Fabrication Machine Cleaner

5 months ago

Brampton, Canada Almag Aluminum Full time

**JOB DESCRIPTION**

Directly responsible to the Fabrication Manager. Functionally responsible to ensure a safe clean environment on all production equipment.

**MINIMUM QUALIFICATIONS**

**Education/Experience**
- Prior custodial-type experience is preferred but not essential.
- 1-2 years of experience in a manufacturing environment.
- Must have a good command of English, both written and oral.
- Good time management and organizational skills are necessary.

**Technical Skills/Competence**
- Must be able to work independently and with mínimal supervision.
- Must be able to effectively communicate/cooperate with production crews and supervisors in order to maximize job efficiency.
- Follow the cleaning schedule and tasks.
- Perform other duties as assigned by supervisor/manager.
- Lifting and bending may be required.
- May lift 35 - 50 lbs on a frequent basis.

**DUTIES AND RESPONSIBILITIES**

The duties and responsibilities of the Fabrication Machine Cleaner are detailed below, but not limited to the following:

- General clean-up of production machinery and surrounding areas. Specifically sweeping, vacuuming, removing butt/billets from under presses and painting of equipment as required.
- Monitor on a daily basis the condition/state of the equipment and related areas and address/clean as required.
- Report issues observed on equipment and surrounding areas to supervisor/manager.
- Operate saw to cut up scrap.
- Assist with sorting material when required.
- Assist production crews as a helper when required.
- Other duties as assigned.

Continuous Improvement is everyone’s responsibility in ALMAG’s high-performance culture. We not only value your input, we look to you to actively work to improve the processes you do, by eliminating waste (non-value add) and variation that results in customer dissatisfaction.

**HEALTH & SAFETY**

According to OHSA of Ontario, Section 28, Subsection (1) & (2): A worker shall;
- Work in compliance with the provisions of the Act and the regulations;
- Use or wear the equipment, protective devices or clothing that the worker's employer requires to be used or worn;
- Report to his or her employer or supervisor the absence of or defect in any equipment or protective device of which the worker is aware and which may endanger himself, herself or another worker;
- Report to his or her employer or supervisor any contravention of the Act or the regulations or the existence of any hazard of which he or she knows;
- Not remove or make ineffective any protective device;
- Not use or operate any equipment, machine, device or thing or work in a manner that may endanger himself, herself or any other worker; or
- Not engage in any prank, contest, feat of strength, unnecessary running, or rough and boisterous conduct;
- Observes Almag’s Health & Safety policies and procedures;
- Ensures work area is kept clean, orderly and safe at all times.

Accommodations for disabilities in relation to the job selection process are available upon request.

**Benefits**:

- Company events
- Dental care
- Employee assistance program
- Extended health care
- On-site parking
- Paid time off
- Profit sharing
- Tuition reimbursement
- Vision care
- Wellness program

Schedule:

- 8 hour shift
- Day shift
- Monday to Friday

Work Location: In person

  • Welding Machine Operator

    3 weeks ago

    Brampton, Ontario, Canada 3D LASER & FABRICATION INC. Full time

    Job SummaryWe are seeking a skilled Welding Machine Operator to join our team at 3D LASER & FABRICATION INC. The successful candidate will be responsible for operating manual or semi-automatic welding equipment, reading and interpreting welding blueprints, and ensuring that welds meet standards and specifications.Key ResponsibilitiesOperate manual or...

  • Welding Machine Operator

    2 weeks ago

    Brampton, Ontario, Canada 3D LASER & FABRICATION INC. Full time

    Job Summary: We are seeking a skilled Welding Machine Operator to join our team at 3D LASER & FABRICATION INC. As a key member of our fabrication department, you will be responsible for operating manual or semi-automatic welding equipment to fabricate or repair metal parts and products.Key Responsibilities:Interpret welding process specifications and ensure...

  • Welding Machine Operator

    2 weeks ago

    Brampton, Ontario, Canada 3D LASER & FABRICATION INC. Full time

    Job Summary: We are seeking a skilled Welding Machine Operator to join our team at 3D LASER & FABRICATION INC. The successful candidate will be responsible for operating manual or semi-automatic welding equipment, reading and interpreting welding blueprints, and ensuring that welds meet standards and specifications.Key Responsibilities:Operate manual or...

  • Welding Machine Operator

    3 weeks ago

    Brampton, Ontario, Canada 3D LASER & FABRICATION INC. Full time

    Job Summary: We are seeking a skilled Welding Machine Operator to join our team at 3D LASER & FABRICATION INC. The successful candidate will be responsible for operating manual or semi-automatic welding equipment, reading and interpreting welding blueprints, and ensuring that welds meet standards and specifications.Key Responsibilities:Operate manual or...

  • Welding Fabricator

    1 month ago

    Brampton, Ontario, Canada HSG Welding & Fabrication Full time

    Job Title: WelderWe are seeking a skilled Welder to join our team at HSG Welding & Fabrication. As a Welder, you will be responsible for fabricating and repairing metal parts and products using various welding techniques.Key Responsibilities:Interpret welding process specifications and operate manual or semi-automatic, fully automated welding...

  • Welding Fabricator

    1 month ago

    Brampton, Ontario, Canada HSG Welding & Fabrication Full time

    Job Title: WelderWe are seeking a skilled Welder to join our team at HSG Welding & Fabrication. As a Welder, you will be responsible for fabricating and repairing metal parts and products using various welding techniques.Key Responsibilities:Interpret welding process specifications and operate manual or semi-automatic, fully automated welding...

  • Welding Machine Operator

    3 weeks ago

    Brampton, Ontario, Canada 3D LASER & FABRICATION INC. Full time

    Job SummaryWe are seeking a skilled Welding Machine Operator to join our team at 3D LASER & FABRICATION INC. The successful candidate will be responsible for operating manual and semi-automatic welding equipment, as well as computer-aided design (CAD) software.Key ResponsibilitiesOperate manual and semi-automatic welding equipment to fabricate and repair...

  • Welding Machine Operator

    3 weeks ago

    Brampton, Ontario, Canada 3D LASER & FABRICATION INC. Full time

    We are seeking a skilled Welding Machine Operator to join our team at 3D LASER & FABRICATION INC. The ideal candidate will have experience operating manual or semi-automatic welding equipment and be able to interpret welding process specifications.Key Responsibilities:Operate manual or semi-automatic welding equipment to fabricate or repair metal parts and...

  • Fabricator - Metal Fabrication Specialist

    4 weeks ago

    Brampton, Ontario, Canada J&T MACHINE KNIFE INC Full time

    Job SummaryWe are seeking a skilled Fabricator to join our team at J&T MACHINE KNIFE INC. As a Fabricator, you will be responsible for fabricating metal structures and components using various metalworking machines and tools.Key ResponsibilitiesLay out reference points and patterns for metal fabrication projectsAssemble and fit plates and sections to form...

  • Welding Fabricator

    3 weeks ago

    Brampton, Ontario, Canada MSS MACHINING & FABRICATION INC. Full time

    Job SummaryMSS MACHINING & FABRICATION INC. is seeking a skilled Welding Fabricator to join our team. As a Welding Fabricator, you will be responsible for interpreting welding process specifications, operating manual or semi-automatic welding equipment, and reading and interpreting welding blueprints and drawings.Key ResponsibilitiesInterpret welding process...

  • Welder - Fabrication Specialist

    3 weeks ago

    Brampton, Ontario, Canada HSG Welding & Fabrication Full time

    Job SummaryWe are seeking a skilled Welder - Fabrication Specialist to join our team at HSG Welding & Fabrication. The successful candidate will be responsible for interpreting welding process specifications, operating manual or semi-automatic welding equipment, and maintaining and performing minor repairs on welding, brazing, and soldering equipment.Key...

  • Welding Fabricator

    2 weeks ago

    Brampton, Ontario, Canada KENT METAL FABRICATION LTD. Full time

    Job SummaryKENT METAL FABRICATION LTD. is seeking a skilled Welding Fabricator to join our team. As a Welding Fabricator, you will be responsible for fabricating and repairing metal parts and products using various welding techniques.Key ResponsibilitiesFabricate and repair metal parts and products using various welding techniques, including oxy-acetylene...

  • Welding Fabricator

    2 months ago

    Brampton, Ontario, Canada HSG Welding & Fabrication Full time

    Job Title: Welding FabricatorWe are seeking a skilled Welding Fabricator to join our team at HSG Welding & Fabrication. As a Welding Fabricator, you will be responsible for fabricating and repairing metal parts and products using various welding techniques.Key Responsibilities:Interpret welding process specifications and operate manual or semi-automatic,...

  • Welding Fabricator

    2 months ago

    Brampton, Ontario, Canada HSG Welding & Fabrication Full time

    Job Title: Welding FabricatorWe are seeking a skilled Welding Fabricator to join our team at HSG Welding & Fabrication. As a Welding Fabricator, you will be responsible for fabricating and repairing metal parts and products using various welding techniques.Key Responsibilities:Interpret welding process specifications and operate manual or semi-automatic,...

  • Fabricator - Metal

    4 weeks ago

    Brampton, Ontario, Canada J&T MACHINE KNIFE INC Full time

    Job Title: Fabricator - MetalWe are seeking a skilled Fabricator - Metal to join our team at J&T MACHINE KNIFE INC. As a Fabricator - Metal, you will be responsible for assembling and fitting metal parts to form structures, laying out reference points and patterns, and operating heavy-duty metal-working machines.Key Responsibilities:Lay out reference points...

  • Fabricator - Metal

    4 weeks ago

    Brampton, Ontario, Canada J&T MACHINE KNIFE INC Full time

    Job Title: Fabricator - MetalWe are seeking a skilled Fabricator - Metal to join our team at J&T MACHINE KNIFE INC. As a Fabricator - Metal, you will be responsible for assembling and fitting metal parts to form structures, laying out reference points and patterns, and operating heavy-duty metal-working machines.Key Responsibilities:Lay out reference points...

  • Fabricator - Metal Fabrication Specialist

    3 weeks ago

    Brampton, Ontario, Canada J&T MACHINE KNIFE INC Full time

    Job SummaryWe are seeking a skilled Fabricator to join our team at J&T MACHINE KNIFE INC. As a Fabricator, you will be responsible for laying out reference points and patterns, assembling and fitting plates and sections to form structures, and welding or bolting sections together.Key ResponsibilitiesLay out reference points and patternsAssemble and fit...

  • Fabricator - Metal Fabrication Specialist

    3 weeks ago

    Brampton, Ontario, Canada J&T MACHINE KNIFE INC Full time

    Job SummaryWe are seeking a skilled Fabricator to join our team at J&T MACHINE KNIFE INC. As a Fabricator, you will be responsible for laying out reference points and patterns, assembling and fitting plates and sections to form structures, and welding or bolting sections together.Key ResponsibilitiesLay out reference points and patternsAssemble and fit...

  • Fabricator - Metal Fabrication Specialist

    3 weeks ago

    Brampton, Ontario, Canada J&T MACHINE KNIFE INC Full time

    Job SummaryWe are seeking a skilled Fabricator to join our team at J&T MACHINE KNIFE INC. As a Fabricator, you will be responsible for laying out reference points and patterns, assembling and fitting plates and sections to form structures, and welding or bolting sections together.Key ResponsibilitiesLay out reference points and patternsAssemble and fit...

  • Welding Fabricator

    4 weeks ago

    Brampton, Ontario, Canada 3D LASER & FABRICATION INC. Full time

    Job Title: WelderJoin 3D LASER & FABRICATION INC. as a skilled Welder to play a crucial role in our metal fabrication team. As a Welder, you will be responsible for operating manual or semi-automatic welding equipment to fabricate or repair metal parts and products.Key Responsibilities:Interpret welding process specifications and ensure that welds meet...