Press Operator

5 months ago

Brampton, Canada ALMAG Full time

Functionally reports to Extrusion Team Lead. Responsible for optimally operating the press, process equipment, handling equipment and die setup in a safe and efficient manner. Responsible for following Company policies and procedures by ensuring a safe working environment is maintained at all times. We believe that every Employee is responsible to act safely and to model good safety practices.

DUTIES AND RESPONSIBILITIES

The duties and responsibilities of the Press Operator are detailed below, but not limited to the following:

Efficiently operate the extrusion press while maintaining good quality that meets Almag’s quality standards. Keep track of equipment performance and ensure press is well tuned, and temperatures are being properly managed from billet oven to press exit temperatures. Responsible for monitoring runout efficiency such as length, speed, and finish. Reference work orders to ensure press is running at the optimal speeds to maximize productivity. Ensure billet zone temperatures are setup, monitored and maintained throughout the runs. Mark extrusions accordingly if temperatures do not meet requirements. Die management - Ensure all necessary tooling is available at the beginning and throughout shift. Load dies into press and ensure presses are not waiting for die changes. Importance must be given to ensure dies are not loaded too early or too late. Ensure die temperatures are maintained when dies are loaded and removed from the ovens. Responsible for communicating directly with the team leads/maintenance team if any mechanical breakdowns or issues are encountered. Ensure proper billets/logs are in the ovens and monitor the supply to keep press going. Ensure average speeds are followed based on information contained on work orders. If deviations occur, ensure note is made in EPICS and Team Lead is notified. Responsible for EPICS entries for billet lengths, cut offs, cut sizes, etc., and highlight any special notes and instructions that the team needs to focus on. Responsible for entering all downtime, die fails, quality issues, and schedule adherence notes in EPICS. Responsible for checking notes in EPICS and viewing drawings throughout the shift to ensure work orders are followed correctly. Responsible for checking the run out on the second billet produced. Report to Team Lead if billet length scheduled is inappropriate and have it changed to improve yield. Ensure sufficient spacing is kept between extrusion pieces on the cooling table to make sure proper cooling is maintained. Responsible for ensuring the extrusion is correctly fed into puller jaws. Notify maintenance/team lead if any issues occur. Ensure exit/runout temperatures are monitored and maintained throughout the run. Maintain quality checks at front end of press during operation and continuously throughout the shift. Press samples must be properly labelled and kept together for traceability. Ensure samples are taken after the first billet and verify dimensions and surface finish according to drawings in EPICS. Ensure all billets and alloys used are accounted for in EPICS and documented accurately. Check finish and dimensions on extrusions at the required frequency. Complete press Ascona scans as required. Must have knowledge and ability to operate all equipment at saw and stretcher. Other duties as assigned.

Requirements

MINIMUM QUALIFICATIONS

Education/Experience

High school Diploma with some technical background and mechanical aptitude. Extrusion experience is an asset.

Technical Skills/Competence

1-2 years’ experience in an industrial environment. Knowledge of machinery and ability to read drawings is an asset. Willing to train. Must be willing and able to train and develop as a saw operator / inspector, stretcher operator and die preparation operator as understating these jobs and their impact is critical to developing as a competent press operator. Basic computer skills including MS Windows is required. Other MS software is an asset. Understanding of measurements, tolerances, basic geometry, and numeracy comprehension. Ability to lift up-to 50lbs independently, and ability to lift up-to 100lbs in collaboration with a team member. Familiarity with extrusion software such as EPICS is an asset.

Benefits

We offer a full and competitive benefits package including:

Profit sharing Health care spending account Education assistance program Health and dental Life AD&D Long-term disability Critical illness insurance Gym memberships Wellness programs Monthly social committee activities

  • Press Operator

    5 months ago

    Brampton, Canada Can Art Aluminum Extrusion Full time

    Can Art Aluminum Extrusion is a privately held North American based extruder of standard and custom aluminum profiles. Can Art has grown from a single press operation in 1988 to the multi plant, multi press operation that we are today._ - We have built a reputation for uncompromised quality, responsive service, and a commitment to growth in the markets we...

  • Press Operator

    5 months ago

    Brampton, Canada Almag Aluminum Full time

    Functionally reports to Extrusion Team Lead. Responsible for optimally operating the press, process equipment, handling equipment and die setup in a safe and efficient manner. Responsible for following Company policies and procedures by ensuring a safe working environment is maintained at all times. We believe that every Employee is responsible to act safely...

  • Press Operator

    5 months ago

    Brampton, Canada Alliance Group & Staffing Full time

    We are seeking for Press operator for one of our client in Brampton. **Duties**: - Run press to produce quality stamped parts using safe work practices. - Frequently check and ensure the quality of stamped products from press. Sort or rework as required. - Complete associated paperwork/documentation. - Handle materials at end of press, assuring that...

  • Press Operator

    5 months ago

    Brampton, Canada Alliance Group & Staffing Full time

    We are seeking for **Press operator** for one of our client in **Brampton,ON.** **Job responsibilities** - Frequently check and ensure the quality of stamped products from press. Sort or rework as required. - Complete associated paperwork/documentation. - Handle materials at end of press, assuring that customer specified standard packs and bins are used. -...

  • Press Operator

    2 months ago

    Brampton, Canada Almag Aluminum Full time

    Functionally reports to Extrusion Team Lead. Responsible for optimally operating the press, process equipment, handling equipment and die setup in a safe and efficient manner. Responsible for following Company policies and procedures by ensuring a safe working environment is maintained at all times. We believe that every Employee is responsible to act safely...

  • Press Operator

    5 months ago

    Brampton, Canada Almag Aluminum Full time

    Functionally report to Extrus - Team Lead. Re - nsible for - imally operating the press, - ocess equipment, han - ng equipment an - ie setup in a - e and efficient manne - Responsible for follo - g Company pol - es and proc ures by ensuring a safe rking environment is maintained at all times. We believe that every Employee is responsible to act safely...

  • Press Operator

    1 month ago

    Brampton, Ontario, Canada ALMAG Full time

    Job Title: Press OperatorAt Almag, we are seeking a highly skilled and experienced Press Operator to join our team. As a Press Operator, you will be responsible for operating the extrusion press in a safe and efficient manner, ensuring high-quality products that meet our quality standards.Key Responsibilities:Operate the extrusion press to produce...

  • Press Operator

    1 month ago

    Brampton, Ontario, Canada ALMAG Full time

    Job Title: Press OperatorAt Almag, we are seeking a highly skilled and experienced Press Operator to join our team. As a Press Operator, you will be responsible for operating the extrusion press in a safe and efficient manner, ensuring high-quality products that meet our quality standards.Key Responsibilities:Operate the extrusion press to produce...

  • Assistant Press Operator

    5 months ago

    Brampton, Canada Peel Plastic Products Limited Full time

    Overview: We are seeking skilled Assistant Press Operators to join our team. As an Assistant Press Operator, you will be responsible for assisting the Press Operator with flexographic printing press set-up, maintaining ink pots and ink viscosity during the press run and maintaining cleanliness of equipment and area. The essential duties of his job are listed...

  • Assistant Press Operator

    5 months ago

    Brampton, Canada Fortune Recruits Full time

    The Assistant Press Operator is a vital printing team member, responsible for supporting the Press Operator in operating and maintaining printing presses. You help with setting up the press for printing, loading, and unloading paper, adjusting press settings, troubleshooting any issues that may arise, and conducting quality control checks. Additionally, they...

  • Press Operator

    5 months ago

    Brampton, Canada Can Art Aluminum Extrusion Full time

    _Can Art is a commercial leader in the Aluminum Extrusion field, with 3 plants in Ontario, come and join a true industry leader in this exciting manufacturing field._ We need full time full time Press Operators to start immediately at our Brampton Plant, near Steeles and Finch across the road from Wet N Wild Toronto. **Schedule**: 12 hour shifts,...

  • Assistant Press Operator

    5 months ago

    Brampton, Canada Can Art Aluminum Extrusion Full time

    Can Art Aluminum Extrusion is a privately held North American based extruder of standard and custom aluminum profiles. Can Art has grown from a single press operation in 1988 to the multi plant, multi press operation that we are today._ - We have built a reputation for uncompromised quality, responsive service, and a commitment to growth in the markets we...

  • Press Operator Trainee

    5 months ago

    Brampton, Canada Data Communications Management - DCM Full time

    **Position**: Press Operator Trainee **Type**: Full time, permanent **Location**: Brampton, ON We are looking for a dedicated individual with a keen eye for detail and a strong mechanical inclination to join our team as a Press Operator Trainee. The Press Operator Trainee will learn to set up and operate a rotary flexographic press, ensuring high-quality...

  • Press Brake Operator

    5 months ago

    Brampton, Canada SS manufacturing Full time

    Overview We are seeking a skilled Press Brake Operator to join our team. As a Press Brake Operator, you will be responsible for setting up and operating press brake machines to bend, form, and shape metal sheets according to specifications. This is a great opportunity for someone with experience in machining and mechanical knowledge to showcase their skills...

  • Printing Press Operator

    5 months ago

    Brampton, Canada A&A DIGITAL SIGN & PRINTING LTD. Full time

    Education: Secondary (high) school graduation certificate - Experience: 1 to less than 7 months **Tasks**: - Mount plates or cylinders and make necessary adjustments - Fill ink fountains and control colour and viscosity - Estimate costs - Set up press and operate at slow speed to check samples - Monitor regular press run for quality using computer control...

  • Printing Press Operator

    5 months ago

    Brampton, Canada A&A DIGITAL SIGN & PRINTING LTD. Full time

    Education: Secondary (high) school graduation certificate - Experience: 1 to less than 7 months **Tasks**: - Mount plates or cylinders and make necessary adjustments - Fill ink fountains and control colour and viscosity - Estimate costs - Set up press and operate at slow speed to check samples - Monitor regular press run for quality using computer control...

  • Press Brake Operator

    5 months ago

    Brampton, Canada On-Time Human Resources Full time

    **Job Title**: Press Brake Operator **Location**: Mississauga **Shift**: Morning & Afternoon **Major Intersection**: Millcreek Dr and Erin Mills Pkwy **Working Days**: Monday to Friday **Shift Timings**: 07:00 AM - 03:30 PM and 03:30 PM - 11:00 PM **Pay Rate**: $ 21 - 26/hr **Responsibilities**: - Operate press brake machine. - Bend and form the...

  • Brake Press Operator

    5 months ago

    Brampton, Canada Acara Solutions Full time

    **Brake Press Operator** **Location**:Brampton, ON** **Flexible shift** **Length: Direct Placement** Required Skills / Qualifications: - High school Diploma or GED. - **Minimum 1 year experience in Brake Press Operator**: - Experience operating overhead crane equipment preferred. **Job Type**: Permanent **Salary**: $28.00 per hour Expected hours: 40...

  • Printing Press Operator

    18 hours ago

    Brampton, Canada Panjab Printings Inc. Full time

    Education: - Expérience: - **Education**: - Secondary (high) school graduation certificate - ** Tasks**: - Advise press crew on product specifications or material requirements - Mount plates or cylinders and make necessary adjustments - Review job orders to determine production time, colour sequence and quantities required - Fill ink fountains and...

  • Press Operations Specialist

    2 weeks ago

    Brampton, Ontario, Canada AppleOne Full time

    Job Summary:We are seeking a skilled Press Operations Specialist to join our team at AppleOne. As a key member of our production team, you will be responsible for supporting the press operator and ensuring the smooth operation of our manufacturing processes.Key Responsibilities:Support the Press Operator: Provide assistance to the press operator in setting...