![General Motors Canada](https://media.trabajo.org/img/noimg.jpg)
Sub-system lead engineer
6 days ago
Job Description
This position is classified as a Hybrid position, meaning the successful candidate will work at our Markham office three (3) days per week.
The Role
A VMEC Sub-System Lead Engineer (SSLE) develops some of General Motor’s most advanced and exciting mobility features. This dynamic role supports innovative technology development applicable to aspects of autonomous, electric, and traditional internal combustion applications in the Steering domain.
The Sub-System Lead Engineer (SSLE) is an individual contributor with recognized expertise responsible for tasks and work throughout the entire vehicle development lifecycle including requirements definition, design and implementation, testing, and problem resolution. Agile, systems engineering, requirements and embedded controls development and calibration knowledge are a definite plus. The drive and tenacity to grow technically and professionally while working on some of General Motor’s most exciting features is a must
Responsibilities
Perform complex sub-system analysis to define functional controls and hardware requirements, including the definition of:
Noise factors (e.g., aging, build variation, environmental, etc.)
Interface mapping (e.g., inputs to outputs)
Actuator and sensor performance requirements
Input to output transfer functions (e.g., latency, overshoot, oscillation, etc.)
Calibration requirements
Regulatory, safety and customer facing interactions (e.g., FE/CO2, DQ, Emissions, NVH, Performance)
Signal/data retention
Leverage physical (e.g., vehicle, bench) and virtual (e.g., models, simulation) to establish and test use cases and acceptance criteria for normal and degraded states of applicable sub-systems
Create and maintain BTS (Behavioral Technical Spec) or Sub-System Technical Specification (SSTS) documents for applicable Solutions/ Subsystems
Create and maintain sub-system specifications in requirements management software (e.g., Doors, DNG, Gerrit, Jama Connect, codebeamer, etc.)
Root cause all applicable sub-system related issues and translate solutions into new or revised requirements
Create and maintain Functional Architecture Documents (FADs)/Context Diagrams with the assistance of Global Architecture teams
Lead sub-system level FMEAs/Solution FMEAs and collaborate on System and Component FMEAs
Use Failure Mode and Effect Analysis (FMEA) Integration Tool (FIT) for managing FMEA processes across applicable subsystems
Create and maintain Features, Stories, and/or Change Requests to manage requirements and specifications of sub-systems using change management tools (e.g.Jira)
Collaborate with Controls and Software Engineers to review software implementation ensuring compliance with requirements
Review Owner’s Manual and Service Information related to the applicable sub-system
Provide guidance and input for feature design verification plan by working with System and/or Feature Owners and Validation Engineers
Maintain open requirements issue list and review, track, and report on progress and status
Support advanced technical work projects that drive future features and vehicle enhancements
Requirements
Bachelor’s degree in electrical, Mechanical, related engineering discipline or equivalent experience.
Minimum of 4+ years of experience in the field of expertise
Strong analytical problem-solving skills, including independent judgment and decision-making skills, where problems are very unusual and extremely difficult
Demonstrated communication and interpersonal skills required to build relationships with team members and customers to solve problems and resolve issues
Physics-based understanding of the Voice-of-Customer
Ability to effectively communicate issues, status and recommendations to leadership
Proven ability in project management skills and ability to teach others
Ability to prioritize work with only limited direction from manager
Desired Skills
Masters or PhD in Engineering with an emphasis on Controls
Experience related to specifying physics of dynamic electromechanical systems (e.g., Steering, Brakes, Chassis, Suspension, Electrification, Thermal, etc.)
Experience with calibration, software, and controls development
Experience leveraging simulation environments and plant modeling for testing or requirements generation is a plus (e.g., Matlab/Simulink, CarSim, GT-Power, D-Space, ETAS, etc.)
Experience with requirements management tools (e.g., Doors, Jama Connect, codebeamer, etc.)
Experience with change management tools (e.g., IBM Rational Team Concert, Jira, etc.)
Experience with OBD regulations requirements
Experience with safety critical systems
Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.
Why Join UsWe aspire to be the most inclusive company in the world. We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Our Work Appropriately philosophy supports our foundation of inclusion and provides employees the flexibility to work where they can have the greatest impact on achieving our goals, dependent on role needs. Every day, we want every employee, no matter their background, ethnicity, preferences, or location, to feel they belong to one General Motors team.
Diversity InformationGeneral Motors is committed to being a workplace that is not only free of discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that workforce diversity creates an environment in which our employees can thrive and develop better products for our customers. We understand and embrace the variety through which people gain experiences whether through professional, personal, educational, or volunteer opportunities.
We encourage interested candidates to review the key responsibilities and qualifications and apply for any positions that match your skills and capabilities.
Equal Employment Opportunity Statement
Accommodation is available for applicants with disabilities. Should you be contacted by General Motors of Canada, please advise if you require accommodation. General Motors of Canada values diversity and is an equal opportunity employer.
#J-18808-Ljbffr-
Sub-system lead engineer
6 days ago
Markham, Canada General Motors Canada Full timeJob DescriptionThis position is classified as a Hybrid position, meaning the successful candidate will work at our Markham office three (3) days per week. The Role A VMEC Sub-System Lead Engineer (SSLE) develops some of General Motor’s most advanced and exciting mobility features. This dynamic role supports innovative technology development applicable to...
-
Sub-system lead engineer
5 days ago
Markham, Canada General Motors Canada Full timeJob Description This position is classified as a Hybrid position, meaning the successful candidate will work at our Markham office three (3) days per week. The Role A VMEC Sub-System Lead Engineer (SSLE) develops some of General Motor’s most advanced and exciting mobility features. This dynamic ro
-
VMEC Sub-System Lead Engineer
2 weeks ago
Markham, Canada General Motors Full timeHybrid: - Position does not require an employee to be on-site full-time but the general expectation is that the employee be onsite three (3) days a week to the Markham or Oshawa offices of General Motors of Canada Company. A VMEC Sub-System Lead Engineer (SSLE) develops some of General Motor’s most advanced and exciting mobility features. This dynamic...
-
VMEC Sub-System Lead Engineer
2 weeks ago
Markham, Canada General Motors Full timeHybrid: - Position does not require an employee to be on-site full-time but the general expectation is that the employee be onsite three (3) days a week to the Markham or Oshawa offices of General Motors of Canada Company. A VMEC Sub-System Lead Engineer (SSLE) develops some of General Motor’s
-
VMEC Sub-System Lead Engineer
7 days ago
Markham, Ontario, Canada General Motors Full timeJob Description Preferred Skills and Experience Master's or PhD in Engineering with an emphasis on Controls Experience related to specifying physics of dynamic electromechanical systems (e.g., Suspension, Chassis, Brakes, etc.) Experience with calibration, software, and controls development Experience leveraging simulation environments and plant...
-
Sub-System Lead Engineer
1 week ago
Markham, Canada General Motors Full timeJob Description Requirements Bachelor’s degree in electrical, Mechanical, related engineering discipline or equivalent experience. Minimum of 4+ years of experience in the field of expertise Strong analytical problem-solving skills, including independent judgment and decision-making skills, where problems are very unusual and extremely...
-
Lead Systems Engineer
4 weeks ago
Markham, Canada Jonas Software UK Full timeDescription : Lead Systems Engineer Information Technology & Security Department / TheCoraGroup Direct manager: Director IT & Security Onsite in Markham, ON TheCoraGroup is looking for a Lead Systems Engineer that has a passion for technology, if you are someone that keeps up with the latest Market Trends, has the aptitude to design...
-
Lead Systems Engineer
3 weeks ago
Markham, Canada Jonas Software UK Full timeDescription : Lead Systems Engineer Information Technology & Security Department / TheCoraGroup Direct manager: Director IT & Security Onsite in Markham, ON TheCoraGroup is looking for a Lead Systems Engineer that has a passion for technology, if you are someone that keeps up with the latest Market Trends, has the aptitude to design...
-
System Assurance Lead/Engineer
7 days ago
Markham, Ontario, Canada AECOM (New) Full timeAECOM System Assurance Lead/Engineer - TTC Projects Markham , Ontario Reqid: REF31767D Business Line: Architecture Business Group: DCS Company Description At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities...
-
System Assurance Lead/Engineer
1 week ago
Markham, Ontario, Canada AECOM (New) Full timeAECOM System Assurance Lead/Engineer - TTC Projects Markham , Ontario Reqid: REF31767D Business Line:Architecture Business Group: DCS Company Description At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean wat
-
Senior Engineering Designer
1 week ago
Markham, Ontario, Canada Qualcomm Full timeEngineering Group, Engineering Group ASICS Engineering General Summary:QUALCOMM is the world's leading developer of next-generation wireless and multimedia technology. As the world's leading wireless tech innovator, we push the boundaries of what's possible to enable next-gen experiences and drive digital transformation to help create a smarter, connected...
-
VMEC Sub-System Lead Engineer
3 weeks ago
Markham, Canada General Motors Full timeJob Description Preferred Skills and Experience Master's or PhD in Engineering with an emphasis on Controls Experience related to specifying physics of dynamic electromechanical systems (e.g., Suspension, Chassis, Brakes, etc.) Experience with calibration, software, and controls development Experience leveraging simulation environments...
-
Lead Engineer – I&C Systems Design
2 months ago
Markham, Ontario, Canada GE Full timeJob Description SummaryThe I&C Systems Design Engineer is responsible for design and analysis of I&C systems for nuclear power plant applications.Job DescriptionResponsible for Plant I&C Systems design activities that support:GE's BWRX-300 Small Modular Reactor (SMR) and/or Gen-IV reactor technologies including Natrium and ARC sodium fast reactors...
-
Lead Engineer – I&C Systems Design
3 weeks ago
Markham, Ontario, Canada GE Full timeJob Description SummaryThe I&C Systems Design Engineer is responsible for design and analysis of I&C systems for nuclear power plant applications.Job DescriptionResponsible for Plant I&C Systems design activities that support:GE's BWRX-300 Small Modular Reactor (SMR) and/or Gen-IV reactor technologies including Natrium and ARC sodium fast reactors...
-
System Assurance Lead/Engineer
1 month ago
Markham, Canada AECOM (New) Full timeAECOM System Assurance Lead/Engineer - TTC Projects Markham , Ontario Reqid: REF31767D Business Line: Architecture Business Group: DCS Company Description At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean wat
-
System Assurance Lead/Engineer
3 weeks ago
Markham, Canada AECOM (New) Full timeAECOM System Assurance Lead/Engineer - TTC Projects Markham , Ontario Reqid: REF31767D Business Line: Architecture Business Group: DCS Company Description At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean wat
-
Senior Design Verification Engineer
3 weeks ago
Markham, Ontario, Canada AMD Full timeJob Description WHAT YOU DO AT AMD CHANGES EVERYTHINGWe care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences – the building blocks for the data center, artificial intelligence, PCs, gaming and embedded....
-
SMTS Design Verification Engineer
4 weeks ago
Markham, Ontario, Canada AMD Full timeJob Description WHAT YOU DO AT AMD CHANGES EVERYTHINGWe care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences - the building blocks for the data center, artificial intelligence, PCs, gaming and embedded....
-
Senior Design Verification Engineer
1 month ago
Markham, Ontario, Canada AMD Full timeJob Description WHAT YOU DO AT AMD CHANGES EVERYTHINGWe care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences – the building blocks for the data center, artificial intelligence, PCs, gaming and embedded....
-
SMTS Design Verification Engineer
3 weeks ago
Markham, Ontario, Canada AMD Full timeJob Description WHAT YOU DO AT AMD CHANGES EVERYTHINGWe care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences - the building blocks for the data center, artificial intelligence, PCs, gaming and embedded....