Sheet Metal Fabricator

2 weeks ago

Saskatoon, Canada Black & McDonald Limited Full time

ABOUT THIS CAREER OPPORTUNITY

Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished products. You may also be required to set up fabricating machines and design custom templates. The position is located in Saskatoon, SK and will report directly to the Supervisor.

The successful candidate should be able to demonstrate a strong work ethic, willingness to learn, a great attitude, and a genuine passion for the trade. Sheetmetal Fabricators are required to be skilled in all manner of duct construction methods; comfortable with the use of common industry specific hand tools, power tools, and diagnostic tools; and adept at reading and interpreting technical literature. Day to day work may sometimes require long hours and lifting heavy loads.

B&M is committed continuous improvement and will endeavor to provide all training necessary to maintain the health and safety of our staff and support career development wherever possible.

Duties and responsibilities include but are not limited to the following:

  • Reading and interpreting engineering blueprints.
  • Constructing base templates if necessary.
  • Measuring and marking out cutting and bending lines.
  • Setting up metalwork machinery including rollers, drill presses, flame cutters, brakes, and shears.
  • Determine the appropriate welding equipment or method based on requirements.
  • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
  • Operate angle grinders to prepare the parts that must be welded.
  • Align components using calipers, rulers etc. and clamp pieces.
  • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
  • Performing quality checks on completed products.
  • Conforming with state and company safety regulations.
  • Completing job reports.

Competency Requirements

  • Communicates Effectively
  • Continuous Learning
  • Customer Focus
  • Problem Solving and Innovation
  • Values and Respects Others

Education Requirements

  • High school diploma or equivalent.
  • Registered apprentice or Red seal journey person ticket.

Work Experience & Skill Requirements

  • Relevant Industry Experience
  • AWS certification and advanced welding experience.
  • Proficiency with metal fabrication tools including shears, rollers, flame cutters, and drill presses.
  • Clean Class 5 SK Driver’s License and abstract
  • Excellent verbal and written communication skills
  • Ability to follow written and verbal instructions.
  • Ability to always maintain a professional demeanor with fellow employees, customers, and stakeholders.
  • Strong problem-solving skills.
  • Knowledge of basic computer skills including Microsoft Outlook and mobile device applications

Black & McDonald welcomes and encourages applications from persons with disabilities. Accommodations are available upon request for candidates taking part in all aspects of the recruitment and selection process.

#J-18808-Ljbffr

  • Sheet Metal Fabricator

    3 days ago

    Saskatoon, Canada Tex Klassen Wholesale Ltd. Full time

    Tex Klassen Ltd. is a locally owned commercial / residential Metal Fabricating and Glazing shop based in Saskatoon. We are currently looking for a full-time Sheet Metal Fabricator to join our team. Responsibilities: - Read and interpret blueprints, maps, drawings and specifications - Operate metalworking machine to cut, punch, drill, shape or straighten...

  • Sheet Metal Fabricator

    2 weeks ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet Metal Fabricator to build high-quality metal components for our clients. As a Sheet metal fabricator, you will be responsible for reading and interpreting engineering blueprints, fabricating metal components or structures, and performing quality checks on finished...

  • Sheet Metal Worker

    4 weeks ago

    Saskatoon, Canada Ecco Supply Full time

    _Do you have experience in operating fabricating machines to cut and bend sheet metal?_ - Are you skilled in welding to join sheet metal parts?_ - Do you possess a valid driver's license?_ The Sheet Metal Worker will fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes and sheet metal fittings. Work may involve...

  • Sheet Metal Worker

    1 week ago

    Saskatoon, Canada Ecco Supply Full time

    *** ECCO Custom Metal Fabricators is a full service sheet metal and fabrication facility located in Saskatoon. We specialize in custom and specialty metal fabricating. Providing product to various industries including but not limited to the HVAC industry. We use modern computerized equipment, sheet metal forming tools and various welding equipment. Our...

  • HVAC Installer

    6 days ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in Saskatoon,...

  • Apprentice Sheet Metal Worker

    7 days ago

    Saskatoon, Canada Black & McDonald Limited Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in Saskatoon,...

  • Apprentice Sheet Metal Worker

    7 days ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in...

  • Apprentice Sheet Metal Worker

    4 days ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in Saskatoon,...

  • Apprentice Sheet Metal Worker

    4 weeks ago

    Saskatoon, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in...

  • Apprentice Sheet Metal Worker

    3 weeks ago

    Saskatoon, SK, Canada Black & McDonald Limited Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in Saskatoon,...

  • Apprentice Sheet Metal Worker

    7 days ago

    Saskatoon, SK, Canada Black & McDonald Full time

    ABOUT THIS CAREER OPPORTUNITY Black & McDonald is currently seeking an experienced Sheet metal worker who will plan, lay out, repair and install sheet metal products and parts. You will get to put your technical and mathematical skills to use operating tools and machines and taking measurements according to blueprints. The position is located in Saskatoon,...

  • Metal Fabricator

    4 weeks ago

    Saskatoon, Canada Edge Agro Ltd. Full time

    Edge Agro Ltd. is a premium Auger Manufacturer that specializes in truck loading augers. Made entirely in Saskatoon, Saskatchewan Edge Agro Ltd. is proud to enter its next phase of expansion. We at Edge Agro Ltd. are passionate about agricultural machinery and we care about what we do. We proud ourselves in creating the highest quality products that farmers...

  • Labourer - Metal Fabrication

    2 weeks ago

    Saskatoon, Canada Prairie Steel Products Ltd. Full time

    Education: Secondary (high) school graduation certificate - Experience: Experience an asset **Tasks**: - Operate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal products - Immerse metal products in cleaning solutions - Assist structural steel and platework fitters, sheet metal workers, metal machine...

  • Apprentice Sheet Metal Worker

    7 days ago

    Saskatoon, Canada Innovative Heating and Cooling Full time

    Job description We are the innovators and we are looking for the best of the best apprentices to be part of our New Home Construction Crew. We specialize in boiler systems and zero bulkhead designs that are meant to wow the customer. We are a busy shop that has put a huge focus on the customer experience since 2009 and want you to join us in being the best...

  • Sheet Metal Worker

    7 days ago

    Saskatoon, Canada Ace Plumbing & Heating Inc Full time

    Ace Metals is looking to hire a Full-Time sheet metal worker. (Journeyman preferred) Wage: 25.00/hr-35.00/hr with negotiation opportunity with provided experience. Health Benefits offered after 3 months. **Salary**: $25.00-$35.00 per hour **Benefits**: - Extended health care Flexible Language Requirement: - French not required Schedule: - Monday to...

  • Sheet Metal Apprentice and Labourer

    7 days ago

    Saskatoon, Canada K & L Mechanical Ltd. Full time

    Sheet Metal Apprentice; and - Labourer. Wage: Depends on Experience/Education Qualifications are as follows: - Must hold a valid drivers license. - Experience with residential, commercial, and industrial plumbing or sheet metal installation will be considered an asset. - Must have a great work ethic. - Must be reliable and dependable. - Must be able to...

  • Sheet Metal Worker

    4 weeks ago

    Saskatoon, Canada Flowtech Mechanical Ltd. Full time

    Looking for 1st to 4th year apprentice sheet metal worker. **Job Types**: Apprenticeship, Full-time, Permanent **Salary**: $20.00-$36.00 per hour Expected hours: 40 per week **Benefits**: - Dental care - Disability insurance - Extended health care - Life insurance - Vision care - Wellness program Schedule: - 8 hour shift - Monday to Friday - No...

  • apprentice sheet metal worker

    3 weeks ago

    Saskatoon, Canada Revo Plumbing and Heating Incorporated Full time

    Work Term: PermanentWork Language: EnglishHours: 38 to 40 hours per weekEducation: Secondary (high) school graduation certificateExperience: 7 months to less than 1 yearWork site environmentDangerousNoisyDustyAt heightsConfined spacesWork settingInstallationUrban areaShop fabricationVarious locationsOn-site fabricationTasksUtilize hand and power toolsRead...

  • apprentice sheet metal worker

    3 weeks ago

    Saskatoon, Canada Revo Plumbing and Heating Incorporated Full time

    Durée de l'emploi: PermanentLangue de travail: AnglaisHeures de travail: 38 to 40 hours per weekEducation: Expérience: EducationSecondary (high) school graduation certificateWork site environmentDangerousNoisyDustyAt heightsConfined spacesWork settingInstallationUrban areaShop fabricationVarious locationsOn-site fabricationTasksUtilize hand and power...

  • Journeyperson Sheet Metal Worker

    5 days ago

    Saskatoon, Canada Stein Plumbing and Heating Full time

    Come Join the Stein Plumbing & Heating Team! **ALL WORK IS IN SASKATOON, SASKATCHEWAN. NO EVENINGS, NO WEEKENDS.** Since 1980, locally owned, Stein Corp. has been committed to their clients. The company has expanded and diversified, employing over 80 team members. We generate full-time, long-term work in Saskatoon, in the following Red Seal Trades,...