CNC Programmer

2 days ago

Brampton, Ontario, Canada BWX Technologies, Inc. Full time
Job Summary:

BWXT Precision Manufacturing Inc. is seeking a skilled CNC Programmer to join our team in Brampton, Ontario. As a CNC Programmer, you will be responsible for creating and modifying CNC programs for our shop floor machines, interpreting project drawings, and optimizing manufacturing processes.

Key Responsibilities:
  • Create CNC programs using MasterCam for Brother 3-axis mill with rotary table and STAR high-speed, 2-head, 2-axis lathes.
  • Select tools and fixtures to support CNC programs, design or select any tool, jigs, or fixtures for part manufacture.
  • Create process set-up sheets and tool setup sheets for CNC machined components.
  • Interface with production, Engineering, and quality to ensure that all manufacturing processes are proven prior to the start of production.
  • Work alongside the CNC Machinists to set up machines as required to meet production schedule.
  • Operate any needed machines to keep production output aligned to the schedule.
  • Perform first-off and in-process dimension checks on production parts.
  • Participate in shop custodial operations, including chip spinning, packing of turning in drums, and general shop cleanliness efforts.
  • Set up, troubleshoot, and/or operate one or more of the following machine(s), using vises, fixtures, chucks, etc., concurrently in assigned area under limited supervision: CNC lathe, CNC mill, bandsaw, manual mill, manual drill press, and other power tools.
  • Read and interpret technical drawings to set up parts appropriately to ensure conformity and cycle time requirements.
  • Load programs into CNC machine or transfer CNC programs between CNC equipment.
  • Enhance and follow approved work instructions and drawings provided.
  • Operate one or more of the following machines: CNC Lathe, CNC Mill, manual mill, manual lathe, manual drill press, grinders, and other power tools.
  • Strive to hit 100% first-time throughput on setups and expedited through the QC department.
  • Perform basic machine adjustments, if necessary (e.g., tool offsets).
  • Read and interpret technical drawings to verify machined parts.
  • Visually or mechanically inspect parts for defects (cracks, chips, dimension, surface finish, etc.) as part of in-process inspection; record results and notify lead/supervisor of deviation as appropriate.
  • Comfortable to use various types of micrometers and calipers, height gauge, indicators, edge finders, thread gauges, pin gauges, and bore gauges with master ring.
  • Understand and meet or exceed production and quality standards; seek to minimize reject rate.
  • Follow approved work instructions and drawings provided.
  • Required to perform some simple machine preventative maintenance functions, i.e., checking coolants, checking lubricants, and changing filters, etc. Perform minor maintenance on the tooling or fixtures as required. Remove cuttings from any of the machines as required.
  • Keep machines and work area clean; notify supervisor or maintenance when machine abnormalities occur.
  • Possess the ability to use the computer system for basic departmental transactions.
  • Safely move components with lifting devices such as jib crane or fork-lift.
Administration:
  • Follow all company policies and health and safety procedures.
  • Always wear appropriate personal protective equipment when required.
  • Report any personal workplace injuries to direct supervisor immediately.
  • Report safety issues to direct supervisor as soon as possible.
  • Maintain an acceptable level of performance by following established policies and procedures and participate in continuous improvement efforts by supporting and implementing new ideas.
  • Set a positive example by maintaining a respectful attitude, cooperating with co-workers, management, and internal and external customers.
  • Be a productive team member and help meet established departmental and Company goals.
  • Report to work for your regularly scheduled shifts on time and ready to work.
  • Effectively give and receive feedback and willingly ask questions and seek direction when needed.
  • Willingly accepts responsibility of sharing skills and knowledge with other employees.
  • Perform all other duties as may be assigned from time to time.

  • CNC Programmer

    7 days ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    {"h2": "Job Summary", "p": "At DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts. If you have a strong...

  • CNC Programmer

    7 days ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    {"h2": "Job Summary", "p": "At DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts. If you have a strong...

  • CNC Programmer

    3 days ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    CNC Programmer Job DescriptionDELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts.Key Responsibilities:Develop and...

  • CNC Programmer

    4 days ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    CNC Programmer Job DescriptionDELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts.Key Responsibilities:Develop and...

  • CNC Programmer

    1 week ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    About the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. as a key member of our manufacturing operations.Key ResponsibilitiesDevelop and implement computer applications for machines and processesConduct work measurement studies and optimize manufacturing proceduresProgram CNC machine tools and ensure efficient...

  • CNC Programmer

    1 week ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    About the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. as a key member of our manufacturing operations.Key ResponsibilitiesDevelop and implement computer applications for machines and processesConduct work measurement studies and optimize manufacturing proceduresProgram CNC machine tools and ensure efficient...

  • CNC Programmer

    2 days ago

    Brampton, Ontario, Canada Metelix Products Inc.] Full time

    Job OverviewWe are seeking a skilled CNC Programmer to join our team at WIRE EDM INC. The successful candidate will be responsible for programming and operating CNC machines to produce high-quality parts.Key ResponsibilitiesProgram and operate CNC machines to produce parts with high precision and accuracyDevelop and implement efficient machining processes to...

  • CNC Programmer

    2 days ago

    Brampton, Ontario, Canada Metelix Products Inc.] Full time

    Job OverviewWe are seeking a skilled CNC Programmer to join our team at WIRE EDM INC. The successful candidate will be responsible for programming and operating CNC machines to produce high-quality parts.Key ResponsibilitiesProgram and operate CNC machines to produce parts with high precision and accuracyDevelop and implement efficient machining processes to...

  • CNC Programmer

    1 week ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    About the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. as a key member of our manufacturing operations.Key ResponsibilitiesDevelop and implement computer applications for machines and processesConduct work measurement studies and optimize manufacturing proceduresProgram CNC machine tools and ensure efficient...

  • CNC Programmer

    1 week ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    About the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. as a key member of our manufacturing operations.Key ResponsibilitiesDevelop and implement computer applications for machines and processesConduct work measurement studies and optimize manufacturing proceduresProgram CNC machine tools and ensure efficient...

  • CNC Programmer

    2 weeks ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    {"h2": "Job Summary", "p": "At DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement studies, and operating machining tools to fabricate parts. If you have a strong background in programming...

  • CNC Programmer

    2 weeks ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    {"h2": "Job Summary", "p": "At DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement studies, and operating machining tools to fabricate parts. If you have a strong background in programming...

  • CNC Programmer

    2 weeks ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    {"h2": "Job Summary", "p": "At DELSTAR (2000) INC., we are seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing computer applications for machines and processes, conducting work measurement studies, and operating machining tools to fabricate parts. If you have a strong background in programming...

  • CNC Programmer

    2 days ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    Job Title: CNC ProgrammerWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. The successful candidate will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts.Key Responsibilities:Develop...

  • CNC Programmer

    2 days ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    Job Title: CNC ProgrammerWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. The successful candidate will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts.Key Responsibilities:Develop...

  • CNC Programmer

    6 days ago

    Brampton, Ontario, Canada BWX Technologies, Inc. Full time

    Job Title: CNC ProgrammerWe are seeking a skilled CNC Programmer to join our team at BWXT Precision Manufacturing Inc. in Brampton, Ontario.Job Summary:The CNC Programmer will be responsible for creating and modifying CNC programs for our shop floor machines, interpreting project drawings, and optimizing manufacturing processes.Key Responsibilities:Create...

  • CNC Programmer

    6 days ago

    Brampton, Ontario, Canada BWX Technologies, Inc. Full time

    Job Title: CNC ProgrammerWe are seeking a skilled CNC Programmer to join our team at BWXT Precision Manufacturing Inc. in Brampton, Ontario.Job Summary:The CNC Programmer will be responsible for creating and modifying CNC programs for our shop floor machines, interpreting project drawings, and optimizing manufacturing processes.Key Responsibilities:Create...

  • CNC Programmer

    3 weeks ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    Job SummaryDELSTAR (2000) INC. is seeking a skilled CNC Programmer to join our team. As a CNC Programmer, you will be responsible for developing and implementing computer applications for machines and processes, as well as conducting work measurement studies and operating machining tools to fabricate parts.Key ResponsibilitiesMachine Setup and OperationSet...

  • CNC Programmer

    1 week ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    About the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. as a key member of our manufacturing operations.Key ResponsibilitiesDevelop and implement computer applications for machine tools and processesConduct work measurement studies and optimize manufacturing proceduresProgram CNC machine tools and operate machining tools...

  • CNC Programmer

    1 week ago

    Brampton, Ontario, Canada DELSTAR (2000) INC. Full time

    About the RoleWe are seeking a skilled CNC Programmer to join our team at DELSTAR (2000) INC. as a key member of our manufacturing operations.Key ResponsibilitiesDevelop and implement computer applications for machine tools and processesConduct work measurement studies and optimize manufacturing proceduresProgram CNC machine tools and operate machining tools...