Set-up /process Technician (Plastic Injection Mold

1 week ago

Greater Toronto Area, Canada Axiom Group Inc. Full time

**AFTERNOON SHIFT - 3:00 pm - 11:00 pm**

**Where does the **_**Process Setup Technician**_ **fit in?**

The Process Setup Technician will be responsible for the safe and efficient setup of molds and operation of variety of injection molding machines to ensure quality and safety.

**What you can expect as our next **_**Process Set-up Technician**_**:

- Proficiently start up, shutdown, setup and troubleshoot injection molding machines.
- Review production processes and maintain required documentation
- Prepare, setup and removal of production molds/tooling as per schedule.
- Inspect molds for correct set up and check to ensure proper materials are at the press prior to start. Confirm with material handler that material is prepared (dried if needed) and available
- Monitor productivity of the injection molding process and production scrap. Optimize process to increase efficiency, product quality and reduce scrap
- Communicate with prior and oncoming shifts about work assignments, production expectations and promote shift interaction and awareness
- Review production schedule and coordinate with Shift Lead hand on priorities
- Identify and communicate mold/machine problems to Shift Lead hand and Maintenance Dept.
- Work with maintenance to identify machine related issues and tool room to identify mold related issues
- Recommend, participate in and implement continuous improvement initiatives.
- Maintain a clean and safe work environment, understand 5S principles.
- Perform all job functions in a safe and healthful manner, abiding by all health and safety rules and regulations.
- Ensures compliance to IATF systems and procedures
- Perform additional tasks as assigned

**Do you have what is takes to be our next **_**Process Set-up Technician**_**?**
- 2 to 5 + years of strong Technical/ Process / Setup experiences in the plastic injection molding industry preferred.
- Familiar with Scientific Molding techniques and methodologies an asset.
- Have familiarity with resins such as - PP, Nylon, Glass filled, TPE, TPU, ABS and other engineered resins.
- Strong knowledge of mold hot runner controllers, sequential valve gate auxiliary equipment, dryers, thermolators, etc.
- Working knowledge on functionality of robot, sprue pickers, end of arm tooling. Be able to learn 6 axis Fanuc and gantry style robots
- High degree of mechanical aptitude, highly focused and driven to learn
- Strong attention to detail and pride in quality of work
- Must be able to access root causes and solution-based thinking
- Good visual skills for assessing part quality
- Good interpersonal skills with the ability to work in a team-oriented environment.
- Good verbal and written communication skills (able to read and write in English)
- Must be punctual, reliable and good work ethic.
- Working knowledge of the Occupational Health and Safety Act and good manufacturing practices
- Familiarity of machine tonnages from 40 tons to 2400 Ton an asset
- Be flexible to work afternoons and night shift, and able to work overtime when needed
- Fork lift license and crane certification required

**Perks?**

To name a few, we offer a clean facility, an amazing work environment/culture, ability to participate in multiple fun-filled company events and so much more Don't forget to ask us about our competitive total compensation package
- We, at Axiom Group Inc. are an equal opportunity employer. We are always looking for talented individuals who are motivated to meet and exceed their goals. We are proud of what we’ve been able to accomplish, and searching for new and talented additions to our team has always remained a priority._
- Axiom is committed to providing reasonable accommodation for people with disabilities. If you require an accommodation, we will work with you to meet your needs in all stages of the hiring process_

**Job Types**: Full-time, Permanent

**Salary**: $1.00 per hour

**Benefits**:

- Company events
- Dental care
- Extended health care
- Life insurance
- On-site parking
- Paid time off

Flexible Language Requirement:

- French not required

Schedule:

- 8 hour shift

Supplemental pay types:

- Bonus pay
- Overtime pay

Ability to commute/relocate:

- Greater Toronto Area, ON: reliably commute or plan to relocate before starting work (preferred)

**Experience**:

- injection mold process / set-up: 2 years (preferred)

Work Location: In person

  • Mold Maker

    4 days ago

    Greater Toronto Area, Canada Axiom Group Inc. Full time

    **OPPORTUNITY OPEN TO INTERNATIONAL CANDIDATES!!** **LMIA** Support Provided!!** **Do you have magical hands? Are you a tool/mold making Guru? If the answer is 'Yes', We need you!** **Where does the _Mold Maker_ fit in?** The Mold Maker will be responsible for making molds from concept to completion as well as has experience in troubleshooting and...

  • Mould Maker

    2 weeks ago

    Greater Toronto Area, Canada Axiom Group Inc. Full time

    **OPPORTUNITY OPEN TO INTERNATIONAL CANDIDATES!!** **LMIA** Support Provided!!** **Do you have magical hands? Are you a tool/mold making Guru? If the answer is 'Yes', We need you!** **Where does the _Mold Maker_ fit in?** The Mold Maker will be responsible for making molds from concept to completion as well as has experience in troubleshooting and...

  • Quality Technician

    2 days ago

    Toronto, Canada Markdom Plastic Products Full time

    Markdom International has a proven history of producing world-class custom injection-molded products for the automotive and consumer goods industries. We have the capability to produce an extensive variety of products with our state-of-the-art in-house injection mold design and build capabilities, coupled with the latest injection molding process...

  • Process Technician

    4 days ago

    Toronto, Canada IPEX Group of Companies Full time

    IPEX is one of the North American leading providers of advanced plastic piping systems. Our mission is to shape a better tomorrow by connecting people with water and energy. Does the idea of working in an innovative production facility appeal to you? If so, we currently have an exciting opportunity for a **Process Technician**! This role will be based out...

  • Tool Room

    20 hours ago

    Toronto, Canada Polytainers, Inc. Full time

    **Job Title**: Mold Technician **Department**: Molding **Supervisor**: Tool Room Manager **Shift**: Shift 3 (11:30pm to 7:30am) ***: Reporting to the Tool Room Manager, the Mold Technician is responsible for performing product changes, attending to mold issues during production, preparing molds for upcoming mold changes, performing work as defined by the...

  • Tool Room

    Found in: Talent CA C2 - 1 week ago

    Toronto, Canada Polytainers Full time

    POSITION SUMMARY: Reporting to the Tool Room Manager, the Mold Technician is responsible for performing product changes, attending to mold issues during production, preparing molds for upcoming mold changes, performing work as defined by the Mold PM Program and preparing molds for storage after removal from machine. The Mold Technician will also be...

  • Molding - Process Engineer

    Found in: Talent CA C2 - 1 week ago

    Toronto, Canada Polytainers Full time

    POSITION SUMMARY: Reporting to the Molding Manager, the Process Engineer is responsible to provide day-to-day technical process support leading to process capability and reliability on the Molding Shop Floor. The Process Engineer will identify and drive Continuous Improvement (CI) projects leading to Molding achieving or exceeding its performance...

  • Senior Process Development Engineer

    4 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation • Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish processes...

  • Senior Process Development Engineer

    4 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation• Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish processes...

  • Senior Process Development Engineer

    4 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation • Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish processes...

  • Senior Process Development Engineer

    4 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation • Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish processes...

  • Mold Technician Coop Student

    2 days ago

    Toronto, Canada Polytainers, Inc. Full time

    Mold Technician Co-Op **Position Profile**: Reporting to the Tool Room Manager, the Mold Technician Coop is responsible for performing product changes, attending to mold issues during production, preparing molds for upcoming mold changes, performing work as defined by the Mold PM Program and preparing molds for storage after removal from machine. The Mold...

  • Molding Maintenance

    Found in: Talent CA C2 - 1 week ago

    Toronto, Canada Polytainers Full time

    POSITION SUMMARY: Reporting to the Molding Maintenance Manager, the Maintenance Electrician is responsible for responding to breakdowns and for troubleshooting of injection molding machines, troubleshooting and maintaining auxiliary support equipment, performing preventative maintenance of molding machines and auxiliary support equipment, performing...

  • Senior Process Development Engineer

    Found in: Talent CA 2A C2 - 2 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation • Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish processes...

  • Senior Process Development Engineer

    Found in: Whatjobs CA C2 - 4 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation • Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish...

  • Senior Process Development Engineer

    Found in: Appcast CA C2 Glassdoor - 4 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation • Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish processes...

  • Senior Process Development Engineer

    Found in: Appcast CA A2 P - 4 days ago

    Toronto, Canada HERO Recruitment Full time

    Impact Through Innovation • Lead process development on development projects, working as part of the project team. • Development and installation of new manufacturing and process technologies to support product development and product transfers. • Apply new technologies and methodologies to optimize process design & performance. • Establish processes...

  • mould maker

    Found in: Talent CA 2 C2 - 1 week ago

    Toronto, Canada Ram Plastics Inc. Full time

    Education: Secondary (high) school graduation certificateExperience: 1 year to less than 2 years or equivalent experienceTasksCompute dimensions and tolerances and set up machine toolsInstruct apprenticesVerify machined parts for conformance to specifications using precision measuring instrumentsProgram CNC machine toolsRead and interpret blueprints, maps,...

  • mould maker

    Found in: Talent CA 2 C2 - 2 days ago

    Toronto, Canada Ram Plastics Inc. Full time

    Education: Expérience: EducationSecondary (high) school graduation certificate or equivalent experienceTasksCompute dimensions and tolerances and set up machine toolsInstruct apprenticesVerify machined parts for conformance to specifications using precision measuring instrumentsProgram CNC machine toolsRead and interpret blueprints, maps, drawings and...

  • Senior Process Development Engineer

    Found in: Adzuna CA C2 - 1 day ago

    Toronto, ON, C6A, Ontario, Canada HERO Recruitment Full time

    Impact Through Innovation• Lead process development on development projects, working as part of the project team.• Development and installation of new manufacturing and process technologies to support product development and product transfers.• Apply new technologies and methodologies to optimize process design & performance.• Establish processes...