CNC Programmer

2 weeks ago

Vaughan, Canada State Window Corporation Full time

State Window Corporation, Awarded Canada's Best Managed Company of 2021, 2022 , and 2023 is a PROFIT 500 manufacturing and construction company located in Vaughan, ON.Together, we manufacture, design and install window wall, curtain wall, metal panels, glass and railing systems for high rise condominiums. We are looking for individuals who are interested in thriving professionally at a rapidly growing company with an inclusive and engaging culture. A career at State Window Corporation means you can become a part of a clear purpose: one that brings change, innovation, and quality to city skylines, one project at a time.

Our team of talented and determined individuals, are endlessly driven by our core values: Empowered by Innovation, We Make It Happen, Family and Brutally Honest. We take pride in our work, people, and dedication to quality, every step of the way. Apply today if you are qualified applicant looking for a challenging and rewarding career

CNC Programmer
Reports directly to the CNC Programming Supervisor. The CNC Programmer will be responsible for the set-up and programming of computer numerical control (CNC) machines used for manufacturing. Duties and responsibilities include but are not limited to the following:

Education

  • Bachelor's Degree or Diploma in Engineering, Machining, Programming Science, or related area.

Years of Experience

  • Minimum 2 years of programming experience

Working Conditions

  • Office setting;
  • Hours of Work: 8:30 AM - 5:00 PM;
  • Work environment requires wearing PPE in certain locations; and
  • Flexible to work approved overtime as required.

Required Level

  • Experience using Autodesk Inventor (Sheet Metal 3D Modeling);
  • Good knowledge in the following software: AlmaCAM, Dr.ABE, Enroute, CutList Plus and other Nesting/Machining software;
  • Salvagnini S4 + P4 programming is an asset;
  • Strong skills in Mathematics (Geometry) and calculations;
  • Excellent in Microsoft Excel and Outlook;
  • Assist with training any new or junior programmers;
  • Attention to detail and accuracy is required;
  • Ability to problem solve based on Supervisor instructions;
  • Effective written and oral communication skills;
  • Ability to multitask and prioritize daily workload;
  • Discretion, judgement and tact to handle confidential information;
  • File accurately in each job folder; and
  • Demonstrate State's core values and work in a team environment.
Job Specific Duties
  • Receive job folders from Order Processors and review;
  • Separate procedures (Turret, Shear, Router);
  • Ensure requested parts are doable, for example, brake press tooling limitations, sheet sizes for turret and router, etc.;
  • Program MultiCam CNC Router and AMADA Turret;
  • Communication with Breakdown Detailers and Engineering Department for any conflicts regarding drawings and patterns;
  • Effective communication with Supervisors, Order Processors and Machine operators daily in person;
  • Make certain that all required drawings, spreadsheets, bending Instructions and notes are available in job folder;
  • Create label sticker tags for produced parts and check quantities;
  • Responsible for updating designs and programs in case of design change;
  • Quality control of produced parts; and
  • Any other tasks assigned by the CNC Programming Supervisor.
Interested in learning about State’s perks and benefits? State offers the following:

Benefits package including dental, medical, and paramedical benefits, prescription glasses and safety shoes reimbursement, 2 weeks vacation, 6 personal days, Birthday off day, yearly salary review, yearly performance-based bonus, discounted group home/auto insurance, RRSP program, Goodlife Fitness corporate membership, summer hours, Wellness Program, Recognition Program, State Children Education Fund, Training and Development, reoccurring staff social events and more
Providing equal opportunities to all individuals, employment and advancement decisions at State Window Corporation are based on merit, qualifications, and ability. State does not discriminate in employment opportunities or practices because of race, colour, religion, sex, gender identity, gender expression, sexual orientation, place of origin, age, disability, family status or marital status, or any other ground as set out in the Human Rights Code.

State is committed to providing accommodation, accessible formats and communication supports for the interview upon request. In accordance with the Accessibility for Ontarians with Disabilities Act (AODA), we shall ensure that all employees, clients, and visitors receive the same value and quality by identifying, removing, and preventing barriers.

#J-18808-Ljbffr

  • CNC Programmer

    2 months ago

    Vaughan, Canada Next Level Group Full time

    We are seeking an experienced CNC Machinist Programmer who is skilled in programming. The ideal candidate should be able to handle multiple jobs simultaneously while ensuring timelines and quality standards are met. In addition, the role involves providing guidance and training to junior staff members.Responsibilities:Maintain machine runtimes according to...

  • CNC Programmer

    2 weeks ago

    Vaughan, Canada Next Level Group Full time

    We are seeking an experienced CNC Machinist Programmer who is skilled in programming. The ideal candidate should be able to handle multiple jobs simultaneously while ensuring timelines and quality standards are met. In addition, the role involves providing guidance and training to junior staff members.Responsibilities:Maintain machine runtimes according to...

  • CNC - CNC Machine Operator

    6 days ago

    Vaughan, Canada State Window Corporation Full time

    CNC Machine Operator The CNC Machine Operator is responsible for the operation of the CNC machine. He/she will report directly to the supervisor on all matters. Duties and responsibilities include but are not limited to the following: Education - Degree or diploma in Mechanical Engineering or Architectural Technology is preferred. Years of Experience - 1...

  • CNC - CNC Machine Operator

    3 weeks ago

    Vaughan, Canada State Window Corporation Full time

    CNC Machine Operator The CNC Machine Operator is responsible for the operation of the CNC machine. He/she will report directly to the supervisor on all matters. Duties and responsibilities include but are not limited to the following: Education - Degree or diploma in Mechanical Engineering or Architectural Technology is preferred. Years of Experience - 1...

  • CNC Specialist

    2 weeks ago

    Vaughan, Canada Toro Group of Companies Full time

    JOB SUMMARY The CNC Specialist will be responsible for creating, optimizing, and maintaining computer numerical control (CNC) programs used in the manufacturing of precision components. You will play a critical role in translating engineering designs and specifications into machine-readable instructions to produce high-quality parts. This position will...

  • CNC Punch Programmer/Operator

    3 weeks ago

    Vaughan, Canada Mircom Group of Companies Full time

     CNC Punch Programmer/Operator(Afternoon Shift)Founded in 1991, the Mircom Group of Companies is North America’s largest independent designer, manufacturer and distributor of intelligent building and life safety solutions. Reaching customers in over 100 countries worldwide, our portfolio includes: fire detection & alarm, communications & security, mass...

  • CNC Punch Programmer/Operator

    2 weeks ago

    Vaughan, Canada Mircom Group of Companies Full time

     CNC Punch Programmer/Operator(Afternoon Shift)Founded in 1991, the Mircom Group of Companies is North America’s largest independent designer, manufacturer and distributor of intelligent building and life safety solutions. Reaching customers in over 100 countries worldwide, our portfolio includes: fire detection & alarm, communications & security, mass...

  • CNC Punch Programmer/Operator

    3 weeks ago

    Vaughan, Canada Mircom Group of Companies Full time

    CNC Punch Programmer/Operator(Afternoon Shift)Founded in 1991, the Mircom Group of Companies is North America's largest independent designer, manufacturer and distributor of intelligent building and life safety solutions. Reaching customers in over 100 countries worldwide, our portfolio includes: fire detection & alarm, communications & security, mass...

  • Senior CNC Programmer

    2 months ago

    Vaughan, ON, Canada Ben Machine Products Co. Inc. Full time

    Ben Machine Products is a Canadian leader in defence and aerospace manufacturing. Founded in 1973, we have a strong, vibrant workforce of over 200 people across two facilities. Our services include sophisticated 3, 4 and 5-axis CNC milling, CNC turning with live tooling, 6, 8 and 9-axis Swiss turning, precision sheet metal fabrication, mechanical, optical...

  • CNC Punch Programmer/Operator

    3 weeks ago

    Vaughan, Canada Mircom Group Of Companies Full time

    Summary: We are seeking an experienced CNC Punch Programmer/Operator to join our production team. The incumbent should be qualified, dedicated and highly motivated; wanting to work in a team setting with a growing organization. This role is a fulltime afternoon-shift position for our HQ in Vaughan, ON. If you're dedicated and ambitious, Mircom...

  • CNC Punch Programmer/Operator

    2 weeks ago

    Vaughan, Canada Mircom Group Of Companies Full time

    Summary: We are seeking an experienced CNC Punch Programmer/Operator to join our production team. The incumbent should be qualified, dedicated and highly motivated; wanting to work in a team setting with a growing organization. This role is a fulltime afternoon-shift position for our HQ in Vaughan, ON. If you're dedicated and ambitious, Mircom...

  • CNC Machinist

    2 months ago

    Vaughan, Canada People Ops Collective Full time

    **Primary responsibilities**: - Perform own set-ups by positioning and aligning tooling per set-up instructions using CNC Machines. - Maintain tolerances by observing operation and making necessary machine offset adjustments, cutter changes and self-inspection. - Document actions in support of quality logs, communicate all discrepancies in machining to...

  • Computer and data Programmer

    2 months ago

    Vaughan, ON, Canada Boreal Architectural Products Ltd. Full time

    Job Posting for Boreal Architectural Products Ltd. Position: CNC Programmer Boreal Architectural Products Ltd., based in Vaughan, Ontario, is a leading manufacturer specializing in custom millwork and architectural products. We strive for excellence in every project, utilizing advanced technology and materials to meet our clients' needs. Our commitment...

  • CNC Technologist

    2 weeks ago

    Vaughan, Canada Equest Full time

    JOB SUMMARY DIRECT AND INDIRECT REPORTS Product Integration Manager MAJOR RESPONSIBILITIES & ACCOUNTABILITIES Management/Supervision No line management accountabilities Health & Safety: Work in compliance with the Health & Safety Act and regulations including using any equipment, protective devices or clothing required by the employer. Report any...

  • Computer and data Programmer

    4 weeks ago

    Vaughan, ON, Canada Boreal Architectural Products Ltd. Full time

    Job Posting for Boreal Architectural Products Ltd.Position: CNC ProgrammerCompany Overview:Boreal Architectural Products Ltd., based in Vaughan, Ontario, is a leading manufacturer specializing in custom millwork and architectural products. We strive for excellence in every project, utilizing advanced technology and materials to meet our clients' needs. Our...

  • Computer and data Programmer

    4 weeks ago

    Vaughan, ON, Canada Boreal Architectural Products Ltd. Full time

    Job Posting for Boreal Architectural Products Ltd.Position: CNC ProgrammerCompany Overview:Boreal Architectural Products Ltd., based in Vaughan, Ontario, is a leading manufacturer specializing in custom millwork and architectural products. We strive for excellence in every project, utilizing advanced technology and materials to meet our clients' needs. Our...

  • Computer and data Programmer

    2 weeks ago

    Vaughan, ON, Canada Boreal Architectural Products Ltd. Full time

    Job Posting for Boreal Architectural Products Ltd.Position: CNC ProgrammerCompany Overview:Boreal Architectural Products Ltd., based in Vaughan, Ontario, is a leading manufacturer specializing in custom millwork and architectural products. We strive for excellence in every project, utilizing advanced technology and materials to meet our clients' needs. Our...

  • Computer and data Programmer

    2 weeks ago

    Vaughan, ON, Canada Boreal Architectural Products Ltd. Full time

    Job Posting for Boreal Architectural Products Ltd.Position: CNC ProgrammerCompany Overview:Boreal Architectural Products Ltd., based in Vaughan, Ontario, is a leading manufacturer specializing in custom millwork and architectural products. We strive for excellence in every project, utilizing advanced technology and materials to meet our clients' needs. Our...

  • Computer Numerical Control Programmer

    1 month ago

    Vaughan, Canada Boreal Architectural Products Ltd. Full time

    Job Posting for Boreal Architectural Products Ltd. Position: CNC Programmer Company Overview: Boreal Architectural Products Ltd., based in Vaughan, Ontario, is a leading manufacturer specializing in custom millwork and architectural products. We strive for excellence in every project, utilizing a

  • Computer Numerical Control Programmer

    4 weeks ago

    vaughan, Canada Boreal Architectural Products Ltd. Full time

    Job Posting for Boreal Architectural Products Ltd. Position: CNC Programmer Company Overview: Boreal Architectural Products Ltd., based in Vaughan, Ontario, is a leading manufacturer specializing in custom millwork and architectural products. We strive for excellence in every project, utilizing adva