Machine Set-up Operator

6 days ago

Brampton, Canada Gray Tools Canada Limited Full time

Gray Tools Canada is a Canadian Manufacturer and Distributor of Hand Tools and Accessories.

Gray Tools Canada, is currently hiring a Machine Set-Up Technician.

**Responsibilities and Duties**:

- Follow company safety rules as per supervisor's instructions and employee handbook including wearing personal protective equipment 100% of the time, and ensure that all procedures under the Occupational Health and Safety Act are being followed.
- Set-up a variety of machinery for production operation; Rotary Press, Cut off press, Roll Stamp Presses, Hot Press, Swages, Abrasive cut off, Manual Mills, Paint Spray guns, May also be required to mix paint and other Chemicals from time to time.
- Check and make minor repairs and equipment adjustments throughout shift as necessary.
- Ensure non-used moulds and related tooling is stored accurately in the proper place, so they can be retrieved promptly/ for the next set-up machines by ensuring that the equipment is operating safely and is producing proper quality parts and meets correct cycle time.
- Inspect moulds and tooling at end and beginning of run to ensure there are no defects. If there are, report to department supervisor immediately.
- Ability to read production drawings produced in AutoCad
- Knowledge of measurement tools; verniers, calipers and other measurement devises.
- Listen to information, experiences and knowledge passed on by shift employees, to ensure effective, non-repetitive problem solving and machine repair.
- Promote and facilitate positive communication with and between all employees.
- Valid forklift license Counterbalance

**Knowledge, Skills and Abilities**:

- Excellent command of the English Language, strong written and oral communication skills with ability to interact with all shop floor employees on a daily basis.
- Sound trouble shooting and root cause analysis skills
- Trade School diploma or equivalent experience of 5+ years in a manufacturing environment with machine set-up experience preferred
- Millwright is preferred
- Basic computer literacy is required
- Physical ability to lift up to 50 pounds

**Job Types**: Full-time, Permanent

**Salary**: $27.52-$28.51 per hour

Additional pay:

- Overtime pay

**Benefits**:

- Dental care
- Extended health care
- Vision care

Schedule:

- 8 hour shift
- Day shift

COVID-19 considerations:
All employees of Gray Tools are required to have the Covid 19 vaccine and all required boosters as per Health Guidelines.

**Experience**:

- Machine Operator Set up: 5 years (preferred)

  • Machine Tool Set-up Operator

    2 weeks ago

    Brampton, Canada Can Art Aluminum Extrusion Canada Inc. Full time

    Education: Secondary (high) school graduation certificate - Experience: 7 months to less than 1 year **Work setting**: - Manufacture **Tasks**: - Operate and set up machines to perform repetitive machining operations - Verify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers) - Perform routine maintenance on...

  • Set-up Operator

    1 day ago

    Brampton, Canada AlphaPoly Packaging Full time

    **Summary** As a Set-up Operator, you will be integral to the manufacturing process, ensuring that machinery is set up and maintained for optimal performance. Reporting to the Production Supervisor, your role requires strong mechanical knowledge and the ability to read blueprints. You will utilize core skills in machining and quality control, while your...

  • CNC Set-up Operator

    2 weeks ago

    Brampton, Canada Almag Aluminum Full time

    Reporting to the Fabrication Supervisor the CNC Set-up Operator organizes and sets up the manufacturing equipment to produce finished good to spec as identified by the engineering drawings. **DUTIES AND RESPONSIBILITIES** The duties and responsibilities of the CNC Set-up Operator are detailed below, but not limited to the following: - Set-Up and operate...

  • CNC Set-up Operator

    5 days ago

    Brampton, Canada ALMAG Full time

    Reporting to the Fabrication Supervisor the CNC Set-up Operator organizes and sets up the manufacturing equipment to produce finished good to spec as identified by the engineering drawings.DUTIES AND RESPONSIBILITIES The duties and responsibilities of the CNC Set-up Operator are detailed below, but not limited to the following:Set-Up and operate all CNC and...

  • Set-up Operator

    1 week ago

    Brampton, Canada AlphaPoly Packaging Full time

    **Summary** As a Set-up Operator - Aft, you will be instrumental in ensuring the efficient setup and operation of manufacturing equipment. This role requires strong mechanical knowledge and the ability to read blueprints, as you will be working with CNC machines, including lathes and milling machines. Your proficiency in premium skills such as CNC...

  • Set-up Operator

    3 days ago

    Brampton, Canada AlphaPoly Packaging Full time

    **Specific Accountabilities**: - Sets up machine for production and makes adjustments - Installs machine attachments according to job specifications - Loads rolls onto bag machines - Performs minor maintenance of equipment - Ensures to check the quality and specifications of bags - Performs minor maintenance and repairs - Trains all set-up operators on all...

  • CNC Set-up Operator

    4 days ago

    Brampton, Ontario, Canada Almag Aluminum Full time $22 - $28

    Reporting to the Fabrication Supervisor the CNC Set-up Operator organizes and sets up the manufacturing equipment to produce finished good to spec as identified by the engineering drawings.DUTIES AND RESPONSIBILITIES The duties and responsibilities of the CNC Set-up Operator are detailed below, but not limited to the following:Set-Up and operate all CNC and...

  • CNC Set-up Operator

    4 days ago

    Brampton, Ontario, Canada Almag Aluminum Full time

    Reporting to the Fabrication Supervisor the CNC Set-up Operator organizes and sets up the manufacturing equipment to produce finished good to spec as identified by the engineering drawings.DUTIES AND RESPONSIBILITIES The duties and responsibilities of the CNC Set-up Operator are detailed below, but not limited to the following:Set-Up and operate all CNC and...

  • Press Die Set Up Operator

    1 week ago

    Brampton, Canada A.B.M Tool & Die Company Ltd Full time

    Job Overview: We are seeking an **Press Die Set Up Operator** to join our team! **About us** A.B.M. Tool & Die Co. Ltd. is at the forefront of modern technology in the design and manufacture of stamped metal parts, automated and welded assemblies. Since the founding of our company in 1969, A.B.M. Tool and Die has consistently provided unmatched quality,...

  • Press Die Set Up Operator

    1 week ago

    Brampton, Canada A.B.M Tool & Die Company Ltd Full time

    Job Overview: We are seeking an **Press Die Set Up Operator** to join our team! **About us** A.B.M. Tool & Die Co. Ltd. is at the forefront of modern technology in the design and manufacture of stamped metal parts, automated and welded assemblies. Since the founding of our company in 1969, A.B.M. Tool and Die has consistently provided unmatched quality,...