Manufacturing Process Lead

2 weeks ago

Concord, Canada Acara Solutions Full time

**Responsibilities**:

- Assure that employees fully understand their roles in the manufacturing process and their responsibility to the established systems and regulations. Where understanding is lacking, work collaboratively with applicable departments to identify training requirements.
- Assist in the implementation of company policies as well as their accompanying programs and procedures, promoting a culture of safety and systems compliance.
- Responsible for contributing to a safe work environment by following and reiterating our company's 'Health & Safety' and 'Environmental' Policy. This includes promoting shop floor compliance to proper PPE, WHMIS, hazardous materials storage, waste reduction and hazardous waste disposal practices.
- Promote shop floor housekeeping and equipment calibration (ie. Daily Pre-Start Check Lists).
- Work closely with department leads and machine lead hands to properly train operators on production procedures, the work order system, lot reporting, using measuring devices and reading/understanding drawings.
- Use measuring devices (caliper, height gauge, venire etc.) and ensure the proper use of such instruments by operators on the floor to confirm conformity of incoming material and outgoing product.
- Achieve a full understanding of the products, prioritizing quality manufacturing by ensuring that applicable QA systems are applied and followed. This includes standard quality checks through all stages of production (Material, WIP, Finished Good, Packaged/Ready to Ship).
- Communicate production standards and identify part defects/deviations, following the proper protocol for documenting NCRs (ie. ICS documentation, forms, isolating parts for rework/analysis).

**Skills**:

- Manufacturing Experience (required)
- Previous leadership experience in a high-volume manufacturing setting
- Possesses leadership skills with the ability to motivate, guide and support others, setting an example for team members
- Detail-oriented with a commitment to quality
- Strong work ethic with the ability to work collaboratively within a team
- Systems knowledge with the desire to learn and develop expertise
- Prior experience in implementing management systems on a shopfloor
- Analytical and speaks with data
- Creative thinker with the ability to measure, maintain, audit and report system outputs

**Job Types**: Permanent, Full-time

**Salary**: $85,000.00-$95,000.00 per year

Flexible Language Requirement:

- French not required

Schedule:

- Monday to Friday

Ability to commute/relocate:

- Concord, ON: reliably commute or plan to relocate before starting work (required)

**Experience**:

- Manufacturing: 4 years (required)

Work Location: In person

  • Materials Administrator

    4 weeks ago

    Concord, Canada Multimatic Manufacturing Full time

    **Location**: Multimatic Manufacturing, Concord, Ontario, Canada **Position Overview**: Multimatic Manufacturing is the original production facility of Multimatic Inc. and is a leading supplier of hinges, door checks and innovative user-convenience products (such as Multimatic’s StepGate or BoxSideStep) to the North American automotive industry....

  • Materials Planning Analyst

    1 month ago

    Concord, Canada Multimatic Manufacturing Full time

    **Position Overview**: Multimatic Manufacturing is the original production facility of Multimatic Inc. and a leading supplier of hinges, door checks and innovative user-convenience products (such as Multimatic’s StepGate or BoxSideStep) to the North American automotive industry. Multimatic Mfg. uses flexible production systems that allow rapid product...

  • Materials Planning Analyst

    4 days ago

    Concord, Canada Multimatic Manufacturing Full time

    **Position Overview**: Multimatic Manufacturing is the original production facility of Multimatic Inc. and a leading supplier of hinges, door checks and innovative user-convenience products (such as Multimatic’s StepGate or BoxSideStep) to the North American automotive industry. Multimatic Mfg. uses flexible production systems that allow rapid product...

  • Administrator

    4 weeks ago

    Concord, Canada Multimatic Manufacturing Full time

    **Position Overview**: Multimatic Manufacturing is the original production facility of Multimatic Inc. and is a leading supplier of hinges, door checks and innovative user-convenience products (such as Multimatic’s StepGate or BoxSideStep) to the North American automotive industry. Multimatic Mfg. uses flexible production systems that allow rapid product...

  • Manufacturing Lead Hand/Supervisor

    7 hours ago

    Concord, Canada Recruiting For Less Full time $55,000 - $65,000

    Our client, a provider of powder coating services to the automotive OEM industry, is looking for a Manufacturing Lead Hand/Supervisor to assist in running production processes. Job Details:Position: Manufacturing Lead Hand/Supervisor - Automotive Parts Powder CoatingHours: Mon-Fri from 7AM-3:30PMSalary: 55-65k, BenefitsResponsibilities:Provide training and...

  • Project Manager

    1 month ago

    Concord, Canada Clover Tool Manufacturing Full time

    We are currently seeking a **Project** **Manager** to join our team! In this role you would be actively involved with Advanced Product Quality Planning (APQP), which includes change management for assigned programs, and assist with continues improvement for all products and processes. We are located at **8271 Keele Street, Concord, Ontario** **Shift...

  • Process Improvement Coordinator

    1 month ago

    Concord, Canada Vinylbilt Windows and Doors 2021 Inc. Full time

    **Vinylbilt Windows & Doors** A Canadian owned and operated company with a legacy dating back to 1974, Vinylbilt has successfully grown into one of Canada's leading vinyl window manufacturers. Our dedication to always being on the leading edge of design innovation, manufacturing excellence and most importantly customer service, this has been the company...

  • Manufacturing Technician

    4 days ago

    Concord, Canada Highview Kitchen Ltd Full time

    Education: College/CEGEP - Experience: 3 years to less than 5 years **Tasks**: - Conduct work measurement or other studies - Collect and compile operational or experimental data - Collect and analyze data and samples - Develop manufacturing and processing procedures - Assist in preparing estimates, schedules, specifications and reports - Set machine or...

  • Quality and Process Control Manager

    2 days ago

    Concord, ON, Canada Multy Home Full time

    Multy Home LP is a leading global manufacturer of floor covering and outdoor living products. With manufacturing and distribution facilities in Canada, Poland and the U.S.A. We are committed to sourcing sustainable or recycled material wherever possible in our production. Every year, Multy Home diverts 3 million tires and 15 million water bottles from...

  • Production Supervisor Past Manufacturing Setting a

    1 month ago

    Concord, Canada York Metal Products Full time

    York Metal Products Inc. 310 Rayette Road Concord, Ontario L4K 2G5 Production Supervisor York Metal Products is a rapidly growing manufacturing company. We are looking for a **Responsibilities**: - Plan, lead and organize work activities in accordance with daily production schedules while ensuring positive employee relations and a safe and effective...

  • Plant Services Lead Hand

    17 hours ago

    Concord, Canada Clover Tool Manufacturing Full time

    We are seeking a **Plant Services Lead Hand** to join our team! In this role you will be providing guidance and direction to Plant Services staff. The Team Leader will provide the direction and support necessary to provide a clean and safe environment for all staff, by performing various building cleaning services. **Responsibilities**: - Select, wear,...

  • Mechanical Designer Lead

    1 month ago

    Concord, Canada StackTeck Systems Ltd. Full time

    About StackTeck Systems Limited StackTeck, with over five decades of mold building innovation, is a leading source of high productivity tooling solutions for the injection molding industry. StackTeck supplies a wide range of injection molds and IML automation used to produce plastic parts in applications such as caps, closures, medical, PET preforms, and...

  • Plant Controller with Manufacturing Experience

    4 days ago

    Concord, Canada TYM Consulting Full time

    Job Description: We are seeking a highly skilled and experienced Plant Controller with expertise in manufacturing and cost analysis within the food industry. As a Plant Controller, you will play a vital role in ensuring financial accuracy, controlling costs, and driving profitability within our plant operations. **Responsibilities**: Perform detailed...

  • Mechanical Designer Lead

    2 weeks ago

    Concord, Canada StackTeck Systems Ltd. Full time

    About StackTeck Systems LimitedStackTeck, with over five decades of mold building innovation, is a leading source of high productivity tooling solutions for the injection molding industry. StackTeck supplies a wide range of injection molds and IML automation used to produce plastic parts in applications such as caps, closures, medical, PET preforms, and...

  • Production Team Leader

    6 days ago

    Concord, Canada Clover Tool Manufacturing Limited Full time

    **Location**: Concord, Ontario (close to Keele St. and Highway 7) **Shift available**: Day Shift (6:30pm-3:00pm) **Company Introduction** Clover Tool Manufacturing Limited is Canadian based and owned, privately held company. We specialize in automotive tooling, stampings and assemblies. We are capable of running a number of diverse projects. Today, Clover...

  • Production Team Leader

    4 days ago

    Concord, Canada Clover Tool Manufacturing Limited Full time

    **Location**: Concord, Ontario (close to Keele St. and Highway 7) **Company Introduction** Clover Tool Manufacturing Limited is Canadian based and owned, privately held company. We specialize in automotive tooling, stampings and assemblies. We are capable of running a number of diverse projects. Today, Clover Tool operates in over a 175,000 square foot...

  • Mechanical Designer Lead

    1 month ago

    Concord, Canada StackTeck Systems Ltd. Full time

    About StackTeck Systems LimitedStackTeck, with over five decades of mold building innovation, is a leading source of high productivity tooling solutions for the injection molding industry. StackTeck supplies a wide range of injection molds and IML automation used to produce plastic parts in applications such as caps, closures, medical, PET preforms, and...

  • Mechanical Designer Lead

    1 month ago

    Concord, Canada StackTeck Systems Ltd. Full time

    About StackTeck Systems Limited StackTeck, with over five decades of mold building innovation, is a leading source of high productivity tooling solutions for the injection molding industry. StackTeck supplies a wide range of injection molds and IML automation used to produce plastic parts in applications such as caps, closures, medical, PET preforms, and...

  • Mechanical Designer Lead

    1 month ago

    Concord, Canada StackTeck Systems Ltd. Full time

    About StackTeck Systems LimitedStackTeck, with over five decades of mold building innovation, is a leading source of high productivity tooling solutions for the injection molding industry. StackTeck supplies a wide range of injection molds and IML automation used to produce plastic parts in applications such as caps, closures, medical, PET preforms, and...

  • Purchase Order Processing Representative

    1 month ago

    Concord, Canada CRH Canada Full time

    Job ID: 495110 Work Type: Contract **It is a great time to join the CRH Canada team! CRH Canada is going through an exciting business transformation which demands first-class Talent Management support to drive results.** **We are building a world - class team. Make your mark!** **You will be a successful addition to our team if you look at change as an...