Machine Tool Mechanic
Found in: Talent CA C2 - 2 weeks ago
This Machine Tool Mechanic Position Features:
- $55 - $60/hr
Duties & Responsibilities: General duties and responsibilities include but are not limited to:
• Repair, install and troubleshoot large CNC Horizontal and Vertical Boring Mill’s
• Repair, renew and/or replace worn out bearings, shafts, gears, and re-assemble and check functionally test of machine tools
• Preform laser calibration of CNC Machine Tool Axis and precision levelling
• Examine parts for defects, breakage or excessive wear. Re-engineer and/or upgrade defected arears on the machine as required
• Study blueprints and manufacturer manuals to determine correct installation procedure and operation of machine.
• Mechanical troubleshooting as required
• Perform inspection and tests on machine tools (alignment test, ball test, squareness; using electronic level and laser)
• Work with original machine tool manufacturer to upgrade or troubleshoot problems or functionality
• Follow established safety practices and regulation.
Knowledge, Skills & Abilities:
• Millwright 433A & Electrician 442A or 309A.
• Good mechanical aptitude and work ethic
• Willing to work overtime and be on call for after hour work
• Experience with machine tools or other related equipment
• Knowledge of Fanuc and Siemens controls a definite asset
• Strong knowledge of hydraulics, pneumatic, electrical and CNC controls
• Previous experience with large machine tools (PAMA, Toshiba, Berthiez, Shiesse)
• Knowledge of electrical schematics / electronics an asset
• Strong machining skills
• Ability to work within tight deadlines and under pressure
• Ability to read blueprint of electric and hydraulic schematics to diagnose/troubleshoot problems
• Strong organizational and communicational skills in both oral and written form
Qualifications:
• Millwright 433A & Electrician 442A or 309A.
• Minimum 5 years experience in a machine shop environment
• Must have a valid drivers' license
• Completion of secondary school
-
CNC machining tool operator
Found in: Talent CA 2 C2 - 7 days ago
Toronto, Canada AST STONE LIMITED Full timeEducation: No degree, certificate or diplomaExperience: 3 years to less than 5 yearsWork settingManufactureTasksOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Perform routine maintenance on equipment and machineryEnter codes specifying...
-
CNC machining tool operator
Found in: Talent CA 2 C2 - 4 days ago
Toronto, Canada AST STONE LIMITED Full timeEducation: Expérience: EducationNo degree, certificate or diplomaWork settingManufactureTasksOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Perform routine maintenance on equipment and machineryEnter codes specifying speed, feed and...
-
machinist
Found in: Talent CA 2 C2 - 2 days ago
Toronto, Canada ADA Precision Machine & Tool Co. Ltd. Full timeEducation: No degree, certificate or diplomaExperience: 5 years or moreTasksRead and interpret engineering drawings, blueprints, charts and tablesRepair machine tools and partsSet up and adjust production machineries/toolsFit and assemble components and machine parts to close toleranceMaintain, repair and calibrate precision measuring instrumentsDocument and...
-
machinist
Found in: Talent CA 2 C2 - 2 weeks ago
Toronto, Canada ADA Precision Machine & Tool Co. Ltd. Full timeEducation: No degree, certificate or diplomaExperience: 5 years or moreTasksRead and interpret engineering drawings, blueprints, charts and tablesRepair machine tools and partsSet up and adjust production machineries/toolsFit and assemble components and machine parts to close toleranceMaintain, repair and calibrate precision measuring instrumentsDocument and...
-
machinist
Found in: Talent CA 2 C2 - 4 days ago
Toronto, Canada ADA Precision Machine & Tool Co. Ltd. Full timeEducation: Expérience: EducationNo degree, certificate or diplomaTasksRead and interpret engineering drawings, blueprints, charts and tablesRepair machine tools and partsSet up and adjust production machineries/toolsFit and assemble components and machine parts to close toleranceMaintain, repair and calibrate precision measuring instrumentsDocument and...
-
Maintenance Mechanic
Found in: Talent CA C2 - 2 weeks ago
Toronto, Canada Canadian Linen Full timeMaintenance Mechanic - Monday to Friday, 8hrs shifts. Career opportunity Canadian Linen and Uniform Services Company is looking for a Maintenance Mechanic to join our team as a Full-Time employee. Job Description: Ensure operation of machinery and mechanical equipment by completing routine preventive and corrective maintenance requirements including...
-
Machine Operator
4 days ago
Greater Toronto Area, Canada CES Blown film Blow mould experience - Sourcing Skilled Candidates Full time**Machine Operator Responsibilities**: - Assist in the installation, maintenance, and repair of machinery. - Operate tools in order to aid in the manufacturing process. - Perform periodic checks on equipment and solve problems as detected. - Work with others in order to ensure that equipment is in proper working order. - Observe and follow company safety...
-
mechanical technologist
Found in: Talent CA 2 C2 - 1 week ago
Toronto, Canada ABISH TECH INC. Full timeEducation: College/CEGEPExperience: 2 years to less than 3 yearsWork settingManufactureTasksAssist in inspection of mechanical installations and construction projectsAssist in preparing design, drawings and specificationsAssist in the design of moulds, tools, dies, jigs and fixturesCarry out a limited range of mechanical tests and analyses of machines,...
-
mechanical technologist
Found in: Talent CA 2 C2 - 1 week ago
Toronto, Canada ABISH TECH INC. Full timeEducation: Expérience: EducationCollege/CEGEPWork settingManufactureTasksAssist in inspection of mechanical installations and construction projectsAssist in preparing design, drawings and specificationsAssist in the design of moulds, tools, dies, jigs and fixturesCarry out a limited range of mechanical tests and analyses of machines, components and...
-
electrical mechanic
Found in: Talent CA 2 C2 - 1 week ago
Toronto, Canada SHARE WAY AUTO SERVICE INC Full timeEducation: Expérience: EducationOther trades certificate or diploma or equivalent experienceWork settingMaintenanceRepairTestingServiceTasksTest and observe electrical and mechanical conditions of equipmentTroubleshoot and repair electric motors, transformers, switchgear, generators and other electro-mechanical equipmentUse machining tools to fabricate or...
-
electrical mechanic
Found in: Talent CA 2 C2 - 1 week ago
Toronto, Canada SHARE WAY AUTO SERVICE INC Full timeEducation: Other trades certificate or diplomaExperience: 3 years to less than 5 years or equivalent experienceWork settingMaintenanceRepairTestingServiceTasksTest and observe electrical and mechanical conditions of equipmentTroubleshoot and repair electric motors, transformers, switchgear, generators and other electro-mechanical equipmentUse machining tools...
-
Tool Room
2 days ago
Toronto, Canada Polytainers, Inc. Full time**Job Title**: Mold Technician **Department**: Molding **Supervisor**: Tool Room Manager **Shift**: Shift 3 (11:30pm to 7:30am) ***: Reporting to the Tool Room Manager, the Mold Technician is responsible for performing product changes, attending to mold issues during production, preparing molds for upcoming mold changes, performing work as defined by the...
-
Field Service Technician
Found in: Talent CA C2 - 2 weeks ago
Toronto, Canada Next Level Group Full timePrimary responsibilities will include:Provide on-site installation, repairs, and maintenance of CNC Machine Tool product line.Through preventative and corrective maintenance, ensure customer equipment performs at an optimal level of quality and efficiency.Diagnose and troubleshoot defects in CNC Machine Tools.Perform mechanical and electrical repairs on...
-
CNC machining tool operator
Found in: Talent CA 2 C2 - 2 weeks ago
Toronto, Canada CB Marble Craft Limited Full timeEducation: Secondary (high) school graduation certificateExperience: 2 years to less than 3 yearsWork site environmentNoisyTasksRead and interpret blueprintsOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Prepare etching solution and...
-
CNC machining tool operator
Found in: Talent CA 2 C2 - 2 weeks ago
Toronto, Canada CB Marble Craft Limited Full timeEducation: Expérience: EducationSecondary (high) school graduation certificateWork site environmentNoisyTasksRead and interpret blueprintsOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Prepare etching solution and immerse metal parts...
-
mechanical engineering technologist
Found in: Talent CA 2 C2 - 1 week ago
Toronto, Canada JIT Automation Inc Full timeWork Term: PermanentWork Language: EnglishHours: 30 to 40 hours per weekEducation: College, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 yearsExperience: 2 years to less than 3 yearsWork site environmentConfined spacesNoisyHotTasksAssist in inspection of mechanical installations and construction projectsAssist in...
-
electrical mechanic
Found in: Talent CA 2 C2 - 1 week ago
Toronto, Canada 2000007 Ontario Inc. Full timeEducation: Secondary (high) school graduation certificateExperience: 3 years to less than 5 years or equivalent experienceWork settingMaintenanceRepairTestingServiceTasksTest and observe electrical and mechanical conditions of equipmentTroubleshoot and repair electric motors, transformers, switchgear, generators and other electro-mechanical equipmentUse...
-
Industrial Millwright
Found in: Talent CA C2 - 1 week ago
Toronto, Canada Elite Personnel Full timeIndustrial Millwright / Mechanic3rd shift – Night from 10:00 pm to 6:30 a.m. Responsibilities:Troubleshooting, fixing mechanical problemsSet up of equipment in an efficient mannerPerforming major and minor adjustments to equipment in a reasonable timeframePerforming all maintenance on plant equipment in a safe manner, ensure equipment and machines are...
-
Mechanic
Found in: Talent CA C2 - 1 week ago
Toronto, Canada Hertz Full timeWage: Starting at $30.00 per hour dependent on experience.Job Description: The Auto Mechanic performs vehicle repairs without oversight. Additional responsibilities include preventive maintenance and completing appropriate paperwork and reports. Ability to repair vehicles independently, while also having experience working well in a team environment. Must...
-
Tool Crib Attendant
Found in: Talent CA C2 - 6 days ago
Toronto, Canada AppleOne Full timeThis Tool Crib Attendant Position Features: • Great Pay from $64K to $73K - Steady days We are seeking an experienced and detail-oriented Tool Crib Attendant to join our machine shop team. As a Tool Crib Attendant, you will be responsible for managing the inventory of tools and equipment used in our machines, ensuring that they are properly stored,...