CNC Operator I

5 months ago

London, Canada ADJ Industries Inc Full time

**Job Title**: CNC Operator I/ Machinist**

**Location**: 2068 Piper Lane / 290 Sovereign Road**

**Reports to**: Production Supervisor**

**Position Overview**:
The CNC Operator I reports to the Production Supervisor and is responsible for the operation of one or more CNC machines. The CNC Operator I may also work on a variety of products and perform machine adjustments if necessary.

**Responsibilities and Accountabilities**:

- May operate one or more of the following machine(s) concurrently in assigned area under limited supervision: CNC Lathe, CNC Mill, Bandsaw, Sandblaster, Manual Mill, Manual Drill Press, hand grinders, and other power tools.
- May perform basic machine adjustments, if necessary (ex. tool offsets).
- May read and interpret technical drawings to verify machined parts.
- May visually or mechanically inspect parts for defects (cracks, chips, dimension, surface finish, etc) as part of in-process inspection; records results and notifies lead/supervisor of deviation as appropriate.
- May use one or more of the following for measuring and inspection: tape measure, various types of micrometers and calipers, profilometer, height gauge, indicators, edge finders, thread gauges, pin gauges, and bore gauges with master ring.
- Understands and meets or exceeds production and quality standards; seeks to minimize reject rate.
- Follows approved work instructions and drawings provided.
- Required to perform some simple machine preventative maintenance functions, i.e. checking coolants, checking lubricants, and changing filters, etc.
- Keeps machines and work area clean; notifies supervisor or maintenance when machine abnormalities occur.
- Possess the ability to use the computer system as necessary for basic departmental transactions.
- Safely move components with lifting devices such as overhead cranes, jib cranes, and fork-lifts.

**Administration**
- Maintains an acceptable level of performance by following established policies and procedures, and participating in continuous improvement efforts by supporting and implementing new ideas.
- Sets a positive example by maintaining a respective attitude, cooperating with co-workers, management, and internal and external customers.
- Be a productive team member and help to meet established departmental and Company goals.
- Wears appropriate personal protective equipment at all times when required
- Report any personal workplace injuries to direct supervisor immediately.
- Report safety issues to direct supervisor or HR Manager as soon as possible.
- Responsible for knowing where non-hazardous waste collection containers are located and for putting non-hazardous/hazardous wastes in appropriate containers.
- Report to work for your regularly scheduled shifts on time and ready to work.
- Follow all company policies and health and safety procedures.
- Effectively gives and receives feedback and willingly asks questions and seeks direction when needed.
- May work any and all shifts/days as required and may be asked to work between ADJ facilities.
- Willingly accepts responsibility of sharing skills and knowledge with other employees.
- Perform all other duties as may be assigned from time to time.

**Qualifications**:

- Must meet the requirements of the Canadian Controlled Goods Security Assessment Application as per Section 15 of the Controlled Goods Regulations, SOR/2001-32.
- Educational background in manufacturing or equivalent experience working on CNC machines
- 0-2 years of experience working with CNC machines
- Basic machining experience, material knowledge and math skills.
- Must have knowledge of G and M codes to understand the functions.
- General knowledge of Geometric Dimensioning and Tolerancing (GD&T) an asset.
- General knowledge of blue print reading.
- Experience using lifting devices (cranes and fork-lifts).
- Must meet all training requirements as defined by department.

Successful applicants must meet all requirements under the Canada Controlled Goods Regulations (CGR) and must be approved as mandated by Public Works & Government Services Canada and applicable contractual obligations.

Accommodation is available in all aspects of the recruitment process. If accommodation is required applicants should make this known in advance.

**Job Types**: Full-time, Permanent

Pay: $18.00-$32.00 per hour

**Benefits**:

- Dental care
- Disability insurance
- Discounted or free food
- Extended health care
- Life insurance
- On-site parking
- Tuition reimbursement
- Vision care

Flexible Language Requirement:

- English not required

Schedule:

- 10 hour shift
- 8 hour shift
- Day shift
- Monday to Friday
- Night shift
- Overtime

Supplemental pay types:

- Overtime pay

Work Location: In person

  • CNC Operator I

    5 months ago

    London, Canada ADJ Industries Inc Full time

    **Job Title**: CNC Operator I/ Machinist** **Location**: 2068 Piper Lane / 290 Sovereign Road** **Reports to**: Production Supervisor** **Position Overview**: The CNC Operator I reports to the Production Supervisor and is responsible for the operation of one or more CNC machines. The CNC Operator I may also work on a variety of products and perform...

  • CNC Operator Iii

    3 months ago

    London, Canada ADJ Industries Inc. Full time

    **Position Overview**: The CNC Operator III reports to the Production Supervisor and is responsible for the operation, set-up and troubleshooting of one or more machines. CNC Operators in this level may also be required to alter and/or generate programs on various machines. The CNC Operator III will also work on a variety of products. **Responsibilities and...

  • CNC Operator

    5 months ago

    London, Canada Amsted Automotive Group Full time

    **Primary Function** The CNC machinist-operators set up and operate a variety of CNC machine tools and related equipment to make or modify parts or products with precise dimensions, consistently meeting quality, safety, and production expectations. **Duties and Responsibilities** - Operates various CNC machining centers (including changeover, part loading,...

  • CNC Operator

    6 months ago

    London, Canada Canduct Industries Full time

    **We are currently hiring CNC Operators to join our team!** If you are looking to join a company with a friendly atmosphere, and a passionate team with limitless potential, Canduct Industries may be a perfect fit for you. **What we are looking for**: - 3+ years' experience in a manufacturing role; experience in a woodworking environment is an asset. -...

  • CNC Operator

    6 months ago

    London, Canada RIVERSIDE MILLWORK GROUP Full time

    **COMPANY PROFILE**: Riverside Millwork Group is a truly forward thinking group of companies with over 40 years of success in the building materials and millwork markets. We are defined by the passion of our team members and their belief in our company’s vast potential. Our company is in the business of delivering a richer and more personalized customer...

  • Machinist - CNC Operator

    4 weeks ago

    London, Ontario, Canada Horiba Canada Inc. Full time

    Job SummaryWe are seeking a skilled Machinist - CNC Operator to join our team at Horiba Canada Inc. The successful candidate will be responsible for operating computer numerical control (CNC) machine tools to produce high-precision parts and components.Key ResponsibilitiesRead and interpret engineering drawings, blueprints, and charts to understand...

  • Machine Operator, CNC

    4 days ago

    London, Canada Riverside Millwork Full time

    Reporting to the Production Supervisor, the Machine Operator, CNC, is primarily responsible for the set up and operating of one or more woodworking machines (CNCs) to fabricate wood parts for millwork products. The Machine Operator, CNC, is accountable for contributing to the daily output of quality products and meeting department KPIs. This position always...

  • CNC Setup/operator

    5 months ago

    London, Canada E.C.-Tech Ltd. Full time

    **CNC Mill/Lathe - Set-up/Operators** ISO 9001:2015 Registered company looking for a highly motivated applicants who desire to succeed and grow with our organization. We offer a competitive salary, benefits, and excellent working conditions. - Job Setup, G and M Code Comprehension, Familiar with Fanuc and Haas Controls - Minimum of 3-5 years experience in...

  • CNC Setup/operator

    5 months ago

    London, Canada E.C.-Tech Ltd. Full time

    **CNC Mill/Lathe - Set-up/Operators** ISO 9001:2015 Registered company looking for a highly motivated applicants who desire to succeed and grow with our organization. We offer a competitive salary, benefits, and excellent working conditions. - Job Setup, G and M Code Comprehension, Familiar with Fanuc and Haas Controls - Minimum of 3-5 years experience in...

  • CNC Setup

    5 months ago

    London, Canada Bradken Full time

    **Bradken** is a leading solutions provider and global manufacturer of innovative, custom-engineered products for the resources sector. With a 3000-strong workforce, our ability to adapt and evolve keeps us positioned firmly as global leaders in the wear solutions market. Bradken is looking for a **CNC Setup & Operator** to join our Specialty Products...

  • CNC Break Operator

    5 months ago

    London, Canada DIAMOND AIRCRAFT INDUSTRIES Full time

    **Job Posting**: **Duties and responsibilities**: - Set up and operate CNC cutting, press brake and shearing machines to produce various aluminum stainless steel and carbon steel parts & components - Troubleshoot and resolve issues with CNC machines - Read and interpret blueprints, drawings and specifications - Cutting and formatting of sheet metal, using...

  • Woodworking CNC Operator

    5 months ago

    London, Canada Concept millwork Corporation Full time

    **About us** Concept Millwork Corporation ("CMC") is a manufacturer of high-end, quality, solid wood stile and rail panel doors Our primary customers serve the U.S. commercial market. We are a growing, family-owned business with annual sales of approximately $10 million employing approximately 50 people. Our focus is on a quality product delivered with...

  • CNC Operator Ii

    3 months ago

    London, Canada ADJ Industries Inc. Full time

    **Job Title**: CNC Operator II / CNC Machinist** **Location**: 2068 Piper Lane / 290 Sovereign Road** **Reports to**: Production Supervisor** **Position Overview**: The CNC Operator II reports to the Production Supervisor and is responsible for the operation, set-up and troubleshooting of one or more machines. The CNC Operator II will also work on a...

  • CNC Operator Ii

    5 months ago

    London, Canada ADJ Industries Inc. Full time

    **Job Title**: CNC Operator II / CNC Machinist** **Location**: 2068 Piper Lane / 290 Sovereign Road** **Reports to**: Production Supervisor** **Position Overview**: The CNC Operator II reports to the Production Supervisor and is responsible for the operation, set-up and troubleshooting of one or more machines. The CNC Operator II will also work on a...

  • CNC Operator/bender

    2 weeks ago

    London, Canada United Muffler Corp Full time

    **Job Summary** **Responsibilities** - Set up and operate machines to perform repetitive machining operations - Load and unload steel tube from machine - Entering the required codes into the computer numerically controlled (CNC) machine - Verify dimensions of parts machined using precise measuring instruments such as micrometers and calipers - Perform...

  • Machine Operator, CNC

    5 months ago

    London, Canada RIVERSIDE MILLWORK GROUP INC Full time

    Are you ready for change, challenge, and opportunity? Whether you're looking to launch your career or grow an existing one, Riverside Millwork Group is the type of company that supports its employees no matter where they are in life or their career. Riverside Millwork Group is a forward-thinking group of companies built upon a solid foundation of values...

  • CNC Machinist

    5 months ago

    London, Canada Armo Tool Ltd Full time

    For over 50 years, Armo-Tool has been a family owned and operated business. Now in our third generation, we have earned a reputation built on providing complete “one-stop” precision tooling solutions, from the design stage to the beginning of production. Our over 50-year history of building long-term relationships with manufacturing companies throughout...

  • CNC Machinist

    5 months ago

    London, Canada Armo Tool Ltd Full time

    For over 50 years, Armo-Tool has been a family owned and operated business. Now in our third generation, we have earned a reputation built on providing complete “one-stop” precision tooling solutions, from the design stage to the beginning of production. Our over 50-year history of building long-term relationships with manufacturing companies throughout...

  • CNC Machinist

    6 months ago

    London, Canada Armo Tool Ltd Full time

    For over 50 years, Armo-Tool has been a family owned and operated business. Now in our third generation, we have earned a reputation built on providing complete “one-stop” precision tooling solutions, from the design stage to the beginning of production. Our over 50-year history of building long-term relationships with manufacturing companies throughout...

  • CNC Machinist

    6 months ago

    London, Canada Armo Tool Ltd Full time

    For over 50 years, Armo-Tool has been a family owned and operated business. Now in our third generation, we have earned a reputation built on providing complete “one-stop” precision tooling solutions, from the design stage to the beginning of production. Our over 50-year history of building long-term relationships with manufacturing companies throughout...