![Norak Steel Construction Limited](https://media.trabajo.org/img/noimg.jpg)
Structural Fitter
2 weeks ago
The Structural Fitter's primary function is to layout, position, align, fit and secure large and complex structural components and framing based on technical drawings, schematics, welding process specifications, and other documentation in a structural steel plant.
Job Responsibilities & Key Accountabilities:
- Read and interpret drawings, blueprints, sketches, diagrams and welding process specifications, including the interpretation of welding symbols and tolerances in fractions, decimals and metric dimensions.
- Rig, hoist and move materials to storage areas or within worksite using overhead cranes using established safety precautions.
- Prepare work staging area and construct patterns or jigs / templates as guides for layouts.
- Determine the materials required, and plan the sequence of tasks to cut metal most efficiently. Lay out reference points and patterns on heavy metal according to specifications.
- Assemble and fit metal sections and plates to form complete units or subunits using tack welding, bolting, riveting or other methods.
- Set up and operate various heavyduty metalworking machines cutting using saws, iron workers, torches, plasma and gouging, manual or semiautomatic welding machines, grinders.
- Brace weldments to minimize distortion from welding and perform heat straightening of weldments. Perform dimensional inspections
- Ensure standards for safe working conditions are observed in accordance with the Occupational Health and Safety Act and participate in regular safety talks. Perform visual inspection of equipment including cranes, welding machines, cutters and other tools to ensure they are in safe working condition.
- Provide feedback on design improvements through communication with the Foreman and assist in preparation of Engineering Change Request.
- Ensure all works meets the guidelines and specifications of a first class fitter; including layout (comprehensive knowledge) and burning.
- Works overtime and/or weekends as required.
Job Specific Requirement/Knowledge/Experience:
- A minimum of 5 years of equivalent work experience in a large/heavy custom steel fabrication environment. Shift Work may be required.
- Previous experience working within an ISO9001 environment is preferred. Must be familiar with all position welding and a variety of welding processes (i.e. GMAW, FCAW, SAW)
- Must be able to work to close tolerances.
- Should be able to lift up to 50lbs
Job Types:
Full-time, Permanent
Benefits:
- Dental care
- Extended health care
- Life insurance
- Onsite parking
- Profit sharing
- RRSP match
- Vision care
Schedule:
- 8 hour shift
- Day shift
- Monday to Friday
- Morning shift
- Overtime
Supplemental pay types:
- Bonus pay
- Overtime
Ability to commute/relocate:
- Toronto, ON: reliably commute or plan to relocate before starting work (required)
Work Location:
One location
-
welder
2 weeks ago
Toronto, Ontario, Canada Finch Employment Full timeWelder - Fitter Needed in North York We are searching for an experienced Welder - Fitter to join our client's team in North York. The ideal candidate should be proficient in Stick/MiG Welding and have the ability to interpret architectural and structural drawings related to metal fabrication. Requirements: 1-5 years of Stick/MiG Welding experience 1-5...
-
metal fabrication worker
2 weeks ago
Toronto, Ontario, Canada IV Custom Fabrication Full timeEducation: No degree, certificate or diplomaExperience: Will trainTasksOperate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal productsAssist structural steel and platework fitters, sheet metal workers, metal machine operators or other metal workersSort metal sheets and parts, scrap metal and other...
-
metal fabrication worker
2 weeks ago
Toronto, Ontario, Canada IV Custom Fabrication Full timeEducation: Expérience: EducationNo degree, certificate or diplomaTasksOperate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal productsAssist structural steel and platework fitters, sheet metal workers, metal machine operators or other metal workersSort metal sheets and parts, scrap metal and other...
-
metal polisher helper
2 weeks ago
Toronto, Ontario, Canada Vaughan Metal Polishing Limited Full timeEducation: Secondary (high) school graduation certificateExperience: 1 to less than 7 monthsTasksOperate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal productsTransport items throughout plant using powered equipmentTransport raw materials, finished products and equipment throughout plant manually...
-
Bench Branch Leader
2 weeks ago
Toronto, Canada Bath Fitter Full time**Are you a natural leader? Enjoy traveling and building relationships wherever you go? Interested in management but never had the opportunity to build your skills.** Bath Fitter will arm you with the skills to be prepared for the unexpected and you will be the "go-to" when our Managers need support. You will also be a key player in contributing to...
-
Sprinkler Fitter
3 weeks ago
Greater Toronto Area, Canada Excel Fire Protection Inc Full time**About us** We are professional, agile, and innovative. Our work environment includes: - Growth opportunities Job Title: Fitter **Duties**: - Read and interpret blueprints, drawings, and specifications to determine the layout and assembly of structural steel components - Measure, cut, shape, and fit steel components using hand tools, power tools, and...
-
Gas Fitter
4 weeks ago
Toronto, Canada Matrix LabourLeasing Ltd. Full timeCurrently seeking Gas Fitters/Plumbers for a 1.5-month project in the **Hay River, North West Territories.** The project is a 40+ unit residential apartment building, Below is a description of this role. **Key Responsibilities**: - Water heater repair and replacement. - Gas furnace/boiler repair & replacement. - Water piping repair. - Waste piping...
-
metal fabrication worker
1 month ago
Toronto, Canada IV Custom Fabrication Full timeEducation: No degree, certificate or diplomaExperience: Will trainTasksOperate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal productsAssist structural steel and platework fitters, sheet metal workers, metal machine operators or other metal workersSort metal sheets and parts, scrap metal and other...
-
metal fabrication worker
4 weeks ago
Toronto, Canada IV Custom Fabrication Full timeEducation: Expérience: EducationNo degree, certificate or diplomaTasksOperate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal productsAssist structural steel and platework fitters, sheet metal workers, metal machine operators or other metal workersSort metal sheets and parts, scrap metal and other...
-
Commercial Kitchen Equipment Installer
3 weeks ago
Toronto, Canada Scoville Tech Full timeResponsibilities: - Read and interpret schematics and blueprints to determine the layout and assembly of structural components - Fit and assemble structural components according to specifications using hand tools and power tools - Measure, cut, and shape materials to fit specific requirements - Fabricate components as needed - Build, plumb, and align...
-
metal polisher helper
4 weeks ago
Toronto, Canada Vaughan Metal Polishing Limited Full timeEducation: Secondary (high) school graduation certificateExperience: 1 to less than 7 monthsTasksOperate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal productsTransport items throughout plant using powered equipmentTransport raw materials, finished products and equipment throughout plant manually...
-
metal polisher helper
4 weeks ago
Toronto, Canada Vaughan Metal Polishing Limited Full timeEducation: Expérience: EducationSecondary (high) school graduation certificateTasksOperate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal productsTransport items throughout plant using powered equipmentTransport raw materials, finished products and equipment throughout plant manually Immerse metal...
-
Plumber
1 month ago
Toronto, Canada Toronto Community Housing Full timeJob #: **8009** - Division: **Facilities Management** - Vacancy Type: **Full-time Permanent** - Affiliation: **Union: CUPE 416** - Contract Length: - Grade: **43TP** - # of Vacancies: **1** - Salary/Hourly Range: **38.07** - Hiring range/wage: **38.07** - Work Details (Days/hours): **Monday - Friday 40 hrs per week** - Posted Date: **8/2/23** - Existing or...
-
fitter - metal fabrication
4 weeks ago
Toronto, Canada North American Metalcraft Inc. Full timeEducation: Secondary (high) school graduation certificateExperience: 1 year to less than 2 yearsWork settingUrban areaTasksAssemble and fit plates and sections to form structuresInstall fabricated components in final productEquipment and machinery experienceDrillsSawsWork conditions and physical capabilitiesManual dexterityHand-eye co-ordinationCombination...
-
fitter - metal fabrication
4 weeks ago
Toronto, Canada North American Metalcraft Inc. Full timeEducation: Expérience: EducationSecondary (high) school graduation certificateWork settingUrban areaTasksAssemble and fit plates and sections to form structuresInstall fabricated components in final productEquipment and machinery experienceDrillsSawsWork conditions and physical capabilitiesManual dexterityHand-eye co-ordinationCombination of sitting,...
-
Commercial Kitchen Equipment Installer
7 days ago
Greater Toronto Area, Canada Scoville Tech Full timeResponsibilities: - Read and interpret schematics and blueprints to determine the layout and assembly of structural components - Fit and assemble structural components according to specifications using hand tools and power tools - Measure, cut, and shape materials to fit specific requirements - Fabricate components as needed - Build, plumb, and align...
-
Commercial Kitchen Equipment Installer
3 weeks ago
Greater Toronto Area, Canada Scoville Tech Full timeResponsibilities: - Read and interpret schematics and blueprints to determine the layout and assembly of structural components - Fit and assemble structural components according to specifications using hand tools and power tools - Measure, cut, and shape materials to fit specific requirements - Fabricate components as needed - Build, plumb, and align...
-
Greater Toronto Area, Canada Scoville Tech Full timeResponsibilities: - Read and interpret schematics and blueprints to determine the layout and assembly of structural components - Fit and assemble structural components according to specifications using hand tools and power tools - Measure, cut, and shape materials to fit specific requirements - Fabricate components as needed - Build, plumb, and align...
-
Greater Toronto Area, Canada Scoville Tech Full timeResponsibilities: - Read and interpret schematics and blueprints to determine the layout and assembly of structural components - Fit and assemble structural components according to specifications using hand tools and power tools - Measure, cut, and shape materials to fit specific requirements - Fabricate components as needed - Build, plumb, and align...
-
Appliance Technician
1 week ago
Greater Toronto Area, Canada Tasco Appliances Full time**Position**:Lead Installer (permanent, full time) **Location**:Greater Toronto Area (travel required) **Schedule**: Tuesday - Saturday **Compensation**:Competitive pay structure with monthly bonus - SIGNING BONUS OFFERED! **_ The Installer installs appliances into customer’s homes, free of damages and done in a timely, safe and damage free fashion....