Machine Operator

6 months ago

Ingersoll, Canada Nortera Foods Inc. Full time

**A. General Functions/Specific Responsibilities**:
This person is expected to fulfill the following key functions and responsibilities:

- Responsible for line preparation; setup scale and bagger to the proper program, prepare the poly and cases for the specified customer and product type, setup the case erector, case packer, case check weigher, and robot;
- Responsible to ensure the line runs efficiently;
- Make necessary adjustments to program settings or manual settings;
- Responsible for the integrity of the finished product, proper product being used, proper bag weights being met, bag seals and codes are correct, case codes are correct;
- Responsible for performing routine weight checks, code checks, seal checks, and case code checks;
- Responsible for ensuring product runs and is completed as detailed on the packaging daily schedule;
- Responsible to ensure roll changes, changeovers, and washouts are efficient;
- Responsible for ensuring the line does not shut down early for breaks, or shift end;
- Responsible for documenting all changes made to programming, manual settings, also responsible for documenting any difficulties, downtime, and line times;
- Responsible for other documentation, poly usage, and quantity of cases ran,
- Responsible for communication with all employees on the line, lift truck drivers, QA, and supervisors;
- Assisting with washouts-disassembling and reassembling where needed
- General housekeeping-keeping work area clean and tidy
- Must work in compliance with established Hazard Analysis & Critical Control Points (HACCP), Food Safety and Good Manufacturing Practices (GMPs) protocols and report any concerns to your supervisor;
- Other duties as assigned.

**Third Operator**:

- Responsible for communicating with shift operators, to stage poly to ensure more efficient changeovers and to allow operators to monitor lines consistently;
- During non-break periods, responsible for downstream events focusing on robot, tape machines, case packers, and case erectors for both Line 3 and 6;
- Support cross-training initiatives;
- Support line changeovers for both Line 3 & 6;
- Cover other positions as needed, depending on skill and ability;
- Assist in gathering materials (e.g. poly, peel & seal, tape);
- Assist with calibration of scale system where needed;
- Support Total Preventative Maintenance (TPM) program;
- Identify continuous improvement opportunities and assist in improvements when able.

**B. Personal Contribution**:
By performing these functions and fulfilling these responsibilities, this person will contribute to the Mission of the organization/Central Purpose of the department:

- Minimize downtime, increase maximum output of products;
- Minimize customer concern of product(s) integrity;
- Enhance capacity of equipment, thereby improving efficiencies;
- Minimize the likelihood of lost time accidents by ensuring safe equipment;
- A mutual respect among employees of the organization;
- A commitment to team spirit and shared corporate values.

**C. Entry Level Criteria**
- Must have strong attention to detail;
- Must have the ability to troubleshoot production line issues;
- Must be organized and able to multitask;
- Ability to self-motivate;
- Good written and verbal communication skills;
- Strong comprehension of Good Manufacturing Practices and Hazard Analysis & Critical Control Points.

**D. Success Criteria**
- Strong mechanical aptitude;
- Customer, product, and contract knowledge;
- Procedure and specification knowledge;
- Strong communication skills.

**Salary**: From $26.03 per hour

**Benefits**:

- Casual dress
- Company pension
- Dental care
- Disability insurance
- Employee assistance program
- Extended health care
- Life insurance
- On-site parking
- Tuition reimbursement
- Wellness program

Schedule:

- 8 hour shift
- Day shift
- Evening shift
- Monday to Friday
- Night shift
- Overtime

Supplemental pay types:

- Overtime pay

Ability to commute/relocate:

- Ingersoll, ON: reliably commute or plan to relocate before starting work (required)

**Experience**:

- Machine Operator: 1 year (preferred)

Work Location: In person

  • Machine Operator

    5 months ago

    Ingersoll, Canada IMT CORPORATION Full time

    **_MACHINE OPERATOR/PRODUCTION ASSOCIATE_** **IMT Precision** is one of Canada's leading major manufacturers in the OEM and Defence industries. **Over 100 years** of experience has taught us that our employees are our most valuable asset. We offer many perks along with a stable career at **IMT Precision**. **_ Job Summary:_** Our Machine Operators are an...

  • Machine Operator

    6 months ago

    Ingersoll, Canada Nortera Foods Inc. Full time

    **A. General Functions/Specific Responsibilities**: This person is expected to fulfill the following key functions and responsibilities: - Responsible for line preparation; setup scale and bagger to the proper program, prepare the poly and cases for the specified customer and product type, setup the case erector, case packer, case check weigher, and...

  • Machine Operator

    3 days ago

    Ingersoll, Ontario, Canada About IMT Precision Full time

    Role OverviewIn this exciting opportunity, you will be a key contributor to our manufacturing operations, ensuring the production of high-quality parts. Reporting to the Production Supervisor, your primary responsibilities will include operating machinery, maintaining attention to detail, and troubleshooting equipment.About the RoleOperate various machines...

  • General Labourer/machine Operator

    6 months ago

    Ingersoll, Canada Ingersoll Paper Box Full time

    **Position Summary** Primarily responsible for providing general labour support within the finishing department by preparing the product for gluing, feeding the gluing line and packing finished products preparing for shipping. **Primary Responsibilities** - Hand Stripping_ - Remove waste board from boxes by hand, with a hammer or using the air gun as...

  • Production Line Operator/ Machine Operator

    3 months ago

    Ingersoll, Canada Tillsonburg Custom Foods Full time

    **About us** Tillsonburg Custom Foods is a federally inspected, Halal accredited, HAACP plant with over 30,000 square feet of the latest and most innovative machinery in the poultry industry. We specialize in poultry products, however, we are also licensed to formulate, blend and process beef and pork for specific customer projects. We pride ourselves on...

  • machine operator

    2 months ago

    Ingersoll, Canada Scout Talent Inc Full time

    Education: Expérience: EducationSecondary (high) school graduation certificateExperienceWill trainHealth benefitsDental planHealth care planFinancial benefitsBonusNight shift premiumPension planOther benefitsLearning/training paid by employerOther benefitsTeam building opportunitiesDurée de l'emploi: PermanentLangue de travail: AnglaisHeures de travail: 40...

  • machine operator

    2 months ago

    Ingersoll, Canada Scout Talent Inc Full time

    Education: Secondary (high) school graduation certificateExperience: Will trainHealth benefitsDental planHealth care planFinancial benefitsBonusNight shift premiumPension planOther benefitsLearning/training paid by employerOther benefitsTeam building opportunitiesWork Term: PermanentWork Language: EnglishHours: 40 hours per week

  • Die Cutter Operator

    6 months ago

    Ingersoll, Canada Ingersoll Paper Box Co. Limited Full time

    Position Summary The Die Cut operator is responsible for the safe operation of the die-cutting machines. To ensure that the cutting machine efficiently cuts the product as per the specifications and performs routine maintenance on the equipment. Primary Responsibilities are, but not limited to: - Tear down and set up jobs to be run - Instruct feeder when...

  • Production Line Operator/ Production Technician

    6 months ago

    Ingersoll, Canada Tillsonburg Custom Foods Full time

    **About us** Tillsonburg Custom Foods is a federally inspected, Halal accredited, HAACP plant with over 30,000 square feet of the latest and most innovative machinery in the poultry industry. We specialize in poultry products, however, we are also licensed to formulate, blend and process beef and pork for specific customer projects. We pride ourselves on...

  • Production Line Operator/ Production Technician

    6 months ago

    Ingersoll, Canada Tillsonburg Custom Foods Full time

    **About us** Tillsonburg Custom Foods is a federally inspected, Halal accredited, HAACP plant with over 30,000 square feet of the latest and most innovative machinery in the poultry industry. We specialize in poultry products, however, we are also licensed to formulate, blend and process beef and pork for specific customer projects. We pride ourselves on...

  • Senior Maintenance Operations Manager

    6 days ago

    Ingersoll, Ontario, Canada Revel IT Full time

    Job SummaryWe are seeking a highly skilled Senior Maintenance Operations Manager to join our team at Revel IT. This is a 12-month contract position in Ingersoll, Ontario, with a rate flexible depending on your experience.About the RoleThe successful candidate will be responsible for establishing, implementing, and maintaining long-range plans for improvement...

  • CNC (Computer Numerical Control) Machinist

    6 months ago

    Ingersoll, Canada Hydra Dyne Technology Full time

    Work Term: Permanent - Work Language: English - Hours: 44 hours per week - Education: Secondary (high) school graduation certificate - Experience: Experience an asset **Work setting**: - Relocation costs not covered by employer - General manufacturing **Tasks**: - Set up and adjust production machineries/tools - Maintain inspection records and complete...

  • CNC Machinist Level 3

    6 months ago

    Ingersoll, Canada HYDRA DYNE TECHNOLOGY INC Full time

    About Us Hydra Dyne Tech designs and manufactures custom hydraulic products. We produce some of the world’s most reliable rotary unions, hydraulic cylinders and manifold blocks. Our clients include leading OEMs globally. Our state-of-the-art manufacturing facility is equipped with both specialized equipment and general computer numerical controlled...

  • Packaging Line Operator

    6 months ago

    Ingersoll, Canada Nortera Foods Inc. Full time

    **A. General Functions/Specific Responsibilities**: This person is expected to fulfill the following key functions and responsibilities: - Responsible for line preparation; setup scale and bagger to the proper program, prepare the poly and cases for the specified customer and product type, setup the case erector, case packer, case check weigher, and...

  • Quality Assurance Technician Level 1

    6 months ago

    Ingersoll, Canada HYDRA DYNE TECHNOLOGY INC Full time

    **Purpose of Job**: The Quality Assurance Technician Level 1 is responsible for maintaining quality-assurance processes, inspecting products, recording measurements and communicating findings. **Principal Accountabilities**: - Measure machined parts on the CMM - Complete Incoming Inspections for supplied parts and document appropriately - Measure machined...

  • Quality Assurance Technican

    6 months ago

    Ingersoll, Canada HYDRA DYNE TECHNOLOGY INC Full time

    **1. Organization** - Refer to Organization Chart **2. Purpose of Job**: - The Quality Assurance Technician is responsible for maintaining quality-assurance processes, calibrations, inspecting products, recording measurements and communicating findings. **3. Principal Accountabilities**: - Measure machined parts on the CMM - Complete Incoming Inspections...

  • Maintenance Operations Manager

    4 weeks ago

    Ingersoll, Ontario, Canada CIeNET International Full time

    About CIeNET InternationalCIeNET International is a world-leading provider of software services and solutions, with a strong presence in North America, Asia, and Europe. Our company has over 2,400 employees worldwide, supporting customers across various industries.We are expanding our operations in Canada to better serve our industry-leading customers in the...

  • Robotic Weld Cell Operator Level 1

    6 months ago

    Ingersoll, Canada HYDRA DYNE TECHNOLOGY INC Full time

    Hydra Dyne Tech designs and manufactures custom hydraulic products. We produce some of the world’s most reliable rotary unions, hydraulic cylinders and manifold blocks. Our clients include leading OEMs globally. Our state-of-the-art manufacturing facility is equipped with both specialized equipment and general computer numerical controlled machines. Our...

  • Maintenance Manager

    6 months ago

    Ingersoll, Canada Marwood International Inc. Full time

    **Maintenance Manager** Location: Ingersoll, ON **Why Join Marwood?** **_ Who we are_**: - Marwood International Inc. is a full service, **award-winning**, Tier I and 2 automotive OEM structural components and modular assembly supplier, that focuses on waste elimination and light-weighting initiatives from prototypes to full volume products to end of...

  • Maintenance Manager

    6 months ago

    Ingersoll, Canada Marwood International Inc. Full time

    **Maintenance Manager** Location: Ingersoll, ON **Why Join Marwood?** **_ Who we are_**: - Marwood International Inc. is a full service, **award-winning**, Tier I and 2 automotive OEM structural components and modular assembly supplier, that focuses on waste elimination and light-weighting initiatives from prototypes to full volume products to end of...