![Meeco Technologies Inc](https://media.trabajo.org/img/noimg.jpg)
Sheet Metal Fabricator
1 week ago
- Review shop drawings and produce field sketches used in fabrication and erection.
- Identify required tools and special equipment.
- Fabrication, assemble, handle, erect, install, dismantle, recondition, adjust, alter, repair and/or service all ferrous and nonferrous sheet metal work of No. 10 U.S. Gauge or of any equivalent or lighter gauge and all other materials used in lieu thereof.
- Locate and mark positions for connections and equipment.
- Install supports and hangers for ducts, accessories, and equipment.
- Fabricates or installs metal cladding over insulation.
- Welding, cutting, rigging, and hoisting.
- Installation of Air Handling Units, Air Conditioning Units, Supply and Exhaust Fans, VAV's, Heat Recovery Units and associated appurtenances.
- Installation of Odor Control Units and associated ducting systems.
- Test and balance air and hydronic systems.
- Working in compliance with Occupational Health & Safety Legislation and Kenaidan's Environmental, Health & Safety Policies and Procedures in daily operations.
- Other tasks as required.
Skill Requirements:
- Sheet Metal Red Seal Trade Certificate
- 510 years industry experience.
- Good communication skills.
- Motivated to learn and contribute positively to the team.
- Able to conduct oneself in public professionally and courteously.
- Punctual, reliable and accountable.
- Opportunity/flexibility to cross between plumbing, pipefitting, and millwrighting work
- Ontario Gas Technician 2 Certification would be an asset.
- Ontario Refrigeration and Air Conditioning Certification would be an asset.
- Current drivers licence.
Working Conditions:
- Ability to work full time and outside of regular hours as required.
- Ability to perform physically demanding tasks outside in all types of weather.
- Sitebased position.
- Use of personal protective equipment (i.e. hard hat, safety boots) required.
Benefits:
Life insurance
On-site parking
Vision care
Dental care
Schedule:
- 8 hour shift
- Monday to Friday
Ability to commute/relocate:
the ongoing needs of the organization.
Salary:
$28.00-$45.00 per hour
Benefits:
- Dental care
- Life insurance
- Paid time off
- Vision care
Schedule:
- Monday to Friday
Ability to commute/relocate:
- Richmond Hill, ON L4B 1B4: reliably commute or plan to relocate before starting work (required)
Experience:
- Welding: 1 year (preferred)
Work Location:
In person
-
Precision Sheet Metal Brake Operator
1 week ago
Richmond Hill, Ontario, Canada GarDel Metal Products Inc. Full timePrecision Sheet Metal Brake Operator familiar with, CNC brake presses and sheet metal layout. Nice clean work environment with newer and well maintained equipment. Benefits and competitive wages.Job Types: Full-time, PermanentSalary: $26.00-$32.00 per hourSchedule: 8 hour shift Day shift Evening shift Monday to FridayWork Location: In person
-
Shop Sheet Metal Worker
1 week ago
Richmond Hill, Ontario, Canada Diako Air Comfort Full timeFabricate metal using the slitter and the break, size and bend metal flashings according to specifications. Organize the metal shop for efficiency. Custom sheet metal jobs as required by customers and as directed by Production supervisor. These tasks require work with the following tools: sawsall, skill saw, chop saw, table saw, radial arm saw, drills and...
-
Labourer - Metal Fabrication
1 week ago
Richmond Hill, Ontario, Canada Beta Calco Inc. Full timeWork Term: Permanent Work Language: English Hours: 40 hours per week Education: Other trades certificate or diploma Experience: 2 years to less than 3 years- or equivalent experienceWork site environment: Dusty NoisyWork setting: Structural steel plant Platework fabrication plant Metal products manufacturing company Heavy machinery manufacturing Industrial...
-
Metal Fabrication Worker
1 week ago
Richmond Hill, Ontario, Canada IV Custom Fabrication Full timeEducation: Expérience:Education: No degree, certificate or diplomaTasks: Operate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal products Assist structural steel and platework fitters, sheet metal workers, metal machine operators or other metal workers Sort metal sheets and parts, scrap metal and other...
-
Metal Polisher Helper
1 week ago
Richmond Hill, Ontario, Canada Vaughan Metal Polishing Limited Full timeEducation: Expérience:Education: Secondary (high) school graduation certificateTasks: Operate metal cleaning equipment to remove excess welds, rust, scale and other materials from surfaces of metal products Transport items throughout plant using powered equipment Transport raw materials, finished products and equipment throughout plant manually Immerse...
-
Machine Operator Sheet Metal
1 week ago
Richmond Hill, Ontario, Canada Viscor Inc. Full timeSet Up and Operate sheet metal forming equipment, such as brake press, shear, punch press, etc. according to instructions provided by lead hand Loading, forming, unloading product ranging from small pieces to larger sheet steel Ensure the accurate measurement of parts using measuring tape or other measuring instruments Check products for correct shapes,...
-
Machine Operator Sheet Metal
1 week ago
Richmond Hill, Ontario, Canada Viscor Inc. Full timeOperate sheet metal forming equipment, such as brake press, shear, punch press, etc. according to instructions provided by lead hand Loading, forming, unloading product ranging from small pieces to larger sheet steel Ensure the accurate measurement of parts using measuring tape or other measuring instruments Check products for correct shapes, dimensions and...
-
Roofer
1 week ago
Richmond Hill, Ontario, Canada TRIUMPH ROOFING & SHEET METAL INC. Full timeEducation: No degree, certificate or diploma Experience: 2 years to less than 3 yearsWork site environment: At heights Noisy Dusty Dangerous OutdoorsTasks: Install or replace asphalt shingles, wood shingles and shakes and masonry or baked clay roofing tiles on sloped roofs of buildings Install and repair metal roofs using hand and power tools Install sheet...
-
Metal Polisher
1 week ago
Richmond Hill, Ontario, Canada Crown Food Service Equipment Full time_Crown Food Service Equipment, Ltd. is a leading design and manufacturer of steam cooking equipment for the commercial foodservice industry._ Crown complements other recent strategic investments in the steam cooking category. With this collection of brands and products, the Middleby steam platform is positioned with industry leading innovations and customer...
-
Drywall Installer
1 week ago
Richmond Hill, Ontario, Canada Drywall Wizards Ontario Inc. Full timeEducation: No degree, certificate or diploma Experience: 2 years to less than 3 yearsWork setting: Various locationsTasks: Apply, level and smooth coats of plaster Clean and prepare surfaces Cure freshly plastered surfaces Cut and install metal corner beads to protect exterior corners Fabricate and install suspended metal ceiling grids and place in panels to...
-
Quality Assurance Inspector
1 week ago
Richmond Hill, Ontario, Canada GARDEL METAL PRODUCTS INC. Full timeAbout usGarDel Metal Products is a build to print Sheet Metal/Machine shop.We are a fast growing company with a variety of customers in the Aerospace, Defense, Medical, and electronics industry.Our 1 stop shop that provides Punch, Laser, Brake Forming, Hardware, Machining, Metal Finishing and a full Powder Coat Paint Line separates us from the...
-
Press Brake Operator
1 week ago
Richmond Hill, Ontario, Canada Contour Machine Ltd. Full timeEducation: Secondary (high) school graduation certificate Experience: 1 year to less than 2 years- or equivalent experienceWork setting: Metal product fabrication industry Sheet metal shopTasks: Cut, bend, roll, ream, punch, drill, weld or otherwise shape and form metal stock into parts or products Read and interpret specifications or follow verbal...
-
Mechanical Fabricator
1 week ago
Richmond Hill, Ontario, Canada Green Infrastructure Partners Inc. Full timeOur purposeAt Green Infrastructure Partners (GIP), our people are second to none. The work we do impacts lives. It impacts our schools and neighbourhoods and shapes our communities and cities.We are one of Canada's largest and fastest growing construction companies. Every day our people are designing, delivering, and maintaining infrastructure for Canada's...
-
Drywall Taper
1 week ago
Richmond Hill, Ontario, Canada Highline Renovations Inc. Full timeWork Term: Permanent Work Language: English Hours: 35 to 44 hours per week Education: Secondary (high) school graduation certificate Experience: 2 years to less than 3 years- or equivalent experienceWork site environment: Dusty NoisyWork setting: Commercial Industrial Residential Various locationsTasks: Apply, level and smooth coats of plaster Clean and...
-
Plasterer
1 week ago
Richmond Hill, Ontario, Canada Rinmore Drywall Services Inc Full timeWork Term: Permanent Work Language: English Hours: 30 to 40 hours per week Education: College, CEGEP or other nonuniversity certificate or diploma from a program of 1 year to 2 years Experience: 1 year to less than 2 yearsWork site environment: At heights Cold/refrigerated Dangerous Dusty Hot Noisy OutdoorsTasks: Apply, level and smooth coats of plaster...
-
drywall finisher
1 week ago
Richmond Hill, Ontario, Canada NGE Solutions Inc Full timeJob Title: PlastererCompany: Dynamic ConstructionWork Term: PermanentWork Language: EnglishHours: 30 to 40 hours per weekEducation: Secondary (high) school graduation certificateExperience: 1 year to less than 2 years or equivalent experienceWork Environment:DustyNoisyWork Setting:CommercialIndustrialRemote locationResidentialVarious locationsTasks:Prepare...
-
manufacturing technologist
1 week ago
Richmond Hill, Ontario, Canada Philcan Group Inc Full timeDurée de l'emploi: PermanentLangue de travail: AnglaisHeures de travail: 40 hours per weekEducation: Expérience: EducationCollege/CEGEPElectrical and electronic engineering technologies/technicians, otherManufacturing engineering technology/technicianMetal fabricatorWork settingSheet metal shopManufactureTasksDevelop and conduct production, inventory and...
-
Drywall Finisher
1 week ago
Richmond Hill, Ontario, Canada NGE Solutions Inc Full timeDurée de l'emploi: Permanent Langue de travail: Anglais Heures de travail: 30 to 40 hours per week Education: Expérience:Education: Secondary (high) school graduation certificate- or equivalent experienceWork site environment: Dusty NoisyWork setting: Commercial Industrial Remote location Residential Various locationsTasks: Prepare tenders and quotations...
-
CNC Brake Press Operator
1 week ago
Richmond Hill, Ontario, Canada Viscor Inc. Full timeCentrally located in the GTA, Viscor is a division of Leviton Manufacturing's Lighting Business Unit operating in Canada for over 70 years. We are growing in many areas and searching for talented individuals to join our team We offer a modern and clean work environment, competitive salary, complete with benefits and opportunities for advancement whenever...
-
CNC Punch Press Operator
1 week ago
Richmond Hill, Ontario, Canada Viscor Full timeCentrally located in the GTA, Viscor is a division of Leviton Manufacturing's Lighting Business Unit operating in Canada for over 70 years. We are growing in many areas and searching for talented individuals to join our team We offer a supportive work environment, competitive salary, complete with benefits and opportunities for advancement whenever...