CNC Machinist

7 days ago

Oakville, Ontario, Canada BWX Technologies Full time
Enhance your career at BWXT with in-house opportunities

Eligible for Employee Referral Bonus:
Please note this process follows the BWXT employee guidelines

Referral bonus only valid for externally referred applicants

JOB PURPOSE:


The CNC Machinist reports to the Production Supervisor and is responsible for the operation of one or more CNC machines.

The CNC Machinist manufactures large precision-machined components working to tolerances less than 0.0005" using four and five axis mills, lathes, and/or mill-turn equipment.

All work must be done purposefully with safety as the first priority.

ACCOUNTABILITIES:

  • Run multiple BWXT machines and demonstrates an ability to work on various BWXT parts of varying degrees of complexity.
  • Design and machine complex tooling / fixture as necessary.
  • Establish with CNC Programmers and Engineers the key dimensions that need to be trended at the machine in the dimension sheets and in the MCS to ensure process capability.
  • Adjust programs/reprogram the part in accordance with the approved PCR.
  • Set up, troubleshoot and/or operate one or more of the following machine(s), using vises, fixtures, chucks, etc.
, concurrently in assigned area under limited supervision:
CNC lathe, CNC mill, bandsaw, manual mill, manual drill press, and other power tools.

  • Read and interpret technical drawings to setup parts appropriately to ensure conformity and cycle time requirements.
  • May transfer CNC programs between CNC equipment.
  • Monitor to ensure Tool Life Management is implemented across the cell and in the respective machines which have automated systems.
  • Work with Manufacturing Engineering and Programming to prove out programs and lock them out, standardize and make minor changes to existing programs in accordance with established procedures.
  • Enhance and follow approved work instructions and drawings provided.
  • Strive to hit 100% first time throughput on setup's and expedited through the QC department.
  • Follow MCS and complete signoffs as required.
  • Perform basic machine adjustments, if necessary (ex. tool offsets).
  • Set tools per Tooling Set Sheet.
  • Read and interpret technical drawings to verify machined parts.
  • Complete PCR's to indicate process deficiencies or to make continuous improvement recommendations.
  • Follow tooling life replacement program.
  • Visually or mechanically inspect parts for defects (cracks, chips, dimension, surface finish, etc.) as part of inprocess inspection; record results and notify lead/supervisor of deviation as appropriate.
  • Comfortable using the following for measuring and inspection: various types of micrometers and calipers, profilometer, height gauge, indicators, edge finders, thread gauges, pin gauges, and bore gauges with master ring.
  • Understand and meet or exceed production and quality standards; seek to minimize reject rate.
  • Follow approved work instructions and drawings provided.
  • Required to perform some simple machine preventative maintenance functions, i.e. checking coolants, checking lubricants, and changing filters, etc.
  • Keep machines and work area clean; notify supervisor or maintenance when machine abnormalities occur.
  • Possess the ability to use the computer system for basic departmental transactions.
  • Safely move components with lifting devices such as overhead cranes, jib cranes, and forklifts.

KNOWLEDGE & EXPERIENCE:

  • Able to use a variety of BWXT machines and work on multiple BWXT parts to varying degrees of complexity.
  • Educational background in manufacturing or equivalent experience working on CNC machines.
  • CNC Machinist with a Certificate of Qualification is an asset.
  • 5+ years of experience running 4 and 5 axis CNC mills, multiaxis lathes, long lathes, and/or mill/turn machines.
  • Experience working in the aerospace, defence or nuclear industry is a definite asset.
  • Able to read and interpret engineering component drawings including a strong understanding of metrology and GD&T.
  • Demonstrated ability as an adaptable team player with strong communication and problemsolving abilities.
  • Strong ability to work independently to complete assignments promptly while maintaining the high standards required in our industry.
  • Experience using lifting devices (cranes and forklifts).
  • Please note this job will remain posted until all openings are filled._

  • CNC Machinist

    1 week ago

    Oakville, Ontario, Canada BWX Technologies, Inc. Full time

    Job Description/Duties CNC Machinist Date: May 30, 2024 Location: Oakville, ON, CA Company: BWX Technologies Enhance your career at BWXT with in-house opportunities. Eligible for Employee Referral Bonus. Please update your internal successfactors profile prior to applying to internal positions. Please note this process follows the BWXT employee guidelines....

  • CNC Machinist

    7 days ago

    Oakville, Ontario, Canada BWX Technologies Full time

    ​Enhance your career at BWXT with in-house opportunitiesEligible for Employee Referral Bonus: Please update your internal successfactors profile prior to applying to internal positions. Please note this process follows the BWXT employee guidelinesReferral bonus only valid for externally referred applicants JOB PURPOSE: The CNC Machinist reports to the...

  • CNC Machinist

    7 days ago

    Oakville, Ontario, Canada Gold Staff] Full time

    Job Description:Job Description Job Description Summary The CNC Machinist manufactures a variety of parts using CNC programmable lathes and milling machines.Job Description Safety · Always wear the proper personal protective equipment (PPE). · Follow all safety laws, regulations, codes, policies, and procedures. · Follow all tag-out and lock out...

  • CNC Milling Machinist

    3 weeks ago

    Oakville, Ontario, Canada Randstad Canada Full time

    Calling all CNC MILL MACHINISTS in the Oakville area Are you looking for a challenging role where you can use your CNC Machining skills to their fullest? In this busy, custom machine shop, there is lots of opportunity for development and learning new skills in a supportive, dynamic team environment.Read on for what we can offer you:AdvantagesWhat's in it for...

  • CNC Milling Machinist

    1 month ago

    Oakville, Ontario, Canada Randstad Canada Full time

    Calling all CNC MILL MACHINISTS in the Oakville area Are you looking for a challenging role where you can use your CNC Machining skills to their fullest? In this busy, custom machine shop, there is lots of opportunity for development and learning new skills in a supportive, dynamic team environment.Read on for what we can offer you:AdvantagesWhat's in it for...

  • CNC 5 Axis Machinist

    1 week ago

    Oakville, Ontario, Canada Coordinate Industries Ltd. Full time

    The Intermediate CNC 5 Axis Machinist - Afternoon Shift operates numerical control machines and machining centers to fabricate parts per engineering specifications without supervision. The Intermediate Machinist receives on-the-job training to set up jobs with supervision.1- Job Related Duties & Responsibilities Follow quality management system policies and...

  • CNC Machinist- Weekend Night Shift

    1 week ago

    Oakville, Ontario, Canada BWX Technologies, Inc. Full time

    Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: BWXT Precision Manufacturing Inc. is a subsidiary of BWXT Canada Ltd. BWXT Precision Manufacturing Inc. is a leading supplier of precision-machined components to the international nuclear industry. We specialize in the manufacture of fuel channel and feeder...

  • CNC Machinist- Weekend Night Shift

    7 days ago

    Oakville, Ontario, Canada BWX Technologies Full time

    BWXT Precision Manufacturing Inc. is a subsidiary of BWXT Canada Ltd. BWXT Precision Manufacturing Inc. is a leading supplier of precision-machined components to the international nuclear industry. We specialize in the manufacture of fuel channel and feeder components, tooling and fueling machine spares. JOB PURPOSE: The CNC Machinist reports to the...

  • Computer Numerical Control Machinist

    7 days ago

    Oakville, Ontario, Canada Robust Gear and Industries Full time

    Company DescriptionRobust Gear & Industries offers quality gearing at reasonable prices. Our precision gears cater to diverse industries such as Automotive, Aerospace, Defense, Medical, Oil and Gas, and Robotics. We offer a customer-centric approach, and build long-lasting partnerships and believe in practicing constant and never-ending improvement. Quality...

  • Computer Numerical Control Machinist

    1 week ago

    Oakville, Ontario, Canada Robust Gear and Industries Full time

    Company OverviewRobust Gear & Industries provides top-quality gears at affordable prices. Our precise gears serve various industries like Automotive, Aerospace, Defense, Medical, Oil and Gas, and Robotics. We take a customer-centered approach, fostering long-term relationships and embracing continuous improvement. Quality assurance is an essential part of...

  • CNC Milling Machinist- Day and Afternoon Shift

    1 week ago

    Oakville, Ontario, Canada VAC Developments Ltd Full time

    VAC Developments Ltd is a Canadian Aerospace and Defense Manufacturing Company. We are looking for experienced CNC Milling Machinist to join our Milling department.We are Hiring for all Shifts:- Day Shift:- Afternoon Shift- Please specify what shift you are looking for._- Responsibilities:_ Studies blueprints, work order, setup sheet, tool lists, operation...

  • CNC Operator

    7 days ago

    Oakville, Ontario, Canada Metrican Mfg. Co. Inc. Full time

    CNC OperatorCOMPANY DESCRIPTIONMetriCan is a leading Tier 2 supplier of metal automotive components. Our diverse capabilities allow us to serve all manufacturing needs, from prototyping to production.At MetriCan we are looking for positive, team-oriented people who can also work independently. It is imperative that all employees focus on efficiency, quality,...

  • CNC Programmer

    1 week ago

    Oakville, Ontario, Canada AppleOne Full time

    CNC Programmer Location is North York Pay rate is $30/hr and upPerks:Permanent role Benefits after probationDuties: Create N/C Programs for the Shop Floor using MasterCam 2020 Create and set up tooling sheets per N/C Programming requirements. Requisition special tools required to complete jobs. Attain and assess geometry file from the customer. Test program...

  • CNC Tool Setter

    7 days ago

    Oakville, Ontario, Canada VAC Developments Ltd Full time

    Job descriptionVAC Developments is a growing Canadian Aerospace and Defense Manufacturing Company located in Oakville.We are seeking an Experienced CNC Tool Setter to prepare tools/cutters for CNC machine shop.Responsibilities: Control Issue of Cutting Tools to machine shop and return to inventory. Setting up CNC Tools/Cutters in Tool Holder utilizing a...

  • Toolroom Machinist

    7 days ago

    Oakville, Ontario, Canada VAC Developments Ltd Full time

    TOOL ROOM TECHNICIAN, TOOL GRINDER/TOOL SETTERVAC Developments is a growing Canadian Aerospace and Defense Manufacturing Company located in Oakville. We are seeking a Toolroom Machinist to join our TeamResponsibilities: Maintains/grind cutting tools for CNC Department. Sets up CNC Machining holders with appropriate equipment. Issues tools and equipment and...

  • Toolroom Machinist

    1 week ago

    Oakville, Ontario, Canada VAC Developments Ltd Full time

    TOOL ROOM TECHNICIAN, TOOL GRINDER/TOOL SETTERVAC Developments is a growing Canadian Aerospace and Defense Manufacturing Company located in Oakville. We are seeking a Toolroom Machinist to join our TeamResponsibilities: Maintains/grind cutting tools for CNC Department. Sets up CNC Machining holders with appropriate equipment. Issues tools and equipment and...

  • CNC Set-up Operator

    7 days ago

    Oakville, Ontario, Canada POSS Design Ltd. Full time

    For over four decades, we have been researching and developing the highest performing mechanical separators in the industry.Today, over 1,600+ POSS machines are running in more than 68 countries, providing the highest available yields for our customers and delivering profitable results where byproduct used to be.We are currently looking for a CNC...

  • General Machinist

    1 week ago

    Oakville, Ontario, Canada Collins Aerospace Full time

    Date Posted:Country:CanadaLocation:LOC South Service Road West,Oakville,Ontario,L6L 5Y7,CanadaPosition Role Type:UnspecifiedSUMMARYCollins Aerospace is looking to hire General Machinist Apprentice who will be reporting to the Shop Supervisor, as the General Machinist Apprentice, you will work under the guidance of Machine Shop Technicians to produce aircraft...

  • CNC Maintenance Technician

    1 week ago

    Oakville, Ontario, Canada BWX Technologies, Inc. Full time

    Job Description/Duties: Job Summary: Responsabilities Summary Description of Job: CNC Maintenance Technician Date: May 30, 2024 Location: Oakville, ON, CA Company: BWX Technologies BWXT Precision Manufacturing Inc. is a subsidiary of BWXT Canada Ltd. BWXT Precision Manufacturing Inc. is a leading supplier of precision-machined components to...

  • CNC Lathe- Day and Afternoon Shift

    7 days ago

    Oakville, Ontario, Canada VAC Developments Ltd Full time

    VAC Developments Ltd is a Canadian Aerospace and Defense Manufacturing Company. We are looking for experienced CNC Machinists in our Lathe department.We are Hiring for all Shifts:- Day Shift:- Afternoon Shift- Please specify what shift you are looking for._Responsibilities Setup and run Mazak and Haas, Hardinge Lathes Create Mazatrol and/or G-Code program as...