Product Engineering Specialist
2 weeks ago
The Product Engineering Specialist is responsible for providing support to all engineering activities and initiatives at PM-Mississauga focusing on the development of new and existing product lines.
Your responsibilities will be to:
Provide technical support and support to various teams within Stackpole, PM-Mississauga.
Champion the APQP process and maintain the Master Timeline for the development and launching of new and modified products.
Participate and provide technical support during external and internal design reviews of products and processes.
Coordinate and champion the manufacture of prototype (pre-production) parts as required.
Selection of special characteristics
Communicate with customers in a technical capacity to ensure the mutual satisfactory resolution of problems.
Facilitate team efforts involving the setting of goals, problem solving and maintaining timelines to reach company objectives.
Participate in the implementation of corrective and preventative actions
Participate/lead capacity analysis studies
Gather and analyze data from trials to establish new parameters and process conditions to be implemented in production.
Transfer knowledge learned in the pre-production and production part approval stages of development to production staff during and after new program launches.
Guide other members of the department in the completion of daily tasks.
Lead Continuous improvement initiatives to improve the quality of Stackpole products and to reduce and eliminate waste in the value stream.
Develop test methods and carry out trials to test hypothesis and determine the effects of proposed changes to production parts and processes. Make recommendations based on the analysis of these results.
Create and implement new procedures through verbal and written instruction to production staff.
Develop and update Advanced Product Quality Planning documentation when required. These documents include but are not limited to Process Flow Diagrams, Process Failure Modes and Effects Analysis documents and other process specific documents.
Verify the accuracy and approve product documents when required.
Work with production to aid in the troubleshooting of production parts and processes; providing support where needed.
Work on multiple product lines where opportunities exist.
Work in compliance with Stackpole Quality and EHS Policies and Procedures, including IATF 16949 / ISO 14001.
All other duties as assigned
Our requirements :
Graduate Engineer or Technologist in a Metallurgical or Mechanical discipline.
Strong Computer Skills
Working knowledge in the use of AutoCad
Must be a hands-on individual with excellent organization skills.
Must have good interpersonal skills, strong communication skills and have previously demonstrated the ability to work to tight deadlines in a fast paced environment.
Experience working in a manufacturing environment, specifically automotive manufacturing.
Candidates with a Powder Metallurgy Technologist (PMT) Certification level 1 will be preferred, successful candidate will be required to obtain certifications
What we offer :
Johnson Electric, Stackpole offers talented people like you the opportunity to grow professionally and personally, surrounded by some of the most dedicated, innovative, and entrepreneurial colleagues you will find anywhere. Of course, we offer competitive pay and benefits, and far more than that, we offer you a culture driven by our values and designed to ensure that our most important asset—our people—can flourish.
Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.
-
Automation & Production Specialist Co-op
4 weeks ago
Mississauga, Canada PSI Engineering Full timeThe CompanyPSI Engineering manufactures and integrates automated pack and sortation systems for high volume warehouse and distribution centers who serve the business to consumer (B2C) market, drastically improving throughput and accuracy while reducing labor costs. We are seeking talented Automation & Production Specialist to focus on our small to...
-
Product Specialist
6 hours ago
Mississauga, Canada Eaton Full timeEaton’s Electrical sector is currently hiring a Product Specialist to join our team. This position is based at our Mississauga, ON facility and offers benefits from Day 1. **What you’ll do**: Under the direction of the Product Specialist Supervisor, the Product Specialist is responsible for the marketing, project managing, and engineering of our...
-
Product Engineering Specialist
2 weeks ago
Mississauga, Canada Johnson Electric Full timeCome Innovate Motion with us The Product Engineering Specialist is responsible for providing support to all engineering activities and initiatives at PM-Mississauga focusing on the development of new and existing product lines. Your responsibilities will be to: Provide technical support and support to various teams within Stackpole, PM-Mississauga. ...
-
Product Engineering Specialist
2 weeks ago
Mississauga, Canada Johnson Electric Full timeCome Innovate Motion with us The Product Engineering Specialist is responsible for providing support to all engineering activities and initiatives at PM-Mississauga focusing on the development of new and existing product lines. Your responsibilities will be to: Provide technical support and support to various teams within Stackpole, PM-Mississauga. ...
-
Mississauga, Canada Cummins Inc. Full timeDescription: We are looking for a talented Electrolyzer Application Engineer - Product Specialist to join our #Accelera by Cummins located in Fridley, Minneapolis. In this role, you will make an impact in the following ways: This dual customer/product focused position serves as the senior technical liaison between OEMs and represents our customers during...
-
Mississauga, Canada Cummins Inc. Full timeDescription: We are looking for a talented Electrolyzer Application Engineer - Product Specialist to join our #Accelera by Cummins located in Fridley, Minneapolis. In this role, you will make an impact in the following ways: This dual customer/product focused position serves as the senior technical liaison between OEMs and represents our customers during...
-
Mississauga, Canada Cummins Inc. Full timeDescription: We are looking for a talented Electrolyzer Application Engineer - Product Specialist to join our #Accelera by Cummins located in Fridley, Minneapolis. In this role, you will make an impact in the following ways: This dual customer/product focused position serves as the senior technical liaison between OEMs and represents our customers during...
-
Product Specialist
4 days ago
Mississauga, Canada Eaton Corporation Full timeEaton’s Electrical sector is currently hiring a Product Specialist to join our team. This position is based at our Mississauga, ON facility and offers benefits from Day 1.What you’ll do: Under the direction of the Product Specialist Supervisor, the Product Specialist is responsible for the marketing, project managing, and engineering of our electrical...
-
Product Specialist
4 days ago
Mississauga, Canada Eaton Corporation Full timeEaton’s Electrical sector is currently hiring a Product Specialist to join our team. This position is based at our Mississauga, ON facility and offers benefits from Day 1.What you’ll do: Under the direction of the Product Specialist Supervisor, the Product Specialist is responsible for the marketing, project managing, and engineering of our electrical...
-
Product Specialist
4 days ago
Mississauga, Canada Eaton Corporation Full timeEaton’s Electrical sector is currently hiring a Product Specialist to join our team. This position is based at our Mississauga, ON facility and offers benefits from Day 1.What you’ll do: Under the direction of the Product Specialist Supervisor, the Product Specialist is responsible for the marketing, project managing, and engineering of our electrical...
-
Mississauga, Canada Cummins Inc. Full timeDescription We are looking for a talented Electrolyzer Application Engineer - Product Specialist to join our #Accelera by Cummins located in Fridley, Minneapolis . In this role, you will make an impact in the following ways: This dual customer/product focused position serves as the senior technical liaison between OEMs and represents our...
-
Electrolyzer Application Engineer
3 weeks ago
Mississauga, ON, Canada Cummins Inc. Full timeDescription: We are looking for a talented Electrolyzer Application Engineer - Product Specialist to join our #Accelera by Cummins located in Fridley, Minneapolis. In this role, you will make an impact in the following ways: This dual customer/product focused position serves as the senior technical liaison between OEMs and represents our customers during...
-
Product Engineering Specialist
1 week ago
Mississauga, ON, Canada Johnson Electric Full timeCome Innovate Motion with us The Product Engineering Specialist is responsible for providing support to all engineering activities and initiatives at PM-Mississauga focusing on the development of new and existing product lines. Your responsibilities will be to: Provide technical support and support to various teams within Stackpole, PM-Mississauga....
-
Manufacturing Engineering Specialist
4 days ago
Mississauga, Canada Quantum Full timeNº de réf : 113658 Manufacturing Engineering Specialist Location: Mississauga Job Type: Permanent We are looking to hire a Manufacturing Engineering Specialist for a great manufacturing client located in Mississauga. Reporting to the Engineering Director the Manufacturing Engineering Specialist is responsible for developing and leading production...
-
Product Specialist
1 week ago
Mississauga, Canada KARL STORZ Full timeSUMMARY OF POSITION The Product Specialist is responsible for supporting sales and product support activities for KARL STORZ Video Imaging. The successful candidate will be able to elevate company standards, achieve sales goals and meet our customer’s expectations. RESPONSIBILITIES Support Account Executives to aid in the promotion, sale and customer...
-
Quality Engineering Specialist
4 days ago
Mississauga, Canada MAD Elevator Inc Full timeWe’re looking for like-minded individuals to join our team. This is a Full-time, Salaried position. About The Quality Engineering Specialist: Are you an experienced Quality Engineering Specialist looking to make a significant impact on quality, efficiency, and productivity? Are you passionate about generating strategic plans and implementing solutions...
-
Product Specialist
7 days ago
Mississauga, Canada KARL STORZ Full timeSUMMARY OF POSITIONThe Product Specialist is responsible for supporting sales and product support activities for KARL STORZ Video Imaging. The successful candidate will be able to elevate company standards, achieve sales goals and meet our customer’s expectations.RESPONSIBILITIES Support Account Executives to aid in the promotion, sale and customer...
-
Product Specialist
1 week ago
Mississauga, Canada KARL STORZ Full timeSUMMARY OF POSITION The Product Specialist is responsible for supporting sales and product support activities for KARL STORZ Video Imaging. The successful candidate will be able to elevate company standards, achieve sales goals and meet our customer’s expectations.RESPONSIBILITIES Support Account Executives to aid in the promotion, sale and customer...
-
Mechanical & Product Design Engineer
4 weeks ago
Mississauga, Canada The Engineering Institute of Canada Full timeResponsibilities Based in Mississauga, for over forty years our company, an industry-leading manufacturer and distributor of high-quality consumer electronics products, has set the standard for excellence in every product category we offer. Our focus is on providing the best in performance and Luxury/Value, while continually pushing the upper boundaries in...
-
Mechanical and Product Design Engineer
3 days ago
Mississauga, Canada The Engineering Institute of Canada Full timeResponsibilities Based in Mississauga, for over forty years our company, an industry-leading manufacturer and distributor of high-quality consumer electronics products, has set the standard for excellence in every product category we offer. Our focus is on providing the best in performance and Luxury/Value, while continually pushing the upper boundaries in...