Wheel Inspector

The Wheel Inspector role will perform visual, ultrasonic and magnetic particle inspection of wheels for conformance to applicable standards and specifications.

Required:

- Sufficient knowledge of ultrasonics to work with defect code.
- Firm understanding of math and measurement equations
- Quality Assurance experience is an asset

New employees **must** receive Level I certification in magnetic particle and ultrasonic inspection as provided by the American Society for Non-Destructive Testing and required by AAR within eighteen months on the job. Training and certification will be provided.

**Duties**:

- Properly mark wheels indicating defects.
- Record pertinent data on form related to wheel inspection.
- Perform periodic inspection on final line, visually checking stamping for readability and proper depth, chamfering, stenciling, bores, hubs, plates and pads. Check flange thickness and height by use of a flange gauge.
- Check overall appearance of wheel to make certain that it has been cleaned properly.
- Set up, change, or adjust equipment as necessary to assure correct inspection of wheels.
- Input information into computer to update inventories.
- May assist in breakdowns to resume production.
- Take wheel samples for analysis as necessary.
- Maintain inspection booth in clean and orderly fashion.
- Check tape lines on master tape line for accuracy when working final line.
- Check weight of wheels and keep record of weight, bore size and type when working final line
- Other duties as required.

**Behaviors**: Preferred
- Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well