Quality Inspector

Found in: beBee jobs CA - 1 week ago

Guelph, Ontario, Canada Linamar Full time

Quality Inspector – Level 2

The Quality Inspector – Level 2 position, under general supervision, is responsible for inspecting products and performing quality audits including repetitive visual, mechanical, dimensional, and functional inspection. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with company standards. In addition, carry out diversified bench, first piece or floor inspections using simple inspection tools.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Ensure all assigned duties are completed on schedule.

· Intermediate drawing interpretations and SPC principles.

· Comprehend and apply G D and T concepts.

· Perform destructive testing and evaluation.

· Proficient at the various inspection and testing requirements.

· Operate the CMM and basic knowledge of programming.

· Issue Nonconforming Material Tags.

· Understand TS processes including nonconforming material, identification, and inspection processes.

· Assist with capability studies, audits, and gauge R and R as needed.

· Adhere to all H&S and environmental laws and procedures.

· Read the standards guide and manual to avoid inspection errors.

· Measure or weigh products to assess conformity to quality standards. Basic math skills required.

· Analyze cost and quality standards and carry out statistical quality control.

· Use computer applications to monitor quality.

Credentials

· High School Diploma or equivalent general education.

· Minimum two years of related experience.

· Capable of all Quality Inspector – Level 1.

· Intermediate knowledge of SPC and GDT.

· Able to read blueprints and interpret engineering drawings in addition to GDT.

· Ability to read and understand company procedure manuals.

· Previous exposure in conducting audits.

· Exposure to machining practices, experience with Metrology, SPC, knowledge of measuring techniques, gauging and inspection equipment.

· Able to use measuring equipment effectively, that includes micrometers, verniers, height and bore gauges.

· Use technical skills and knowledge to identify cause of problem.

· Basic understanding of programming and CMM.

Desired Characteristics

· Ability to resolve conflicts and determine reasons for errors in products.

· Make continuous improvement recommendations to quality management.

· Possess good interpersonal skills in order to interact with supervisor and to coordinate work and exchange information during quality meetings.

· Ability to work independently, coordinating work with work of others as needed.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

About Us

Linamar Corporation is a Canadian diversified global manufacturing company of highly engineered products across global industries & markets. From the entrepreneurial seeds planted by our dynamic founder, to the support provided along the way, all Linamar employees are poised for success in this fast-paced and rapidly growing environment. With access to the tools you need to succeed, you will make an impact along with other motivated and engaged people.

Linamar is committed to promoting accessible recruitment as outlined in the Accessibility for Ontarians with Disabilities Act. Linamar will attempt to accommodate persons with a disability in an appropriate and effective manner throughout all stages of the recruitment process. Accommodations will be provided upon request.

LIN

  • Quality Inspector

    Found in: beBee jobs CA - 1 week ago

    Guelph, Ontario, Canada Linamar Full time

    Quality Inspector – Level 1The Quality Inspector – Level 1 position, under direct supervision, is responsible for inspecting products and assists with quality audits. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with company standards. In addition, devise ordinary gauging or measuring set-ups...

  • Quality Inspector

    Found in: beBee jobs CA - 1 week ago

    Guelph, Ontario, Canada Linamar Full time

    Quality Inspector - Level 3 The Quality Inspector - Level 3 position, under general supervision, is responsible for inspecting products and performing quality audits and test and sample raw materials and incoming products to ensure compliance with company standards. Primarily accountable for approving products for distribution and initiating corrective...

  • Quality Inspector

    Found in: beBee jobs CA - 2 weeks ago

    Guelph, Ontario, Canada Linamar Full time

    QUALIFICATIONS:A college diploma in industrial engineering technology, manufacturing technology, or a related discipline, Welding inspection, level 1 or 2 is recommended. Ensure all assigned duties are completed on schedule Inspect welds for Quality/ Defects Inspect weld processes to ensure WI/ Drawings are being followed Ensure Weld process monitoring...

  • Quality Engineer

    Found in: beBee jobs CA - 1 week ago

    Guelph, Ontario, Canada Linamar Full time

    Quality EngineerThe Quality Engineer position, under general supervision, is responsible for performing routine to moderately complex inspections and set quality standards for both in-process and finished products and materials. Primarily accountable for developing methods for testing, sampling, and training and evaluating production and recommend...

  • Supervisor, Quality

    Found in: beBee jobs CA - 1 week ago

    Guelph, Ontario, Canada Linamar Full time

    Supervisor, QualityThe Quality Supervisor position is responsible for coordinating the day-to-day activities of a team of Quality Operators who check, test, and inspect raw materials, goods in process and finished products. In addition, monitor the performance of equipment and processes; identify, troubleshoot and resolve scheduling problems in order to...

  • Quality Supervisor

    Found in: beBee jobs CA - 1 week ago

    Guelph, Ontario, Canada Linamar Full time

    Quality SupervisorThe Quality Supervisor position is responsible for coordinating the day-to-day activities of a team of Quality Operators who check, test, and inspect raw materials, goods in process and finished products. In addition, monitor the performance of equipment and processes; identify, troubleshoot and resolve scheduling problems in order to...

  • Quality Inspector

    1 week ago

    Guelph, Canada Linamar Corp Full time

    Quality Inspector - Level 2 The Quality Inspector - Level 2 position, under general supervision, is responsible for inspecting products and performing quality audits including repetitive visual, mechanical, dimensional, and functional inspection. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with...

  • Quality Inspector

    2 weeks ago

    Guelph, Canada Linamar Corp Full time

    Quality Inspector - Level 1 The Quality Inspector - Level 1 position, under direct supervision, is responsible for inspecting products and assists with quality audits. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with company standards. In addition, devise ordinary gauging or measuring set-ups...

  • Quality Inspector

    2 hours ago

    Guelph, Canada Linamar Corp Full time

    Quality Inspector - Level 2 The Quality Inspector - Level 2 position, under general supervision, is responsible for inspecting products and performing quality audits including repetitive visual, mechanical, dimensional, and functional inspection. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with...

  • Quality Inspector

    6 days ago

    Guelph, Canada Linamar Corp Full time

    Quality Inspector - Level 3 The Quality Inspector - Level 3 position, under general supervision, is responsible for inspecting products and performing quality audits and test and sample raw materials and incoming products to ensure compliance with company standards. Primarily accountable for approving products for distribution and initiating corrective...

  • Quality Inspector

    Found in: beBee S CA - 2 weeks ago

    Guelph, Canada Linamar Full time

    Quality Inspector - Level 2 The Quality Inspector - Level 2 position, under general supervision, is responsible for inspecting products and performing quality audits including repetitive visual, mechanical, dimensional, and functional inspection. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with...

  • NDT Inspector

    Found in: Jooble CA O C2 - 1 week ago

    Guelph, ON, Canada Linamar Corporation Full time

    A college diploma in industrial engineering technology, manufacturing technology, or a related discipline, Welding inspection, level 1 or 2 is recommended. Inspect welds for Quality/ Defects Ensure Weld process monitoring sheets are being verified to weld equipment parameters Perform and make minor adjustments according to PM schedules on welding...

  • Quality Inspector

    Found in: Talent CA C2 - 7 days ago

    Guelph, Canada Linamar Corporation Full time

    Quality Inspector – Level 1 The Quality Inspector – Level 1 position, under direct supervision, is responsible for inspecting products and assists with quality audits. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with company standards. In addition, devise ordinary gauging or measuring set-ups...

  • Structural Steel Shop Quality Inspector

    6 days ago

    Guelph, Canada The Newton Group Full time

    Guelph, ON - About Us Our purpose at Newton Group is to excel in delivering; economical, high quality, low carbon, low energy and low maintenance building systems and structures in the ICI building industry. We strive to make and improve better products and develop our people to work together with various skills. We believe that a truly inspiring and...

  • Quality Inspector

    Found in: beBee S CA - 2 weeks ago

    Guelph, Canada Linamar Full time

    Quality Inspector – Level 1 The Quality Inspector – Level 1 position, under direct supervision, is responsible for inspecting products and assists with quality audits. Primarily accountable for testing and sampling raw materials and incoming products to ensure compliance with company standards. In addition, devise ordinary gauging or measuring set-ups...

  • Structural Steel Shop Quality Inspector

    7 days ago

    Guelph, Canada Newton Group Ltd. Full time

    **About Us** Our purpose at Newton Group is to excel in delivering; economical, high quality, low carbon, low energy and low maintenance building systems and structures in the ICI building industry. We strive to make and improve better products and develop our people to work together with various skills. We believe that a truly inspiring and diverse place...

  • Quality Assurance Inspector

    7 days ago

    Guelph, Canada Guelph Manufacturing Group, Inc. Full time

    Looking for your next opportunity in the fast-paced and exciting field of automotive manufacturing? Look no further! Join our team as our newest **Quality Assurance Inspector!** This role is for **Day and Afternoon shifts**. **Your daily responsibilities will include**: - Inspect product at all stages of manufacturing for conformance to customer...

  • Cut & Etch Quality Inspector

    7 days ago

    Guelph, Canada Guelph Manufacturing Group Full time

    Looking for your next opportunity in the fast-paced and exciting field of automotive manufacturing? Look no further! Join our team as our newest **Cut & Etch Quality Inspector** **Job Summary** Ensure that all product is inspected and controlled to meet the requirements of Guelph Manufacturing Group Inc. and its customers. As required, responsible for the...

  • Machining Inspector

    6 days ago

    Guelph, Canada Durose Manufacturing Limited Full time

    Durose Manufacturing Ltd, A leader and progressive manufacturer of fabricated Steel products, is seeking an experienced Machining Inspector familiar with CMM and Manual measurement techniques for their facility in Guelph. Duties & Responsibilities: - Inspect and verify dimensions of machined weldments and fabrications using precise measuring instruments...

  • Quality Inspector

    5 days ago

    Guelph, Canada Melitron Corporation Full time

    **ID** 23-45-10 **Location** Guelph, ON Canada **Schedule** Mon-Fri; 8:00am-4:30pm **The Position**: This is a fantastic opportunity to join a growing team and develop your manufacturing and technical knowledge base working in our high-tech production facilities. Our enclosure fabrication building employs state-of-the-art automated laser cutting, robotic...

  • Cut & Etch Quality Inspector Afternoons and Midnights

    Found in: Whatjobs CA C2 - 10 hours ago

    Guelph, Canada Guelph Manufacturing Group, Inc. Full time

    Looking for your next opportunity in the fast-paced and exciting field of automotive manufacturing? Look no further!Join our team as our newest Cut & Etch Quality Inspector Job Summary Ensure that all product is inspected and controlled to meet the requirements of Guelph Manufacturing Group Inc. and its customers.As required, responsible for the...

  • Quality Engineer

    Found in: beBee S CA - 2 weeks ago

    Guelph, Canada Linamar Full time

    Quality Engineer The Quality Engineer position, under general supervision, is responsible for performing routine to moderately complex inspections and set quality standards for both in-process and finished products and materials. Primarily accountable for developing methods for testing, sampling, and training and evaluating production and recommend...

  • Quality Engineer

    Found in: Talent CA C2 - 7 days ago

    Guelph, Canada Linamar Corporation Full time

    Quality Engineer The Quality Engineer position, under general supervision, is responsible for performing routine to moderately complex inspections and set quality standards for both in-process and finished products and materials. Primarily accountable for developing methods for testing, sampling, and training and evaluating production and recommend...

  • Quality Inspector

    Found in: beBee S CA - 2 weeks ago

    Guelph, Canada Linamar Full time

    QUALIFICATIONS: A college diploma in industrial engineering technology, manufacturing technology, or a related discipline, Welding inspection, level 1 or 2 is recommended. Ensure all assigned duties are completed on schedule Inspect welds for Quality/ Defects Inspect weld processes to ensure WI/ Drawings are being followed Ensure Weld process monitoring...

  • Cmm Operator/ Inspector

    6 days ago

    Guelph, Canada Durose Manufacturing Limited Full time

    Durose Manufacturing Ltd, A leader and progressive manufacturer of fabricated Steel products, is seeking a CMM Operator/ Inspector for their facility in Guelph. Duties & Responsibilities: - Operate Creaform scanner using PolyWorks CMM software. - Operate portable CMM machine with PC-DMIS software - Perform inspection of processed and fabricated components...

  • Quality Inspector

    Found in: Jooble CA O C2 - 1 week ago

    Guelph, ON, Canada Linamar Corporation Full time

    QUALIFICATIONS: A college diploma in industrial engineering technology, manufacturing technology, or a related discipline, Welding inspection, level 1 or 2 is recommended. Ensure all assigned duties are completed on schedule Inspect welds for Quality/ Defects Inspect weld processes to ensure WI/ Drawings are being followed Ensure Weld process...