Analog Design Engineer

3 weeks ago

Kanata, Canada HCLTech Full time

Role: Analog Design Engineer

Location: Kanata, ON

Responsibilities:

As a member of the Analog Layout team you will be responsible to deliver fully-verified, clean layout, this includes the following:

  • Designing complex layout for mixed signal, and analog circuits in deep sub-micron CMOS technologies.
  • Reviewing and analyzing floorplans and complex circuits with circuit designers.
  • Running complete set of design verification tools available on AMS blocks.
  • Working with circuit design team to plan/schedule work and negotiate any necessary layout tradeoffs as needed.
  • Interpreting LVS, DRC and ERC reports to find the fastest way to complete layout.
  • Exceeding engineering specifications and expectations by working closely with the circuit design team.
  • Utilizing advanced CAD tools and mask design knowledge to deliver correct and robust layout that meet stringent matching performance, area and power requirements.


Key Qualifications

Typically requires more than 8 years of experience in analog/mixed-signal layout design of deep sub-micron CMOS circuits

Experience implementing analog layouts to achieve tight matching, low noise, and low power consumption. Layouts may include analog blocks, resistors, capacitors, pad IOs, ESD structures, etc.

High level of proficiency in custom and standard cell based floor-planning and hierarchical layout assembly.

Must understand techniques for managing IR drop, RC delay, electromigration, self heating and coupling capacitance.

Must recognize failure prone circuit and layout structures, have experience with analog and DFM best practices, and proactively work with circuit designer to identify the best approach to solving problems.

High level proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.

Knowledge of MENTOR GRAPHICS or CADENCE layout tools.

Scripting skills in PERL or SKILL are considered a plus, but not required.

Excellent communication skills and able to work with cross-functional teams.

  • Analog Design Engineer

    3 weeks ago

    Kanata, Canada HCLTech Full time

    Role: Analog Design Engineer Location: Kanata, ON Responsibilities: As a member of the Analog Layout team you will be responsible to deliver fully-verified, clean layout, this includes the following: Designing complex layout for mixed signal, and analog circuits in deep sub-micron CMOS technolo

  • Analog Design Engineer

    3 weeks ago

    Kanata, Canada HCLTech Full time

    Role: Analog Design EngineerLocation: Kanata, ONResponsibilities: As a member of the Analog Layout team you will be responsible to deliver fully-verified, clean layout, this includes the following: Designing complex layout for mixed signal, and analog circuits in deep sub-micron CMOS technologies. Reviewing and analyzing floorplans and complex circuits with...

  • Analog Design Engineer

    3 weeks ago

    Kanata, Canada HCLTech Full time

    Role: Analog Design EngineerLocation: Kanata, ONResponsibilities: As a member of the Analog Layout team you will be responsible to deliver fully-verified, clean layout, this includes the following: Designing complex layout for mixed signal, and analog circuits in deep sub-micron CMOS technologies. Reviewing and analyzing floorplans and complex circuits with...

  • Analog Design Engineer

    3 weeks ago

    Kanata, Canada HCLTech Full time

    Role: Analog Design EngineerLocation: Kanata, ONResponsibilities: As a member of the Analog Layout team you will be responsible to deliver fully-verified, clean layout, this includes the following: Designing complex layout for mixed signal, and analog circuits in deep sub-micron CMOS technologies. Reviewing and analyzing floorplans and complex circuits with...

  • Analog Design Engineer

    3 weeks ago

    Kanata, Ontario, Ottawa region, Canada HCLTech Full time

    Role: Analog Design EngineerLocation: Kanata, ONResponsibilities: As a member of the Analog Layout team you will be responsible to deliver fully-verified, clean layout, this includes the following: Designing complex layout for mixed signal, and analog circuits in deep sub-micron CMOS technologies. Reviewing and analyzing floorplans and complex circuits with...

  • Asic Design

    2 weeks ago

    Kanata, Canada Synopsys Full time

    51996BR - CANADA - Ontario - Kanata, CANADA - Ontario - Markham, CANADA - Ontario - Mississauga, CANADA - Ontario - Nepean, CANADA - Ontario - Toronto, CANADA - Ottawa **Job Description and Requirements** **Job Description and Requirements** Starting in 2024, this 8 to 12 **months internship position is for Masters students enrolled in...

  • Senior ASIC Design Verification Engineer

    4 months ago

    Kanata, Canada BTA Design Services Full time

    About Us:Headquartered in Ottawa, BTA Design serves the electronic design community in Canada and beyond, specializing in ASIC and FPGA design and verification, and embedded software development services. We augment and enhance our clients' teams and accelerate the development of complete designs.We're adaptable and efficient, with a brilliant staff at our...

  • Principal Hardware Designer

    4 months ago

    Kanata, Canada Sanmina Full time

    Job Description Advanced Microsystems Technologies, AMT, is a technology division of Sanmina Corporation (Nasdaq: SANM), responsible for RF, Microelectronic, Optical components and Integrated Subsystems, providing services from design concept, through prototype design and testing, process development, assembly and test innovation, to volume...

  • Mechanical Design Engineer

    2 months ago

    Kanata, Canada Sanmina Full time

    Job Description Advanced Microsystems Technologies, AMT, is a technology division of Sanmina Corporation (Nasdaq: SANM), responsible for RF, Microelectronic, Optical components and Integrated Subsystems, providing services from design concept, through prototype design and testing, process development, assembly and test innovation, to volume...

  • Design Verification Engineer

    1 week ago

    Kanata, Canada NXP Semiconductors Full time

    Design Verification Engineer (R-10055655)OverviewThe Ottawa Technology Center, member of NXP MCU/MPU Engineering (MME) group, is a world-class team responsible for hardware and software development of some of the coolest embedded processing and networking products going into homes and businesses around the world. DescriptionThe hardware team is looking to...

  • Design Verification Engineer

    1 week ago

    Kanata, Canada NXP Semiconductors Full time

    Design Verification Engineer (R-10055655)OverviewThe Ottawa Technology Center, member of NXP MCU/MPU Engineering (MME) group, is a world-class team responsible for hardware and software development of some of the coolest embedded processing and networking products going into homes and businesses around the world. DescriptionThe hardware team is looking to...

  • Design Verification Engineer

    1 week ago

    Kanata, Canada NXP Semiconductors Full time

    Design Verification Engineer (R-10055655) Overview The Ottawa Technology Center, member of NXP MCU/MPU Engineering (MME) group, is a world-class team responsible for hardware and software development of some of the coolest embedded processing and networking products going into homes and businesses around the world. Description The hardware team is looking...

  • Senior Microelectronic Design Engineer

    4 months ago

    Kanata, Canada Sanmina Full time

    Job Description Advanced Microsystems Technologies, AMT, is a technology division of Sanmina Corporation (Nasdaq: SANM), responsible for RF, Microelectronic, Optical components and Integrated Subsystems, providing services from design concept, through prototype design and testing, process development, assembly and test innovation, to volume...

  • Microelectronic Packaging Design Engineer

    4 months ago

    Kanata, Canada Sanmina Full time

    Job Description Advanced Microsystems Technologies, AMT, is a technology division of Sanmina Corporation (Nasdaq: SANM), responsible for RF, Microelectronic, Optical components and Integrated Subsystems, providing services from design concept, through prototype design and testing, process development, assembly and test innovation, to volume...

  • Design Verification Engineer

    1 week ago

    Kanata, Canada NXP Semiconductors Full time

    Design Verification Engineer (R-10055655) Overview The Ottawa Technology Center, member of NXP MCU/MPU Engineering (MME) group, is a world-class team responsible for hardware and software development of some of the coolest embedded processing and networking products going into homes and businesses

  • Design Verification Engineer

    2 weeks ago

    Kanata, Ontario, Ottawa region, Canada NXP Semiconductors Full time

    Design Verification Engineer (R-10055655)OverviewThe Ottawa Technology Center, member of NXP MCU/MPU Engineering (MME) group, is a world-class team responsible for hardware and software development of some of the coolest embedded processing and networking products going into homes and businesses around the world. DescriptionThe hardware team is looking to...

  • Electronics Technician

    4 months ago

    Kanata, Canada BRAEBON Medical Corporation Full time

    **BRAEBON Medical Corporation** is a leading developer of sleep diagnostic products. We require a talented, self-motivated individual to join our Production Team. This dynamic person will have responsibilities throughout the product lifecycle, including inspection, assembly, testing and troubleshooting of electronics and electro-mechanical assemblies, as...

  • Electronics Technician

    3 months ago

    Kanata, Canada BRAEBON Medical Corporation Full time

    **BRAEBON Medical Corporation** is a leading developer of sleep diagnostic products. We require a talented, self-motivated individual to join our Production Team. This dynamic person will have responsibilities throughout the product lifecycle, including inspection, assembly, testing and troubleshooting of electronics and electro-mechanical assemblies, as...

  • Asic Digital Design, Manager

    3 weeks ago

    Kanata, Canada Synopsys Full time

    Be part of a global diverse team that pushes boundaries on DDR PHY IP development and solution - Your passion and expertise will shape the next generation of product innovation, performance, and efficiency - In this role, you will contribute to all phases of designs of DDR PHY IP from design specification to productization, including certain level of...

  • Mechanical Design Manager

    3 months ago

    Kanata, Canada Syntronic Full time

    Are you ready to be part of a leading global engineering design house specializing in the design and development of embedded software/hardware, electronics, and electro-mechanics? **What we’re looking for** - Highly motivated and dynamic professionals - Motivated designers with broad backgrounds and service mindset to be a consultant - Professionals with...