CNC Set-up Machinist

3 months ago

Scarborough, Canada Manufacturing - CNC Machining Full time

**Hands on setting up of CNC Lathe & Milling machines/equipment** to ensure that precision metal parts are produced according to ISO quality requirements. Ensure the production floor machines are **running uninterrupted by troubleshooting machine concerns** in a timely manner to minimize and/or eliminate machine downtime.

KEY RESPONSIBILITIES

**Machine-Specific Responsibilities**:

- Responsible for the set-up, troubleshooting and changeover of assigned CNC lathe &/or milling machines to meet the production schedule including: tooling preparation for changeover and cleaning of old tooling.
- Test and run new programs where needed for new customer order and improve existing programs to reduce cycle time and increase output.
- Ensure set-up instructions are prepared for all new setups and ensure old setup sheets are up-to-date.
- Train and assist machine operators on changes and minor offset adjustments.
- Follow established work instructions for part being produced.

**Standard Set-Up Responsibilities**:

- Monitor first and last offs ensuring that quality of parts produced meet customer specifications. Report any non-conformances to Quality Assurance and shift supervisor.
- Ensure that all set-ups and repairs are done in a manner that will ensure the company’s objectives are met with respect to minimizing downtime, scrap and tooling costs.
- Analyze mechanical and operational problems on assigned CNC equipment, plan for and take corrective action.
- Make necessary corrections and running adjustments to maintain required quality and maximum production.
- Cleaning, inspecting, organizing and arranging servicing of old tooling as required.
- Provide continuous improvement suggestions/ideas to enhance the set-up operation.
- Provide equipment downtime and equipment related cost reports in order to focus on cost reduction and to be aware of maintenance related costs.
- Participate in new part tooling development including: tooling design review; prototype run activity; pre-launch or production trial run activity.
- Ensure that production and production support equipment are in good/safe working condition.
- Troubleshoot process and equipment challenges and perform assigned preventative maintenance duties on equipment as required.
- Work as a team member and pass on skills, knowledge and/or understanding of machining processes to new employees.
- Provide feedback to production supervisor, machine operators and appropriate staff regarding concerns, problem areas or deficiencies to ensure corrective action is taken. Participate in team problem solving and preventive/corrective action as required.
- Report out monthly statistics for management review and management board.
- Comply with the applicable responsibilities related to effective quality management in accordance with Quality Management System (QMS) ISO 9001:2015.
- Supports all plant ISO initiatives & requirements.
- Perform other duties as may be assigned by the Operations Manager or designate.
- High School Diploma (grade 12) required.
- Machinist Certificate and minimum of five (5) years of hands-on setup experience required.
- Minimum production experience in an automotive manufacturing environment preferred.
- Strong knowledge of setup and CNC Machining process is mandatory.
- Physically capable of performing all required job duties in a production environment. Accountable for work performed.
- Able to work overtime or off-shift as required.
- Ability to read blueprints.
- Ability to use standard hand and measuring tools.
- Ability to follow and understand written instructions.
- Ability to read layout data, gauges and dedicated measuring equipment.
- Demonstrated ability to communicate and interact with people at all levels, both inside and outside the organization.
- Exceptional analytical and problem solving skills.
- Must have technical math skills (grade 12 level) and possess a good mechanical aptitude.
- Demonstrated ability to work well with others.

**Job Types**: Full-time, Permanent

Pay: $30.00-$40.00 per hour

Additional pay:

- Bonus pay

**Benefits**:

- Company events
- Dental care
- Extended health care
- Life insurance
- On-site parking

Flexible language requirement:

- French not required

Schedule:

- Evening shift
- Monday to Friday
- Morning shift
- Weekends as needed

**Experience**:

- machinist: 5 years (required)

Work Location: In person

  • CNC Set-up Technician

    6 months ago

    Scarborough, Canada CNC Machine Shop Full time

    Set-up, write & test program, adjust and operate CNC Lathe & Milling machines/equipment to ensure that precision metal parts are produced according to ISO quality requirements. KEY RESPONSIBILITIES **Machine-Specific Responsibilities**: - Responsible for the set-up and changeover of assigned CNC lathe &/or milling machines to meet the production schedule...

  • CNC Machinist

    6 months ago

    Scarborough, Canada 2474193 Ontario Inc. oa Techline Manufacturing Full time

    **CNC Machinist (NOC 72100)** Employer: 2474193 Ontario Inc. o/a Techline Manufacturing Address: 50 Tiffield Rd, Unit 1, Scarborough, Ontario **Job Types**: Full-time, Permanent Number of Positions: 2 Hours per week - 37.5 **Salary**: $29/hour Benefits: None Techline Manufacturing currently has a need for a **CNC Operator **at our facility located in...

  • CNC Machinist

    7 months ago

    Scarborough, Canada 2474193 Ontario Inc. oa Techline Manufacturing Full time

    **CNC Machinist (NOC 72100)** Employer: 2474193 Ontario Inc. o/a Techline Manufacturing Address: 50 Tiffield Rd, Unit 1, Scarborough, Ontario **Job Types**: Full-time, Permanent Number of Positions: 3 Hours per week - 37.5 **Salary**: $29/hour Benefits: None Techline Manufacturing currently has a need for a **CNC Operator **at our facility located in...

  • CNC Boring Mill Machinist

    2 months ago

    Scarborough, Canada Samco Machinery Full time

    **Samco Machinery Ltd.** has been a leader in custom roll forming and manufacturing solutions for building/construction, automotive, HVAC, and appliance industries—and with shipping our products to over 35 countries. We pride ourselves in taking the time to listen and truly understand our customers’ business, to deliver functional solutions that help...

  • CNC Boring Mill Machinist

    4 months ago

    Scarborough, Canada Samco Machinery Full time

    **Samco Machinery Ltd.** has been a leader in custom roll forming and manufacturing solutions for building/construction, automotive, HVAC, and appliance industries—and with shipping our products to over 35 countries. We pride ourselves in taking the time to listen and truly understand our customers’ business, to deliver functional solutions that help...

  • CNC Machinist

    3 months ago

    Scarborough, Canada S. A. Armstrong Full time

    Imagine working at the forefront of innovation in fluid-flow technology, with over 1400 colleagues across the globe, and contributing to a legacy of excellence that spans eight manufacturing facilities on four continents. Armstrong Fluid Technology is more than just a leader in our industry; we are a community of the brightest and most creative minds, driven...

  • CNC (Computer Numerical Control) Machinist

    6 months ago

    Scarborough, Canada MTech Ltd. Full time

    Work Term: Permanent - Work Language: English - Hours: 80 to 88 hours bi-weekly - Education: Secondary (high) school graduation certificate - Experience: 5 years or more **Work setting**: - Automotive manufacturing - Aviation/aerospace manufacturing - General manufacturing **Tasks**: - Compute dimensions and tolerances of machine parts - Measure and lay...

  • CNC Lathe Operator

    4 months ago

    Scarborough, Canada Samco Machinery Full time

    **About Us** Samco Machinery Ltd. has been a leader in custom roll forming and manufacturing solutions and has grown from a one-person operation to a global company. We provide solutions for building/construction, automotive, HVAC and appliance industries and have shipped our products in over 35 countries. Our customers have come to rely on Samco Machinery...

  • CNC Lathe Operator

    1 month ago

    Scarborough, Canada Samco Machinery Full time

    **About Us** Samco Machinery Ltd. has been a leader in custom roll forming and manufacturing solutions and has grown from a one-person operation to a global company. We provide solutions for building/construction, automotive, HVAC and appliance industries and have shipped our products in over 35 countries. Our customers have come to rely on Samco Machinery...

  • CNC Machinist

    6 months ago

    Scarborough, Canada Titan Technology Full time

    **The Role** We are currently looking for a CNC Boring Mill Machinist to join our growing team! This position reports to the Assistant Plant Manager and is based at our Passmore facility. The CNC Boring Mill Operator is responsible for effectively and accurately machining parts on CNC Boring Mill. This is a full-time position on the day or afternoon...

  • CNC Machinist Programming Specialist

    2 weeks ago

    Scarborough Village, Ontario, Canada EM Dynamics Full time

    CNC Programmer Machinist Job OverviewWe are seeking a skilled and experienced CNC Programmer to join our team at EM Dynamics Inc. As a key member reporting to the Plant Manager, you will play a crucial role in operating a CAD/CAM-based computer to generate programs for CNC machines.Job Description:Operate a CAD/CAM-based computer to generate programs for CNC...

  • CNC Boring Mill Machinist

    6 months ago

    Scarborough, Canada Samco Machinery Full time

    **About Us** Samco Machinery Ltd. has been a leader in custom roll forming and manufacturing solutions and has grown from a one-person operation to a global company. We provide solutions for building/construction, automotive, HVAC and appliance industries and have shipped our products in over 35 countries. Our customers have come to rely on Samco Machinery...

  • CNC Boring Mill Machinist

    7 months ago

    Scarborough, Canada Samco Machinery Full time

    **About Us** Samco Machinery Ltd. has been a leader in custom roll forming and manufacturing solutions and has grown from a one-person operation to a global company. We provide solutions for building/construction, automotive, HVAC and appliance industries and have shipped our products in over 35 countries. Our customers have come to rely on Samco Machinery...

  • CNC Lathe Operator

    3 weeks ago

    Scarborough, Canada Samco Machinery Full time

    **About Us** **Samco Machinery Ltd.** has been a leader in custom roll forming and manufacturing solutions and has grown from a one-person operation to a global company. We provide solutions for building/construction, automotive, HVAC and appliance industries and have shipped our products in over 35 countries. Our customers have come to rely on Samco...

  • Conventional Boring Mill

    6 months ago

    Scarborough, Canada Mecon Industries Limited Full time

    Mecon Industries Ltd a Custom Machine Manufacturer has openings for CONVENTIONAL BORING MILL & CNC BORING MILL MACHINISTS with minimum 5 years experience in a non production shop. Must be able to do set-up, programming & operating for short runs and one of production. Must be able to work from drawings. Day shift only. Own tools an asset. **Job Types**:...

  • CNC Boring Mill Operator

    1 month ago

    Scarborough, Canada Samco Machinery Full time

    **Samco Machinery Ltd.** has been a leader in custom roll forming and manufacturing solutions for building/construction, automotive, HVAC, and appliance industries—and with shipping our products to over 35 countries. We pride ourselves in taking the time to listen and truly understand our customers’ business, to deliver functional solutions that help...

  • Conventional Boring Mill

    2 months ago

    Scarborough, Canada Mecon Industries Limited Full time

    Mecon Industries Ltd a Custom Machine Manufacturer has openings for CONVENTIONAL BORING MILL & CNC BORING MILL MACHINISTS with minimum 5 years experience in a non production shop. Must be able to do set-up, programming & operating for short runs and one of production. Must be able to work from drawings. Day shift only. Own tools an asset. Qualified...

  • Machinist

    7 months ago

    Scarborough, Canada Martin Mathieu Full time

    **Machinist** EM Dynamics Inc **Language** - English **Education** - Secondary (high) school graduation certificate **Experience** - 1 year to less than 2 years **Responsibilities**: - Read and interpret engineering drawings, blueprints, charts and tables. - Repair machine tools and parts. - Set up and adjust production machineries/tools. - Set up and...

  • CNC (Computer Numerical Control) Machinist

    6 months ago

    Scarborough, Canada Techline Manufacturing Full time

    Education: Secondary (high) school graduation certificate - Experience: 1 year to less than 2 years **Work setting**: - General manufacturing **Tasks**: - Set up and adjust production machineries/tools - Fit and assemble components and machine parts to close tolerance - Maintain, repair and calibrate precision measuring instruments - Document and report...

  • CNC (Computer Numerical Control) Machinist

    6 months ago

    Scarborough, Canada VPS GEAR MFG. & MACHINING LTD. Full time

    Work Term: Permanent - Work Language: English - Hours: 40 hours per week - Education: Secondary (high) school graduation certificate - Experience: 1 year to less than 2 years - or equivalent experience **Work setting**: - General manufacturing - Mining Industry **Tasks**: - Read and interpret engineering drawings, blueprints, charts and tables - Document...