Vertical Lathe Operator

5 months ago

London, Canada ADJ Industries Inc Full time

**Position Overview**:
The Vertical Lathe Operator reports to the Production Supervisor and is responsible for the operation, set-up and troubleshooting of one or more machines. CNC Operators at level III may also be required to alter and/or generate programs on various machines, work to setup and prove special projects, and train new personnel.

**Responsibilities and Accountabilities**:

- Set-up, troubleshoot and/or operate new and existing production parts using vises, fixtures, chucks, etc. with one or more of the following machine(s): CNC Lathe, CNC Mill, Bandsaw, Sandblaster, Manual Mill, Manual Drill Press, hand grinders, and other power tools. These tasks will be done under limited supervision.
- Alter/generate existing programs on four axis CNC machines by hand.
- Performs new set-ups on a variety of CNC equipment using an advanced level of tooling.
- Ensures that all set-ups are properly proven on CNC equipment for Level I and II Operators to run.
- Makes changes to existing programs to reflect engineering changes, casting variations, and efficiencies.
- Capable to transfer CNC programs between CNC equipment.
- Capable of building complex tooling and fixturing as necessary to support machining requirements.
- May perform detailed machine adjustments, if necessary.
- May read and interpret technical drawings to verify machines parts, and to determine machine set-up and production methods.
- May visually or mechanically inspect parts for defects (cracks, chips, dimension, surface finish, etc) as part of in-process inspection.
- Records results of defects and notifies lead/supervisor of deviation as appropriate.
- May use one or more of the following for measuring and inspection: tape measure, various types of micrometers and calipers, profilometer, height gauge, indicators, edge finders, thread gauges, pin gauges, and bore gauges with master ring.
- Understands and meets or exceeds production and quality standards; seeks to minimize reject rate.
- Follows approved drawings and a work instruction provided, and improves process and work instructions for new and existing parts.
- Required to perform machine preventative maintenance functions, i.e. checking coolants, checking lubricants, and changing filters, etc.
- Keeps machines and work area clean; notifies supervisor or maintenance when machine abnormalities occur.
- Safely move components with lifting devices such as overhead cranes, jib cranes, and fork-lifts.
- Possess the ability to use a computer system for basic departmental transactions as needed.
- Train other employees as required.
- Can be the recognized expert and may be sought out to perform leadership duties as necessary.
- Must serve as a resource to others in the resolution of complex technical problems.

**Administration**
- Maintains an acceptable level of performance by following established policies and procedures, and participating in continuous improvement efforts by supporting and implementing new ideas.
- Sets a positive example by maintaining a respective attitude, cooperating with co-workers, management, and internal and external customers.
- Be a productive team member and help to meet established departmental and Company goals.
- Wears appropriate personal protective equipment at all times when required
- Report any personal workplace injuries to direct supervisor immediately.
- Report safety issues to direct supervisor or HR Manager as soon as possible.
- Responsible for knowing where non-hazardous waste collection containers are located and for putting non-hazardous/hazardous wastes in appropriate containers.
- Report to work for your regularly scheduled shifts on time and ready to work.
- Follow all company policies and health and safety procedures.
- Effectively gives and receives feedback and willingly asks questions and seeks direction when needed.
- May work any and all shifts/days as required and may be asked to work between ADJ facilities.
- Willingly accepts responsibility of sharing skills and knowledge with other employees.
- Perform all other duties as may be assigned from time to time.

**Qualifications**:

- Must meet the requirements of the Canadian Controlled Goods Security Assessment Application as per Section 15 of the Controlled Goods Regulations, SOR/2001-32.
- Educational background in manufacturing or equivalent experience working on CNC machines
- 5+ years of experience working with CNC machines performing set-ups and program alterations. Vertical Lathe Experience Preferred.
- Must be proficient with all CNC control systems within area of responsibility.
- Must be proficient in Geometric Dimensioning and Tolerancing (GD&T).
- Must have full understanding of G and M codes in order to perform set-up functions
- Skilled knowledge of blue print reading.
- Skilled machining experience, material knowledge, and math skills.
Must meet all training requirements as defined by department

Accommodation is available in all aspects of the recruitment process. I

  • CNC Lathe Set-up/ Operator

    4 months ago

    London, Canada I.G.D. Machine & Tool Ltd. Full time

    We are currently hiring for afternoon shift 2 full time CNC LATHE Set up/ Operator positions to start immediately. 1 Year experience is required. Background check required. We offer competitive wage and benefit package. Some duties required but are not limited to the position: CNC LATHE set-up. Trouble shooting and problem solving Understanding of...

  • Custom Lathe Machinist

    4 months ago

    London, Canada Attica Manufacturing Inc. Full time

    **Machinist** **/ Tool & Die Maker**: - London, ON This is a full-time position reporting to the engineering manager with straight days scheduling with overtime available. **Qualification/experience**: - Must have minimum 5 years experience - Must have basic math skills to calculate depths of cut, speeds, and feeds - Past experience showing a strong...

  • Production Machinist

    5 months ago

    London, Canada Wabtec Full time

    Wabtec Corporation is a leading global provider of equipment, systems, digital solutions and value-added services for freight and transit rail. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation and Faiveley Transport, the company has unmatched digital expertise, technological innovation, and world-class manufacturing...

  • CNC Setup/operator

    5 months ago

    London, Canada E.C.-Tech Ltd. Full time

    **CNC Mill/Lathe - Set-up/Operators** ISO 9001:2015 Registered company looking for a highly motivated applicants who desire to succeed and grow with our organization. We offer a competitive salary, benefits, and excellent working conditions. - Job Setup, G and M Code Comprehension, Familiar with Fanuc and Haas Controls - Minimum of 3-5 years experience in...

  • CNC Setup/operator

    5 months ago

    London, Canada E.C.-Tech Ltd. Full time

    **CNC Mill/Lathe - Set-up/Operators** ISO 9001:2015 Registered company looking for a highly motivated applicants who desire to succeed and grow with our organization. We offer a competitive salary, benefits, and excellent working conditions. - Job Setup, G and M Code Comprehension, Familiar with Fanuc and Haas Controls - Minimum of 3-5 years experience in...

  • Metalworking Machine Operator

    3 weeks ago

    London, Ontario, Canada Metalcor Full time

    Job Title: Metalworking Machine OperatorWe are seeking a skilled Metalworking Machine Operator to join our team at Metalcor. As a key member of our production team, you will be responsible for operating various metalworking machines to fabricate parts and products.Key Responsibilities:Operate metalworking machines such as lathes, milling machines, and...

  • Metalworking Machine Operator

    3 weeks ago

    London, Ontario, Canada Metalcor Full time

    Job Title: Metalworking Machine OperatorWe are seeking a skilled Metalworking Machine Operator to join our team at Metalcor. As a key member of our production team, you will be responsible for operating various metalworking machines to fabricate parts and products.Key Responsibilities:Operate metalworking machines such as lathes, milling machines, and...

  • Manual Machinist

    5 months ago

    London, Canada E.C.-Tech Ltd. Full time

    **Manual Boring Mill Operators, Manual Lathe Operators, Manual Mill Operators** **Responsibilities and Duties** - Properly place or setup part in required fixturing - Comprehend dimensions or tolerances using all types of measuring tools including mics, calipers, dial indicators, etc - Job requires attention to detail and thorough in completing work tasks -...

  • Manual Machinist

    5 months ago

    London, Canada E.C.-Tech Ltd. Full time

    **Manual Boring Mill Operators, Manual Lathe Operators, Manual Mill Operators** **Responsibilities and Duties** - Properly place or setup part in required fixturing - Comprehend dimensions or tolerances using all types of measuring tools including mics, calipers, dial indicators, etc - Job requires attention to detail and thorough in completing work tasks -...

  • Specialist, Maintenance/operator Trainer

    3 days ago

    London, Canada General Dynamics Land Systems Full time

    **Description** Specialist, Trainer Maintenance/Operator Key Job Elements: - Maintain safe work practices - Conduct training for both Operators and Maintainers on GDLS-C chassis. - Travel to military locations in Canada and Globally. - Instructs and operates military vehicles and equipment in a training role. - Ensure proper documentation and updates are...

  • Bilingual Trainer

    5 months ago

    London, Canada General Dynamics Land Systems Full time

    **Description** At General Dynamics Land Systems we put our Customers at the centre of everything we do. Our commitment to protect and enable the people who serve drives us to develop products and systems that give them a clear advantage for mission success. We are looking for passionate individuals to help us deliver innovative, unique solutions to our...

  • CNC Setup

    5 months ago

    London, Canada Bradken Full time

    **Bradken** is a leading solutions provider and global manufacturer of innovative, custom-engineered products for the resources sector. With a 3000-strong workforce, our ability to adapt and evolve keeps us positioned firmly as global leaders in the wear solutions market. Bradken is looking for a **CNC Setup & Operator** to join our Specialty Products...

  • Tfc Maint Facilites Assoc

    5 months ago

    London, Canada Amsted Automotive Group Full time

    **Primary Function** Maintains or assists in maintaining grounds, minor building repairs / general upkeep and also conducts general plant hygiene activities including floor surface sanitizing, general waste removal, recycling activities including but not limited to steel and oils. Perform minor Preventative Maintenance duties on production...

  • Heavy Metal Fabrication Specialist

    1 week ago

    London, Ontario, Canada Metalcor Full time

    Job SummaryMetalcor is seeking a skilled Heavy Metal Fabrication Specialist to join our team. As a key member of our metal fabrication department, you will be responsible for operating various metalworking machines and equipment to fabricate high-quality metal parts and products.Key ResponsibilitiesOperate metalworking machines such as lathes, milling...

  • Afternoon Shift Manual Mill Operator

    2 months ago

    London, Canada Armo Tool Ltd Full time

    For over 50 years, Armo-Tool has been a family owned and operated business. Now in our third generation, we have earned a reputation built on providing complete “one-stop” precision tooling solutions, from the design stage to the beginning of production. Our over 50-year history of building long-term relationships with manufacturing companies throughout...

  • Machine Operator, CNC

    5 months ago

    London, Canada RIVERSIDE MILLWORK GROUP INC Full time

    Are you ready for change, challenge, and opportunity? Whether you're looking to launch your career or grow an existing one, Riverside Millwork Group is the type of company that supports its employees no matter where they are in life or their career. Riverside Millwork Group is a forward-thinking group of companies built upon a solid foundation of values...

  • Facilities Maintenance Associate

    5 months ago

    London, Canada Transform Automotive Canada LTD Full time

    **ABOUT THE ROLE** Amsted Automotive Group, Transform Canada, is looking for a Facilities Maintenance Associate maintains or assists in maintaining grounds, minor building repairs / general upkeep and also conducts general plant hygiene activities including floor surface sanitizing, general waste removal, recycling activities including but not limited to...

  • Automotive Engine Machinist

    2 months ago

    London, Canada Advance Auto Parts Full time

    :Job Duties and Responsibilities include (but are not limited to): - Machine parts within specifications - Operates boring machine to machine internal surfaces of cylinders in engine block. - Cleans parts, before and after machining - Verifies dimensions, using measuring instruments, such as micrometers, calipers, and height gauges to ensure adherence to...

  • CNC Operator I

    5 months ago

    London, Canada ADJ Industries Inc Full time

    **Job Title**: CNC Operator I/ Machinist** **Location**: 2068 Piper Lane / 290 Sovereign Road** **Reports to**: Production Supervisor** **Position Overview**: The CNC Operator I reports to the Production Supervisor and is responsible for the operation of one or more CNC machines. The CNC Operator I may also work on a variety of products and perform...

  • CNC Operator I

    5 months ago

    London, Canada ADJ Industries Inc Full time

    **Job Title**: CNC Operator I/ Machinist** **Location**: 2068 Piper Lane / 290 Sovereign Road** **Reports to**: Production Supervisor** **Position Overview**: The CNC Operator I reports to the Production Supervisor and is responsible for the operation of one or more CNC machines. The CNC Operator I may also work on a variety of products and perform...