CNC Programmer
4 weeks ago
We are seeking a skilled CNC Programmer to join our team at BWXT Precision Manufacturing Inc. in Brampton, Ontario.
The successful candidate will be responsible for creating CNC programs using MasterCam for Brother 3-axis mill with rotary table and STAR high-speed, 2-head, 2-axis lathes.
Key Responsibilities:
- Create CNC programs for machining components
- Select tools and fixtures to support CNC programs
- Design or select tooling, jigs, or fixtures for part manufacture
- Interface with production, engineering, and quality teams to ensure manufacturing processes are proven
- Work alongside CNC Machinists to set up machines and meet production schedules
- Operate machines to maintain production output
- Perform first-off and in-process dimension checks on production parts
- Participate in shop custodial operations, including chip spinning and general cleanliness
- Set up, troubleshoot, and operate CNC machines, including lathes, mills, and other power tools
- Read and interpret technical drawings to set up parts correctly
- Load programs into CNC machines or transfer CNC programs between equipment
- Enhance and follow approved work instructions and drawings
- Operate CNC Lathe, CNC Mill, manual mill, manual lathe, manual drill press, grinders, and other power tools
- Strive for 100% first-time throughput on setups and expedited through the QC department
- Perform basic machine adjustments, if necessary
- Read and interpret technical drawings to verify machined parts
- Visually or mechanically inspect parts for defects and record results
- Use measuring and inspection tools, including micrometers, calipers, and gauges
- Meet or exceed production and quality standards, minimizing reject rates
- Follow approved work instructions and drawings
- Perform simple machine preventative maintenance functions, including checking coolants and lubricants
- Remove cuttings from machines as required
- Keep machines and work areas clean and notify supervisors of machine abnormalities
- Use computer systems for basic departmental transactions
- Safely move components with lifting devices, such as jib cranes or fork-lifts
Administration:
- Follow company policies and health and safety procedures
- Wear personal protective equipment when required
- Report personal workplace injuries to supervisors immediately
- Report safety issues to supervisors as soon as possible
- Maintain an acceptable level of performance by following established policies and procedures
- Participate in continuous improvement efforts by supporting and implementing new ideas
- Set a positive example by maintaining a respectful attitude and cooperating with coworkers, management, and internal and external customers
- Be a productive team member and help meet established departmental and company goals
- Report to work for regularly scheduled shifts on time and ready to work
- Effectively give and receive feedback and ask questions when needed
- Willingly accept responsibility of sharing skills and knowledge with other employees
- Perform all other duties as assigned
Knowledge and Experience:
- Demonstrate a general knowledge of programming using CAM software to create toolpaths for 2-axis lathes and 3-axis mills
- 2-5 years of experience in CNC programming for 2-axis lathes and 3-axis mills or a minimum of three to six years of experience in a similar programming role
- Knowledge of Mastercam is an asset
- Knowledge of working in an ISO quality-driven company is an asset
- Experience with manufacturing precision-machined components and procedural knowledge of related processes, including heat treatment, plating, and assembly activities
- Excellent organizational and time management skills with a focus on continuous improvement
- Strong communication and problem-solving skills to work within a team-based environment
Total compensation for this position may include a base salary range of $56,000 to $72,000 per year, plus an annual cash incentive and a full range of medical, retirement, and other benefits.
BWXT Precision Manufacturing Inc. is an equal opportunity employer and welcomes applications from diverse candidates.
We thank all applicants for their interest; however, only those selected for an interview will be contacted.
-
CNC Programmer
4 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAt DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement or other studies, and operating machining tools to fabricate parts.Key Responsibilities:Develop computer applications for machines and...
-
CNC Programmer
1 month ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeCNC Programmer Job DescriptionDELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts.Key Responsibilities:Develop...
-
CNC Programmer
4 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAt DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement or other studies, and operating machining tools to fabricate parts.Key Responsibilities:Develop computer applications for machines and...
-
CNC Programmer
2 months ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAbout the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. as a key member of our manufacturing operations.Key ResponsibilitiesDevelop and implement computer applications for machines and processesConduct work measurement studies and optimize manufacturing proceduresProgram CNC machine tools and ensure efficient...
-
CNC Programmer
4 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAt DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement or other studies, and operating machining tools to fabricate parts. You will also be responsible for programming CNC machine tools, reading...
-
CNC Programmer
3 weeks ago
Brampton, Ontario, Canada Delstar Full timeAbout the Role:DELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement or other studies, and operating machining tools to fabricate parts.Key Responsibilities:Develop computer applications for machines...
-
CNC Programmer
4 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAbout the Role:DELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement or other studies, and operating machining tools to fabricate parts.Key Responsibilities:Develop computer applications for machines...
-
CNC Programmer
4 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAbout the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. in a permanent position. The successful candidate will be responsible for developing computer applications for machines and processes, conducting work measurement studies, and operating machining tools to fabricate parts.Key ResponsibilitiesDevelop and implement...
-
CNC Programmer
3 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAt DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. The ideal candidate will have a strong background in computer numerical control programming and experience with machine set-up, work measurement, and manufacturing procedures.Key Responsibilities:Develop computer applications for machines and processesRead blueprints and...
-
CNC Programmer Position
3 weeks ago
Brampton, Ontario, Canada BWX Technologies, Inc. Full timeJob Description/Duties: CNC Programmer ResponsibilitiesCNC Programmer Job Summary:BWXT Precision Manufacturing Inc. is seeking a skilled CNC Programmer to join our team in Brampton, Ontario. As a CNC Programmer, you will be responsible for creating CNC programs for our shop floor machines and interpreting project drawings to ensure accurate and efficient...
-
CNC Programmer: Fabrication Specialist
7 days ago
Brampton, Ontario, Canada Delstar Full timeWe are seeking an experienced CNC programmer to join our team at Delstar as a Fabrication Specialist. In this role, you will be responsible for programming and operating CNC machine tools to fabricate parts with high precision and accuracy.Key ResponsibilitiesProgram and operate CNC machine tools to fabricate partsDevelop computer applications for machines...
-
CNC Programmer Position
4 weeks ago
Brampton, Ontario, Canada BWX Technologies, Inc. Full timeJob Summary:The CNC Programmer/Operator is responsible for creating CNC programs for the shop floor machines and interpreting project drawings. This individual must be able to program toolpaths and modify, optimize, and monitor manufacturing processes. The CNC Programmer/Operator will also perform setup and operations of the machines when required.Key...
-
CNC Programmer Position
4 weeks ago
Brampton, Ontario, Canada BWX Technologies, Inc. Full timeJob Title: CNC ProgrammerJob Summary:The CNC Programmer/Operator creates CNC programs for the shop floor machines and is responsible for interpreting project drawings, programming toolpaths, and modifying, optimizing, and monitoring manufacturing processes. This individual also performs setup and operations of the machines when required.Key...
-
CNC Programmer
3 weeks ago
Brampton, Ontario, Canada Delstar Full timeJob SummaryCNC Programmer - Machine Automation Specialist at DelstarWe are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement or other studies, and operating machining tools to fabricate parts. You will also be responsible...
-
CNC Programmer
4 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeCNC Programmer Job DescriptionDELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts.Key Responsibilities:Develop and...
-
CNC Programmer
3 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeAbout the Role:DELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and optimizing manufacturing procedures.Key Responsibilities:Develop and implement computer...
-
CNC Programmer
3 weeks ago
Brampton, Ontario, Canada DELSTAR (2000) INC. Full timeJob SummaryDELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement or other studies, and operating machining tools to fabricate parts.Key ResponsibilitiesDevelop computer applications for machines and...
-
CNC Programmer
3 weeks ago
Brampton, Ontario, Canada Delstar Full timeAbout the Role:Delstar is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for setting up and operating machine tools to fabricate parts, as well as developing computer applications for machines and processes.Key Responsibilities:Conduct work measurement or other studies to optimize manufacturing...
-
CNC Machinist
4 weeks ago
Brampton, Ontario, Canada MGR Workforce Full timeJob SummaryWe are seeking a skilled CNC Programmer to join our team at MGR Workforce. As a CNC Programmer, you will be responsible for creating and optimizing CNC programs to drive our machining processes and produce high-quality parts according to engineering specifications.Key ResponsibilitiesProgram Development: Using CAD/CAM software to generate CNC...
-
CNC Programmer
1 week ago
Brampton, Ontario, Canada BWX Technologies, Inc. Full timeDuties and Responsibilities:As a CNC Programmer/Operator, you will create and modify CNC programs for our shop floor machines. Your responsibilities will include interpreting project drawings, programming toolpaths, and optimizing manufacturing processes. You will also perform setup and operation of machines, select tools and fixtures, and design or select...