Machinist

7 days ago

St Albert, Canada Pro-Western Plastics Ltd Full time

**Reports to**

Tool Room Supervisor

**Summary**

We are looking for a Machinist that will work in cooperation with the Tool Room Supervisor and the Engineer to repair and manufacture parts for molds to maintain the integrity and longevity of the molds. This position will include, but is not limited to, operating machining equipment, as well as sanding, stoning and fitting mold parts, as well as, manufacture and repair equipment in support of all other departments. The Machinist must possess registered Machinist or Tool and Die apprentice or Journeyman ticket. Additional certifications or licenses appropriate to manufacturing industry are an asset.

**Job Duties**
- Exercise caution and provide diligent support to facility systems to ensure safety
- Pause and report any unsafe work environments or employee concerns to Environmental, Health, and Safety (EHS) Personnel
- Study and interpret drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work pieces
- Fabricate special parts and components to meet specifications
- Ensure compliance with company policies and standards for cost control, waste reduction, quality, and safety
- Ensure high standards of workmanship and efficiency
- Ensure outputs meet production schedules, safety and quality standards
- Detect equipment malfunctions or out-of-tolerance machining and adjust machine, controls, or control media within capabilities as required to ensure quality of production
- Ensure proper use of required personal protective equipment at all times
- Follow manufacturing and processing procedures, set machine or equipment controls, carry out production and inspection processes
- Perform daily maintenance and safety checks on all equipment and tools
- Mark, record, and report defective products
- Maintain a clean working area free from dirt and debris between tasks and at end of day
- Set up, operate and maintain a variety of machine tools including CNC, EDM, manual mill and lathe
- Bolt, screw, or otherwise fasten parts and components together using hand and power tools and equipment
- Cut, drill, sand, or plane materials for snug fit
- Grind, sand, or polish surfaces using abrasive tools or machines
- Closely monitor machines for signs of problems while ensuring output is meeting set specifications
- Communicate with supervisor, engineers, production control, quality, and other shop personnel for assignments and to resolve machining or quality issues
- Position and install parts, subassemblies, and accessories using hand tools, power tools, and other aids like overhead hoists
- Maintain inventory and order materials as required
- Other duties that may be required

**Job Requirements**
- Registered Machinist or Tool and Die apprentice or Journeyman ticket
- Certifications or licenses appropriate to manufacturing industry
- Knowledge of appropriate materials, methods, and tools required in various machining processes
- Ability to operate required equipment in a safe and responsible manner
- Ability to effectively communicate both verbally and in writing
- Ability to lift heavy objects, walk, and stand for long periods of time
- Ability to perform strenuous physical labor
- Ability to prioritize and manage conflicting demands
- Demonstrated ability to operate material-handling equipment, overhead crane
- Ability to work overtime as required, at times with little notice

**Work Conditions**
- Exposure to hazards associated with the industry/trade
- Use of required personal protective equipment
- Operation and use of necessary tools, machinery, or equipment
- Extended periods of standing, and other physically demanding conditions
- Lifting, moving, or manipulating objects up to 100 pounds

**Benefits**:

- Dental care
- Life insurance
- Vision care

Schedule:

- 8 hour shift
- Monday to Friday
- Overtime

Ability to commute/relocate:

- St. Albert, AB T8N 3Z7: reliably commute or plan to relocate before starting work (required)

**Experience**:

- machinist: 1 year (preferred)

Work Location: In person

  • Machinist

    2 weeks ago

    St. Albert, Alberta, Canada Pro-Western Plastics Ltd Full time

    Reports toTool Room SupervisorSummaryWe are looking for a Machinist that will work in cooperation with the Tool Room Supervisor and the Engineer to repair and manufacture parts for molds to maintain the integrity and longevity of the molds. This position will include, but is not limited to, operating machining equipment, as well as sanding, stoning and...

  • Machinist

    4 weeks ago

    St. Catharines, Canada Aerotek Full time

    Our client is looking for CNC Machinists to join the team at their custom manufacturing facility located in St. Catharine's REQUIRED SKILLS AND QUALIFICATIONS 3+ years experience as a CNC machinist Experience with either CNC Boring Mill or Horizontal Lathe OR Vertical Lathe Experience with blueprints, sketches, drawings, manual specifications or...

  • Machinist

    4 weeks ago

    St. Catharines, Canada Aerotek Full time

    Our client is looking for CNC Machinists to join the team at their custom manufacturing facility located in St. Catharine's REQUIRED SKILLS AND QUALIFICATIONS 3+ years experience as a CNC machinist Experience with either CNC Boring Mill or Horizontal Lathe OR Vertical Lathe Experience with blueprints, sketches, drawings, manual specifications or...

  • Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada Aerotek Full time

    Our client is looking for CNC Machinists to join the team at their custom manufacturing facility located in St. Catharine'sREQUIRED SKILLS AND QUALIFICATIONS3+ years experience as a CNC machinist Experience with either CNC Boring Mill or Horizontal Lathe OR Vertical Lathe Experience with blueprints, sketches, drawings, manual specifications or sample parts...

  • Machinist

    4 weeks ago

    St. Catharines, Ontario, Canada Aerotek Full time

    Our client is looking for CNC Machinists to join the team at their custom manufacturing facility located in St. Catharine'sREQUIRED SKILLS AND QUALIFICATIONS3+ years experience as a CNC machinist Experience with either CNC Boring Mill or Horizontal Lathe OR Vertical Lathe Experience with blueprints, sketches, drawings, manual specifications or sample parts...

  • CNC Machinist/manual Machinist

    2 weeks ago

    St. Marys, Canada Echo-Tech Machine and Tool Ltd Full time

    We are a controlled goods facility working in the fields of Military and Nuclear. Echo-Tech is looking for experienced CNC Machinists with programming experience as well as operators and manual machinists as well. We do a wide variety of work in small runs and 1 offs. Our work is tight tolerance which is why our team is top notch in the industry. We are a...

  • Machinist Apprentice

    3 weeks ago

    St. Clements, Canada GForce Custom Fabrication & Installation Inc. Full time

    **GForce Custom Fabrication and Installation Inc. **is in search of an **experienced Machinist Apprentice** to join our dynamic in-shop team. As a qualified **experienced ** **Machinist and/or Machinist Apprentice** your skills include: - _**Minimum of 3 years experience or equivalent skills and knowledge.**_ - Experience with milling lathes and exposure...

  • CNC Machinist

    3 weeks ago

    St. Catharines, Canada High Strength Plates & Profiles Inc Full time

    HSPP is currently seeking an experienced CNC Machinist. We are looking for someone who has 3-5 years’ experience, working as a CNC Machinist, working with Steel Plate is an asset. We are looking for team players; HSPP works as a team to get our products to our customers. HSPP is an established family-owned and operated company with many long-term employees...

  • Machinist Apprentice

    3 weeks ago

    St. Clements, Canada GForce Custom Fabrication & Installation Inc. Full time

    **GForce Custom Fabrication and Installation Inc. **is in search of an **experienced Machinist Apprentice** to join our dynamic in-shop team. As a qualified **experienced ** **Machinist and/or Machinist Apprentice** your skills include: - _**Minimum of 3 years experience or equivalent skills and knowledge.**_ - Experience with milling lathes and exposure...

  • Machinist

    6 days ago

    St. Catharines, Canada Aerotek Full time

    Job Title: MachinistJob DescriptionSeeking skilled machinists experienced with manual and CNC lathes, milling machines, horizontal boring mills, hand, and power tools. Responsibilities include interpreting blueprints, sketches, drawings, and manual specifications to craft precise parts. Candidates will be tasked with programming, setting up, operating, and...

  • Manual Machinist

    2 weeks ago

    East St. Paul, Canada Inline Machine Solutions Ltd Full time

    We are currently looking to hire Machinist. Preferably level 3 or 4 or journeyperson. General experience in manual lathes and mills. Measuring equipments can be **Job Types**: Full-time, Part-time Part-time hours: 40 per week **Salary**: $15.00-$40.00 per hour **Benefits**: - Flexible schedule - On-site parking Flexible Language Requirement: - French...

  • Manual Machinist

    2 months ago

    St. Catharines, Canada CB Canada Full time

    Our client based in St. Catharines is looking for certified Manual Machinists to join their team. What's in it for you? Great teamFull time workPaid trainingBenefitsStaff eventsOpportunity for growth What will you be doing? Reading and interpreting blueprintsJob planning and executionQuality controlUsing machining techniques, manual and some CNCOther...

  • Manual Machinist

    4 weeks ago

    St. Catharines, Canada CB Canada Full time

    Our client based in St. Catharines is looking for certified Manual Machinists to join their team. What's in it for you? Great teamFull time workPaid trainingBenefitsStaff eventsOpportunity for growth What will you be doing? Reading and interpreting blueprintsJob planning and executionQuality controlUsing machining techniques, manual and some CNCOther...

  • Machiniste

    4 weeks ago

    St Laurent, Canada Métier Plus Full time

    Machiniste conventionnel À propos de l'entreprise : Nous représentons une entreprise reconnue par sa réputation et son expertise, elle devient un incontournable pour plusieurs gros joueurs dans le domaine de l’aéronautique. Elle devient, aussi, un employeur important à Montréal par son équipe de plus de 500 employés. Il s’agit d’un poste...

  • Machiniste

    4 weeks ago

    St Laurent, Canada Métier Plus Full time

    Machiniste conventionnel Description de l’entreprise et du poste & tâches et responsabilités de l’emploi : À propos de l'entreprise : Nous représentons une entreprise reconnue par sa réputation et son expertise, elle devient un incontournable pour plusieurs gros joueurs dans le domaine de l’aéronautique. Elle devient, aussi, un employeur...

  • General Machinist

    2 weeks ago

    St. Catharines, Canada Niagara Precision Limited Full time

    **About us** Niagara Precision Limited is a second generationn machine shop. From inception to present day, Niagara Precision Limited continues to specialize and excel in the CNC machining of tight tolerances and high precision components. Working closely with our customers, delivering quality and on-time products is our mission. Niagara Precision Limited...

  • Machiniste

    2 weeks ago

    St Laurent, Canada Métier Plus Full time

    Machiniste conventionnelDescription de l'entreprise et du poste & tâches et responsabilités de l'emploi :À propos de l'entreprise : Nous représentons une entreprise reconnue par sa réputation et son expertise, elle devient un incontournable pour plusieurs gros joueurs dans le domaine de l'aéronautique. Elle devient, aussi, un employeur important à...

  • Machinist

    2 months ago

    Prince Albert, Canada Applied Industrial Technologies Full time

    Reporting to the Production Supervisor, this role sets up and operates a variety of machine tools to manufacture (cut or grind metal or similar materials) precise dimensions of parts for the workshop or customers. Machinists are expected to represent the company in a positive and professional manner while ensuring the highest level of customer...

  • Machinist, Precision

    4 weeks ago

    St. Marys, Canada Echo-Tech Machine & Tool Ltd. Full time

    Work Term: Permanent - Work Language: English - Hours: 40 hours per week - Education: College, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 years - Experience: 5 years or more - or equivalent experience **Work setting**: - General manufacturing **Tasks**: - Read and interpret engineering drawings, blueprints, charts...

  • Machinist

    3 weeks ago

    St. John's, Canada Wajax Full time

    **The Opportunity** The Machinist is responsible for creating quality parts produced on various machines such as but not limited to lathes and milling machines and general shop equipment according to company plans, blueprints, and other diagrams. Responsibilities will include reading and interpreting blueprints and manuals to determine production processes...