Sheet Metal Fabricator

3 weeks ago

Saskatoon, Canada Black & McDonald Limited Full time

ABOUT THIS CAREER OPPORTUNITY

Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished products. You may also be required to set up fabricating machines and design custom templates. The position is located in Saskatoon, SK and will report directly to the Supervisor.

The successful candidate should be able to demonstrate a strong work ethic, willingness to learn, a great attitude, and a genuine passion for the trade. Sheetmetal Fabricators are required to be skilled in all manner of duct construction methods; comfortable with the use of common industry specific hand tools, power tools, and diagnostic tools; and adept at reading and interpreting technical literature. Day to day work may sometimes require long hours and lifting heavy loads.

B&M is committed continuous improvement and will endeavor to provide all training necessary to maintain the health and safety of our staff and support career development wherever possible.

Duties and responsibilities include but are not limited to the following:

  • Reading and interpreting engineering blueprints.
  • Constructing base templates if necessary.
  • Measuring and marking out cutting and bending lines.
  • Setting up metalwork machinery including rollers, drill presses, flame cutters, brakes, and shears.
  • Determine the appropriate welding equipment or method based on requirements.
  • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
  • Operate angle grinders to prepare the parts that must be welded.
  • Align components using calipers, rulers etc. and clamp pieces.
  • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
  • Performing quality checks on completed products.
  • Conforming with state and company safety regulations.
  • Completing job reports.

Competency Requirements

  • Communicates Effectively
  • Continuous Learning
  • Customer Focus
  • Problem Solving and Innovation
  • Values and Respects Others

Education Requirements

  • High school diploma or equivalent.
  • Registered apprentice or Red seal journey person ticket.

Work Experience & Skill Requirements

  • Relevant Industry Experience
  • AWS certification and advanced welding experience.
  • Proficiency with metal fabrication tools including shears, rollers, flame cutters, and drill presses.
  • Clean Class 5 SK Driver’s License and abstract
  • Excellent verbal and written communication skills
  • Ability to follow written and verbal instructions.
  • Ability to always maintain a professional demeanor with fellow employees, customers, and stakeholders.
  • Strong problem-solving skills.
  • Knowledge of basic computer skills including Microsoft Outlook and mobile device applications

Black & McDonald welcomes and encourages applications from persons with disabilities. Accommodations are available upon request for candidates taking part in all aspects of the recruitment and selection process.

#J-18808-Ljbffr

  • Sheet Metal Fabricator

    2 months ago

    Saskatoon, Canada RS Breakers and Controls Full time

    **SHEET METAL FABRICATOR** **Location**: Saskatoon, Saskatchewan **Company Overview**: We are a leading provider of electrical solutions, specializing in the design, fabrication, and installation of RS breakers and controls. Our commitment to innovation and quality craftsmanship has established us as a trusted partner in the industry. As we continue to...

  • Sheet Metal Fabricator

    2 weeks ago

    Saskatoon, Canada Tex Klassen Wholesale Ltd. Full time

    Tex Klassen Ltd. is a locally owned commercial / residential Metal Fabricating and Glazing shop based in Saskatoon. We are currently looking for a full-time Sheet Metal Fabricator to join our team. Responsibilities: - Read and interpret blueprints, maps, drawings and specifications - Operate metalworking machine to cut, punch, drill, shape or straighten...

  • Sheet Metal Fabricator

    1 week ago

    Saskatoon, Canada Black & McDonald Limited Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on...

  • Sheet Metal Fabricator

    4 weeks ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished...

  • Sheet Metal Fabricator

    2 months ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished...

  • Sheet Metal Fabricator

    4 weeks ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished...

  • Sheet Metal Fabricator

    3 weeks ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished...

  • Sheet Metal Fabricator

    5 days ago

    Saskatoon, Saskatchewan, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished...

  • Sheet Metal Worker

    2 months ago

    Saskatoon, Canada Ecco Supply Full time

    _Do you have experience in operating fabricating machines to cut and bend sheet metal?_ - Are you skilled in welding to join sheet metal parts?_ - Do you possess a valid driver's license?_ The Sheet Metal Worker will fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes and sheet metal fittings. Work may involve...

  • Sheet Metal Worker

    2 weeks ago

    Saskatoon, Canada Ecco Supply Full time

    _Do you have experience in operating fabricating machines to cut and bend sheet metal?_ - Are you skilled in welding to join sheet metal parts?_ - Do you possess a valid driver's license?_ The Sheet Metal Worker will fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes and sheet metal fittings. Work may involve...

  • Sheet Metal Worker

    3 weeks ago

    Saskatoon, Canada Ecco Supply Full time

    *** ECCO Custom Metal Fabricators is a full service sheet metal and fabrication facility located in Saskatoon. We specialize in custom and specialty metal fabricating. Providing product to various industries including but not limited to the HVAC industry. We use modern computerized equipment, sheet metal forming tools and various welding equipment. Our...

  • Sheet Metal Worker

    5 days ago

    Saskatoon, Saskatchewan, Canada Ecco Supply Full time

    _Do you have experience in operating fabricating machines to cut and bend sheet metal?_ Are you skilled in welding to join sheet metal parts?_ Do you possess a valid driver's license?_The Sheet Metal Worker will fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes and sheet metal fittings.Work may involve any of...

  • Sheet Metal Installer

    5 days ago

    Saskatoon, Saskatchewan, Canada Reliance Home Comfort Full time

    New Construction - Sheet Metal Installer By joining Reliance as a Sheet Metal Installer, you'll become an important team member and will be provided with the tools you need to succeed. Installation of sheet metal and duct work as per blueprint requirements to support our local Residential projects Responsible for assisting in the drawing, layout and...

  • Apprentice Sheet Metal Worker

    2 months ago

    Saskatoon, Canada Black & McDonald Limited Full time

    **ABOUT THIS CAREER OPPORTUNITY** Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in...

  • Sheet Metal Journeyperson

    1 week ago

    Saskatoon, Canada Revo Plumbing and Heating Inc. Full time

    _Revo Plumbing and Heating is a locally owned business that will bring you the highest quality work for a fair price. We value and take pride in every job that we do. This translates to a company who works hard for our customers._ **Sheet Metal Worker Journeyperson - Commercial** - Job Requirements:_ - Journeyperson Sheet Metal Worker - Saskatchewan ticket...

  • Sheet Metal Journeyperson

    2 weeks ago

    Saskatoon, Canada Revo Plumbing and Heating Inc. Full time

    _Revo Plumbing and Heating is a locally owned business that will bring you the highest quality work for a fair price. We value and take pride in every job that we do. This translates to a company who works hard for our customers._ **Residential Sheet Metal Worker Journeyperson** - Job Requirements:_ - Residential Journeyperson Sheet Metal - Saskatchewan...

  • Sheet Metal Apprentices

    5 days ago

    Saskatoon, Saskatchewan, Canada Pro-Western Mechanical Full time

    Are you an amazing _Sheet Metal Apprentice/Journeyperson? _ Work with an amazing team that is dedicated to quality workmanship and grow your skillsPro-Western Mechanical works across western Canada. We provide complete mechanical services, specializing in multi-dwelling residential: condos, apartments, hotels and light industrial/commercial.Offering...

  • Apprentice Sheet Metal Worker

    5 days ago

    Saskatoon, Saskatchewan, Canada Black & McDonald Limited Full time

    ABOUT THIS CAREER OPPORTUNITYBlack & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in Saskatoon, SK...

  • Apprentice Sheet Metal Worker

    5 days ago

    Saskatoon, Saskatchewan, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in...

  • Sheet Metal Apprentices

    4 weeks ago

    Saskatoon, Canada Pro-Western Mechanical Full time

    Are you an amazing _Sheet Metal Apprentice/Journeyperson? _ Work with an amazing team that is dedicated to quality workmanship and grow your skills! Pro-Western Mechanical works across western Canada. We provide complete mechanical services, specializing in multi-dwelling residential: condos, apartments, hotels and light industrial/commercial. Offering...