Machine Operator

2 months ago

Mississauga, Canada AMMEGA Full time

**Machine Operator - Coater - PTFE**

**Duties and Responsibilities**:

- Responsibilities will include, but may not be limited, to the following duties outlined below: _
- Study the Product Run Log Sheet to identify all the production specifications
- Safely operate start up & shut down of the machine, visually verify the settings to ensure constant speed and smooth running of the machine
- Ensure that the Adhesive Coating machine is cleaned, oiled, lubricated and greased as per schedule
- Consult manufacturer's manuals such as internal SOP (product setup forms) and blueprints to manufacture specific product requirements
- Measuring and controlling flow, level, pressure, temperature, tension, chemical composition and other variables in manufacturing and processing using tools like temperature controller
- Inspect and test operation of instruments and systems to diagnose faults by using micrometers and pressure relief instruments
- Using pneumatic, electrical and electronic testing devices like feeler gauges, micrometers and precision measuring instruments to measure and maintain the thickness of material
- Repair and adjust system components, such as adjusting break tensions, speed control and remove defective parts daily
- Perform scheduled biweekly preventive maintenance of oven, furnace, and complete test and maintenance reports
- Consult with and advise process operators such as chemical mixing operators and quality analysis personnel for compliance based on setup parameters
- Conduct shear test using shear testers
- Troubleshoot any creases, fold over or streak lines on material by correcting defects through adjusting speed and tension
- Immediately alert the maintenance team if any defect is observed or any anomaly is noticed on the machine
- Use forklift & industrial overhead crane to load the appropriate fabric roll on the machine
- Select the appropriate chemicals according to the specification sheet, make sure to collect the proper chemical drums from the designated storage area
- Respect the procedure for pre-mixing, safely mix the chemicals in the mixing room with the mixing machine, ensure that adequate quantity of adhesive is mixed and catalyzed prior to production run
- Use the manual stacker to load the drums and move them closer to the coating machine
- Make sure the liquid adhesive receptacle tray is clean, use specific solvent solution to clean tray
- Use the monitoring panel to measure temperatures, speed, air, and tension on the machine
- Fill the traceability documents and make sure all production tracking data are logged on the paper sheet
- Take the finished roll out of the machine, by using the forklift or the crane
- Use the forklift to place the roll in the designated storage racks & label the roll properly
- Respect the procedure for quality tests, take samples for testing, cooperate with QA team

**Knowledge and Skills Requirements**:

- Prior mechanical experience (machine operation, assembly, installation, etc.)
- Prior manufacturing experience - 2+ years optimal
- High school Diploma, GED, Technical/Trade School or equivalent experience
- Ability to read and comprehend shop orders and working drawings written in English
- Must be able to read and interpret measuring devices (tape measures, calipers, scales)
- Forklift certification would be an asset
- Ability to lift 50 lbs. & ability to stand for long periods of time
- Computer Proficiency - experience with data entry
- Flexible and adaptable to a changing environment
- Must be able to work for any employer in Canada

**Salary & Conditions**:

- Job location: Green Belting Industries, 381 Ambassador Drive, Mississauga, ON
- Salary: from 20 $ per hour to 21 $ per hour - depending on profile and experience
- Days of work: Monday to Friday - Permanent Full-time position, 40 hours per week
- Shift Timing: Afternoon shift (2.30 pm -11 pm)

**Benefits**:

- Paid Sick Days
- Employer Paid Comprehensive Group Benefit Plan - Life/AD&D/LTD/ Extended Health/Dental/Health Care Spending Account
- Group Pension Plan with Employer Match
- Employee and Family Assistance Program
- This position belongs to IRCC skill level B with NOC 2016 B code 2243 and NOC 2021 code 22312 TEER 2
- The hiring is open to all applicants able to work 40 hours per week.
- For the hiring you will need to provide valid photo ID, SIN number, banking details - Company will conduct criminal background check as part of onboarding

**ABOUT US**:
Green Belting Industries (Member of the Ammega Group) is a leader company in Teflon / PTFE product quality and service excellence for quality tapes and belts. Our core mission is to fully enable the most dedicated, knowledgeable and creative team in the industry so that we remain the leading innovator in PTFE.

We cultivate passion for R&D, internal talents, tradition of fabrication, and technical expertise to excel in management performance and operational efficiency in order to deliver enduring value to our customers.

Explo

  • CNC (computer numerically controlled) machining centre operator

    7 days ago

    Mississauga, Canada Garry Machine MFG. Full time

    Education: Secondary (high) school graduation certificateExperience: 1 to less than 7 monthsWork settingManufactureTasksOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Prepare etching solution and immerse metal parts or workpiece into...

  • CNC (computer numerically controlled) machining centre operator

    2 months ago

    Mississauga, Canada Garry Machine MFG. Full time

    Education: Secondary (high) school graduation certificateExperience: 1 to less than 7 monthsWork settingManufactureTasksOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Prepare etching solution and immerse metal parts or workpiece into...

  • CNC (computer numerically controlled) machining centre operator

    2 months ago

    Mississauga, Canada Garry Machine MFG. Full time

    Education: Expérience: EducationSecondary (high) school graduation certificateWork settingManufactureTasksOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Prepare etching solution and immerse metal parts or workpiece into the etching...

  • CNC (computer numerically controlled) machining centre operator

    1 week ago

    Mississauga, Canada Garry Machine MFG. Full time

    Education: Expérience: EducationSecondary (high) school graduation certificateWork settingManufactureTasksOperate and set up machines to perform repetitive machining operationsVerify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers)Prepare etching solution and immerse metal parts or workpiece into the etching...

  • CNC (Computer Numerically Controlled) Machining

    2 months ago

    Mississauga, Canada Garry Machine MFG. Full time

    Education: Secondary (high) school graduation certificate - Experience: 1 to less than 7 months **Work setting**: - Manufacture **Tasks**: - Read and interpret blueprints - Operate and set up machines to perform repetitive machining operations - Verify dimensions of parts machined using precise measuring instruments (e.g., micrometers, calipers) - Prepare...

  • Machine Operator

    4 days ago

    Mississauga, Canada Triple A Cheese Full time

    Triple A Cheese is looking to hire a Machine Operator for their afternoon shift. **Responsibilities**: - Responsible for the operation and maintenance of machines. - Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment. - Operate machines using hand and...

  • Machine Operator

    2 days ago

    Mississauga, Canada The Door Maker Full time

    The Machine Operator will be responsible for performing various tasks to set up, operate, monitor, troubleshoot and perform preventive maintenance on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. Sets up and...

  • Machine Operator

    1 month ago

    Mississauga, Canada The Door Maker Full time

    The Machine Operator will be responsible for performing various tasks to set up, operate, monitor, troubleshoot and perform preventive maintenance on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. Sets up and...

  • Machine Operator

    1 month ago

    Mississauga, Canada The Door Maker Full time

    The Machine Operator will be responsible for performing various tasks to set up, operate, monitor, troubleshoot and perform preventive maintenance on assigned machines. The Machine Operator will also be responsible for inspecting parts to specifications and making adjustments, or tool changes as necessary to maintain quality specifications. Sets up and...

  • Machine Operator

    2 months ago

    Mississauga, Canada Precision Concepts Canada - PPC division Full time

    PPC is currently recruiting for **Machine Operators** **for Night Shift 11pm-7am**. These positions are considered full-time permanent. POSITION FUNCTION: To operate plastic injection molding machines to produce quality parts. POSITION DESCRIPTION: - Receive verbal / written instructions from your supervisor and from the foreman - Responsible for packing...

  • Machine Operator

    1 week ago

    Mississauga, Canada Greenhouse Full time

    Salary: **Overview**: At Greenhouse, our mission is to offer widespread, sustainable access to plant-based nutrition and wellness of the highest quality. We believe that growth is always possible and our purpose is to give people catalytic ways to grow their healthiest lives through daily habits. Greenhouse is seeking a Machine Operator that will be...

  • Machine Operator

    7 days ago

    Mississauga, Canada SORSYS TECHNOLOGIES Full time

    **About us** SORSYS TECHNOLOGIES is in automated vision inspection solution and fully automated machining/assembly stations since 2016 serving North American industries **Responsibilities**: - Set up machines (calibration, cleaning etc.) to start a sorting cycle - Control and adjust machine settings as per instruction - Feed parts to semi-automated...

  • Machine Operator

    1 month ago

    Mississauga, Canada FAMTi Full time

    **Job Title **Machine Operator **Description** Operate Slitter rewinder machine, Doctoring rewinder machine, Rotogravure printing machine and related web control equipment after due training and under the direction of Manufacturing Manager/Shift Manager. **Job duties** - Initially undergo training and get the Manufacturing Manager’s written...

  • Machine Operator

    8 hours ago

    Mississauga, Canada Greenhouse Full time

    **Overview**:The Machine Operator will be carrying out activities to make our juices and Plant Based milks. The Machine Operator will operate and maintain various equipment used in the production of juice/milk products, ensuring that they are functioning efficiently and producing high-quality products. The Machine Operator will work in a fast-paced...

  • Machine Operator

    2 months ago

    Mississauga, Canada Star Force Inc. Full time

    _**Starforce is looking for Machine Operators (Temp to Perm) for their Client in Mississauga. We're looking for someone with at least 6 to 8 months of experience. The machine operator's responsibility is to operate the slitting machine, which includes all aspects of quality and safety.**_ - **Responsibility**:_ - To read and understand the schedule, layout...

  • Machine Operator

    4 days ago

    Mississauga, Canada MAD Elevator Inc Full time

    Machine Operator- We’re looking for like-minded individuals to join our team.- This is a Full-time, Hourly position.**About The Machine Operator**: As a Machine Operator, you will be responsible for ensuring material and finished pieces meet the quality requirements. Produce parts from drawings and reporting non-conformances and working to solve known...

  • Machine Operator

    1 week ago

    Mississauga, Canada The Crump Group Inc. Full time

    **Job Title** - Machine Operator **Department**: - Warehouse **Years of experience** - Minimum 1 year. **Position Type**: - Permanent (Afternoon Shift) **Job Overview** As Machine Operator (Afternoon shift), You would maintain equipment to ensure it operates safely and effectively. Your duties include preparing machinery for daily use, inspecting...

  • Machine Operator

    1 month ago

    Mississauga, Canada Media6 IMG Full time

    Company Name - Media6 IMG- Location - Mississauga- Job Type - Metal Fabrication- Employment type - Full-timeSchedule: Day or Afternoon Shift **Responsibilities**: - Plan and prepare jobs - Ability to read, analyze and interpret shop drawings - Fabrication and forming of mild steel and stainless steel - Machine set-up - Operate brake press and V-groove...

  • Machine Operator

    2 months ago

    Mississauga, Canada On-Time Human Resources Full time

    **Job Type**: Full Time **Location**: Mississauga **Job Title**: Machine Operator **Major Intersection**: Chedworth Way & Matheson Blvd W **Pay Rate**: $17/Hr **Working Days**: Monday - Friday **Shift Timings**: 07:00 AM - 03:30 PM (Morning) Must be comfortable with heavy lifting (White plastic Rolls) and will be assigned with assisting lead machine...

  • Machine Operator

    1 week ago

    Mississauga, Canada Flex Print & Pack Inc. Full time

    **Machine Operator** Flex Print & Pack Inc. is a leading global flexible packaging company with comprehensive product offerings. We are guided in our work by four core values that are the basis for our success: Integrity, Intensity, Innovation, and Involvement. We bring brand owners and packaging experts together to generate fresh thinking, accelerate...