QA/qc Welding Inspector
3 weeks ago
**About us**
Turnkey Modular Systems Inc. (TKMS) is a custom fabricator with an in-house team of professionals dedicated to the engineering, design, fabrication and delivery of Integrated Process Modular Systems.
Our services include Preliminary and Detailed Process Design, 3-D Modeling, Modular Construction, Factory Acceptance Testing (FAT), Installation, Start-Up and Commissioning.
TKMS is globally recognized for our unique expertise in the Design and Modular Construction of Custom-Designed **Built to Order** Process Systems and Modules specifically for the Biotech and Pharmaceutical Industries.
***:
This full time position is responsible for examination and testing of parts before, during and after fabrication per quality standards of TKMS, ensuring that all required inspections are performed, accepted and signed off before the next step of fabrication proceeds.
4 Day Week Schedule
**Duties and Responsibilities**
Read blue prints and specifications.
Perform visual welding inspection on all high purity piping and pressure piping per ASME BPE guidelines and ASME B31.3 respectively and/or client specification.
Verify the coupons prepared by the welders for non-accessible welds and generate Weld Coupon Log.
Verify the provided welds for spools have the following condition:
a. Welds wire brushed clean.
b. Welder ID number vibro-etched beside weld.
c. Date of weld vibro-etched beside weld.
d. Spool ID vibro-etched on spool.
e. Material Heat numbers vibro-etched on each piece
Record each weld on Weld Log and Weld Map documents.
Ensure welders and pipefitters are following the Welding Procedure Specifications (WPS).
Measure products with rulers, calipers, micrometers, or gauges.
Perform borescope inspection, evaluate, and determine if defects are acceptable or not based on ASME Code and Client requirements.
Perform dimensional, confirm orientations, verify material grade / spec and heat numbers, and visual welding inspection on frames, skids and structural steel per manufacturer’s drawings and approved code and standards.
Inform welders and fitters when defects are found.
Check and control the NDE requirements for the project (% of inspections).
**QUALIFICATIONS**:
- Minimum of 2 years of experience in a manufacturing or production environment as welding inspector.
- **Valid CWB Level II Welding Inspector Certification or SNT-TC-1A Visual Testing Level II certificate.**
- Understands standard quality metrics, Mean Time Between Failure (MTBF) calculations, Definitions of Done (DoD) quality requirements, and Good Documentation Practices (GDP).
- Effective problem solving, root cause analytical skills.
- Knowledge about welding discontinuities.
- Demonstrates strong written and verbal communications skills.
**Salary**: $28.00-$32.00 per hour
Expected hours: 40 per week
**Benefits**:
- Company events
- Dental care
- Disability insurance
- Employee assistance program
- Extended health care
- Life insurance
- On-site parking
- Paid time off
- RRSP match
- Vision care
Schedule:
- 10 hour shift
- Day shift
Supplemental pay types:
- Overtime pay
Ability to commute/relocate:
- Oakville, ON L6J 7R2: reliably commute or plan to relocate before starting work (required)
**Education**:
- AEC / DEP or Skilled Trade Certificate (preferred)
Licence/Certification:
- Certified Welding Inspector (required)
Work Location: In person
Application deadline: 2024-03-10
Expected start date: 2024-03-18
-
Quality Control Inspector
1 month ago
Oakville, Canada Zeton Inc. Full timeAs the world leader in the design and fabrication of lab scale systems, pilot plants, demonstration plants and modular production plants, Zeton offers challenging and rewarding career opportunities, competitive employment conditions, recognition and a dynamic, autonomous work environment for talented individuals looking to join a world-class team. As part...
-
QC Inspector
1 month ago
Oakville, ON, Canada Trans-United Consultants Ltd. Full timeEngineering,Technical, Skilled Trades, Management & Computer positions Submit your resume in MS Word format. If you know of someone who may be interested in this position, please email the job description. • Quality Control Inspector for ASME Pressure Vessels and Equipment;General Duties: Have responsibility for inspection of materials, and...
-
Quality Control Inspector
2 days ago
Oakville, Canada GVA Lighting Inc. Full timeWe are looking for a **Quality Control (QC) Inspector** to join our team and strive to ensure that all GVA products meet our high-quality standards and specifications. Reporting to the QA Supervisor, you will frequently communicate feedback and suggestions to create an environment of continuous and focused improvement. - GVA Lighting creates outstanding...
-
Inspector - Quality Control
1 month ago
Oakville, ON, Canada Trans-United Consultants Ltd. Full timeEngineering,Technical, Skilled Trades, Management & Computer positions Quality Control Inspector for ASME Pressure Vessels and Equipment;Have responsibility for inspection of materials, and workmanship within the shop and at sublet vendors for conformance to quality standards, specifications, and dimensional requirements. Have responsibility for...
-
QA / QC Supervisor, Heavy Steel Fabrication
1 month ago
Oakville, ON, Canada Trans-United Consultants Ltd. Full timeEngineering,Technical, Skilled Trades, Management & Computer positions Submit your resume in MS Word format. If you know of someone who may be interested in this position, please email the job description. • Position QA / QC Supervisor, Heavy Steel Fabrication Job Type Permanent Education Quality Engineer - Experience in ASME Codes/Standards...
-
Quality Assurance
4 weeks ago
Oakville, Canada Coordinate Industries Ltd. Full timeThe Junior Quality Assurance Inspector evaluates/Creates documentation, performs Inspection procedures, inspects products, measures process performance, records data, and prepares reports such as First Article Inspection Reports etc. **1- Job Related Duties & Responsibilities** - Primary responsibility for safety in all areas of the assigned duties, to...
-
Quality Assurance
4 weeks ago
Oakville, Canada Procor Full time**Quality Assurance (QA) Manager - Oakville, Ontario** Procor Limited manages Canada’s largest private tank car lease fleet and operates an extensive repair network across the country. Our fleet has grown to include more than 30,500 special purpose tank and freight cars. Procor also operates 27 repair locations servicing the petroleum, petrochemicals,...
-
Seasonal - Utility Person 1 - Playgrounds
4 weeks ago
Oakville, Canada Town of Oakville Full timeJob Responsibilities : Performs routine maintenance procedures on existing park and cemetery facilities, and installation of new development projects, i.e. playgrounds, spray pads, steps, bridges, backstops, benches, signage, interlocking stone; Provides direction to other members of the work crew, while working with the crew in the accomplishment of...
-
Quality Assurance Technician
1 month ago
Oakville, Canada Taima Extracts Inc. Full time**Position Title** **QA/QC Technician** Job Responsibility **Description** Quality Assurance Technician shall ensure that the Quality Management System of the licensed manufacturing site is implemented and monitored as per procedure. Furthermore, the position requires to be vigilant in regulations and efficient at implementing regulatory requirements in...
-
Welder Supervisor- Oakville
4 weeks ago
Oakville, Canada AppleOne Full timeWelder Supervisor $70k - $85K Location in Oakville Perks: Day shift- Mon to Thur- 7am to 4pm & Fri - 7am to 1pm. Duties: Read basic blueprints Experience in production scheduling - delegating task to employees, forecasting In co-ordination with Day-shift Production, organize, direct, and supervise Afternoon-shift shop activities in the interest of...
-
-Deputy Quality Manager
5 days ago
Oakville, Canada Kiewit Full timePosition Overview Located at the project location, the Project Quality Manager (PQM) is responsible for the development, implementation, and management of a contract-specific Project Quality Plan (PQP) and all other quality related functions necessary to deliver the project fully compliant with the contract documents. The PQM is a member of the project...
-
Production Configuration Technician
3 days ago
Oakville, Canada Media Resources Inc. Full timeSchedule: Monday to Thursday (Day Shift)Hours of Work: 7:00 a.m. to 5:30 p.m.Location: Cornwall Road, Oakville, ONSummary:As a Production Configuration Technician, you will assist the organization to scale up our discrete manufacturing team. You will be focusing on the assembly and testing of electronic displays in our growing manufacturing area; ensuring...
-
Production Configuration Technician
3 days ago
Oakville, Canada Media Resources Inc. Full timeSchedule: Monday to Thursday (Day Shift)Hours of Work: 7:00 a.m. to 5:30 p.m.Location: Cornwall Road, Oakville, ONSummary:As a Production Configuration Technician, you will assist the organization to scale up our discrete manufacturing team. You will be focusing on the assembly and testing of electronic displays in our growing manufacturing area; ensuring...
-
Production Configuration Technician
3 days ago
Oakville, Canada Media Resources Inc. Full timeSchedule: Monday to Thursday (Day Shift)Hours of Work: 7:00 a.m. to 5:30 p.m.Location: Cornwall Road, Oakville, ONSummary:As a Production Configuration Technician, you will assist the organization to scale up our discrete manufacturing team. You will be focusing on the assembly and testing of electronic displays in our growing manufacturing area; ensuring...
-
Production Configuration Technician
7 hours ago
Oakville, Canada Media Resources] Full timeJob Description:Job Description Position Details: · Full-time. Permanent · Hourly · On-Site · Schedule: Monday to Thursday (Day Shift) · Hours of Work: 7:00 a.m. to 5:30 p.m. · NOC Code: 22302 – Industrial engineering and manufacturing technologists and technicians Location: Cornwall Road, Oakville, ON Summary: As a Production Configuration...
-
Production Configuration Technician
2 days ago
Oakville, ON, Canada Media Resources Inc. Full timeSchedule: Monday to Thursday (Day Shift) Hours of Work: 7:00 a.m. to 5:30 p.m. L ocation: Cornwall Road, Oakville, ON Su mm ar y : As a Production Configuration Technician , you will assist the organization to scale up our discrete manufacturing team. You will be focusing on the assembly and testing of electronic displays in our growing...