton, Canada Q-Block Computing Full time

    Salary range: $26-$44/hr Job type: Full time/Part time Location: On-site (Edmonton, AB & Wetaskiwin, AB) Job Description: Q-Block Computing is seeking a CNC Machinist to join our innovative team in Canada. This role offers an exciting opportunity to contribute to the development of cutting-edge quantum technologies in...

  • Machinist Specialist

    4 weeks ago

    Edmonton, Alberta, Canada Stream-Flo Industries Ltd. Full time

    Job Title: Machinist SpecialistJob Summary: We are seeking a skilled Machinist Specialist to join our team at Stream-Flo Industries Ltd. The successful candidate will be responsible for computing dimensions and tolerances of machine parts, measuring and laying out work pieces, and repairing machine tools and parts.Key Responsibilities:Compute dimensions and...

  • Machinist Specialist

    4 weeks ago

    Edmonton, Alberta, Canada Red Seal truck and Equipment Repair Full time

    Job Title: MachinistJob Summary: Red Seal truck and Equipment Repair is seeking a skilled Machinist to join our team. As a Machinist, you will be responsible for repairing and maintaining machine tools and parts, setting up and adjusting production machineries/tools, and fitting and assembling components and machine parts to close...

  • Machinist Specialist

    2 weeks ago

    Edmonton, Alberta, Canada Stream-Flo Industries Ltd. Full time

    About the Role:Stream-Flo Industries Ltd. is seeking a skilled Machinist Specialist to join our team. As a key member of our production team, you will be responsible for setting up and operating machine tools to precision machine parts.Key Responsibilities:Compute dimensions and tolerances of machine partsMeasure and lay out work pieces in preparation for...

  • Manual Machinist

    3 months ago

    Edmonton, Canada Rite-Way Machining Inc Full time

    Looking for a 2nd or 3rd year Manual machinist to operate a manual lathe to machine flanges, fittings and valves. (Must have experience) We are a small family operated business in the oil and gas industry located in south east Edmonton. Other duties will consist of operating drill presses, shipping/receiving, driving forklift, and general shop duties. No...

  • Machinist Technician

    4 weeks ago

    Edmonton, Alberta, Canada Goralta Oilfield Supply Ltd Full time

    We are seeking a skilled Machinist Technician to join our team at Goralta Oilfield Supply Ltd. The ideal candidate will possess a Registered Apprenticeship certificate and have experience working with engine machinists or equivalent experience.Key Responsibilities:Work in a fast-paced environment with attention to detailOperate engine lathes and other...

  • Machinist

    2 months ago

    Edmonton, Canada Riteway Machining Full time

    General tasks include boring, tapering, facing, threading flanges and fittings to desired schedules. Hours are 8:30 AM to 5-5:30 with a 1 hour lunch Monday to Friday Additional pay: - Bonus pay - Overtime pay **Benefits**: - Paid time off Schedule: - 8 hour shift - Monday to Friday **Experience**: - machinist: 1 year...

  • General Machinist

    2 months ago

    Edmonton, Canada Goralta Oilfield Supply Ltd Full time

    Education: - Expérience: **Education**: - Registered Apprenticeship certificate - Engine machinist - or equivalent experience **Work setting**: - Oil and gas industry **Certificates, licences, memberships, and courses**: - Machinist Trade Certification **Measuring tools**: - Callipers - Verniers **Equipment and machinery experience**: - Engine...

  • Machinist

    2 months ago

    Edmonton, Canada Stream-Flo Industries Ltd. Full time

    Reporting to the CNC Supervisor, the Machinist will set up and operate all conventional machines in accordance with work order requirements. **Key position functions include**: - Ensure processes and machine operations are performed in accordance with safety regulations and are carried out in a conscientious manner. - Operate machines by setting up and...

  • Machinist

    2 months ago

    Edmonton, Canada Riteway Machining Full time

    General tasks include boring, tapering, facing, threading flanges and fittings to desired schedules. Hours are 8:30 AM to 5-5:30 with a 1 hour lunch Monday to Friday Pay: $22.00-$35.00 per hour Additional pay: - Bonus pay - Overtime pay **Benefits**: - Paid time off Schedule: - 8 hour shift - Monday to Friday **Experience**: - machinist: 1 year...

  • Machinist Lead

    6 months ago

    Edmonton, Canada CNC Industries Full time

    CNC Industries is a prominent manufacturer of OEM components for the Mining, Construction, Earthmoving Industries, and specialized parts used in the Oil Extraction process. CNC Industries is looking for a **Machinist Lead** with experience using either CNC Lathe machines, Weiler, Mazak Turn/Mill Machines or DMG Mori Multi Spindle Machines. **Start Date**:...

  • Machinist Supervisor

    1 month ago

    Edmonton, Alberta, Canada Drake International Full time

    Job Summary:Drake International is seeking a highly skilled and experienced Machinist Supervisor to join our client's dynamic team. As a key member of the production team, you will be responsible for ensuring the efficient operation of machining equipment and supervising a team of machinists.Key Responsibilities:Supervise and train a team of machinists to...

  • Machinist Specialist

    4 weeks ago

    Edmonton, Alberta, Canada Goralta Oilfield Supply Ltd Full time

    We are seeking a skilled Machinist Specialist to join our team at Goralta Oilfield Supply Ltd. The ideal candidate will have a strong background in precision machining and experience working with engine lathes.Key Responsibilities:Operate engine lathes to precision machine partsWork independently in a fast-paced environmentAbility to lift up to 23 kg (50...

  • Machinist

    6 months ago

    Edmonton, Canada DIMENSION MACHINE INC. Full time

    Work Term: Permanent - Work Language: English - Hours: 40 to 50 hours per week - Education: Registered Apprenticeship certificate - Experience: 5 years or more - or equivalent experience **Work setting**: - General manufacturing **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Repair machine tools and parts - Set up and...

  • Manual Machinist

    6 months ago

    Edmonton, Canada Pro-Western Plastics Ltd Full time

    **Reports to** Tool Room Supervisor **Summary** We are looking for a Machinist that will work in cooperation with the Tool Room Supervisor and the Engineer to repair and manufacture parts for molds to maintain the integrity and longevity of the molds. This position will include, but is not limited to, operating machining equipment, as well as sanding,...