Distribution Engineer
7 days ago
Role: Distribution Engineer - Projects
Location of Services: Edmonds/Hybrid
INC Rate: $75/
T4: $62/
Work Assignment Overview:
Resource would provide engineering services equivalent to those delivered by BC Hydro Engineers (DE LMS): address daily operational requests and project engineering services for capital work.
Estimated Work Start Date: 24-Jun-2024
Estimated Work End Date: 28-Nov-2025
Experience and Role Accountabilities
•A minimum four (4) years of in a relevant engineering field or equivalent.
•Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.
•Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.
•Participate in BC Hydro's engineering practice by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that BC Hydro's engineering standards are maintained.
•Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.
•Engage with BC Hydro's senior engineering team where engineering problems are difficult, complex, or unusual to support BC Hydro's management of engineering risk.
Important notes:
• Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm's, Permit to Practice with EGBC.
• BC Registrants provided to BC Hydro through this assignment shall work under BC Hydro's Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm's Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.
Education and Skills
•University graduate in applied science or engineering
•Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC
Additional Experience and Role Accountabilities
• All the required Experience and Role Accountabilities shall relate to Overhead - and underground electric utility distribution systems operating at voltages at or below 35kV.
• Support operations, maintenance, repair, replacement and expansion of the BC Hydro Distribution System.
• Investigate, analyze and solve a variety of engineering problems, including the more challenging and unusual, by developing engineering techniques, devising new approaches and/or applying existing criteria in new ways
• Provide technical guidance, instruction, and assistance related to the operation, maintenance, troubleshooting and modifications of equipment Additional
Education and Skills
• Degree in Electrical Engineering recognized by universities in Canada, Power Engineering preferred
• Demonstrated experience and technical knowledge in both Overhead - and underground electric utility distribution systems operating at voltages at or below 35kV including automation
• Broad range of distribution related skills including planning, system engineering, protection engineering, design, and project management
• Demonstrated ability to perform system analysis
• Knowledge of various BC Hydro systems, policies and procedures, preferred
• Willingness to travel
Work Assignment Requirements:
Provide technical expertise to support the capital infrastructure renewal and expansion programs. Act as Owners' Engineer to review and provide feedback on designs created by BCH external consultants for adherence to BCH standards and system impact.
Work with the Planning Engineering, Project Delivery, Design, Standards, Customer Consultants, Field Operations (Operations Centre, District Line Crews, Cable Crews) and other stakeholders to facilitate safe and economical solutions for the Distribution System.
Adhere to EGBC Bylaws, including the requirements for Continuing Education and Quality Management Guidelines. Provide their own EGBC permit to practice. BCH has developed their own Quality Management Practices that comply and sometimes exceed the requirements of EGBC. The successful applicant must follow the BCH Quality Management Practices in addition to those of EGBC.
Use CYME engineering software to analyze existing and future Distribution Circuits. Conduct Load Flow analysis using CYME DIST for circuit capacity, load connection reviews, voltage profile and low voltage mitigation, phase balancing and conductor size upgrades. Conduct fault current analysis and protection coordination studies. Determine fuse sizes for branch lines, determine recloser, switch gear, capacitor bank and voltage regulator settings to ensure a reliable and safe system. Conduct thermal studies of cables in ducts and provide appropriate derating of feeder cables using CYME CAP software.
Use SPIDAcalc non-linear pole line analysis tool to evaluate pole line design and create non-standard OH Line design solutions. Note: experience with PLS-Pole and PLS-CADD non-linear pole line design would be an asset.
Provide technical support to BCH Design Technicians and Technologist in customer connection and system improvement requests. Fulfill POR responsibilities for any non-standard/engineered solutions.
Review Customer Electrical Consulting Engineer submissions to determine if they have met BCH requirements, including protection coordination, switch gear design, single line diagram, grounding, surge arrestors or requests for variance from standards.
Attend Safety, Environmental and Technical Training Sessions unique to BCH through on-line and in class training.
Work space will be provided in the BCH Edmonds office on a hybrid basis. BCH laptop will be provided and access to all required engineering software. Consultant to provide their own cellular telephone. Travel to remote locations for site visits is required, approximately once every second month. The costs will be refunded in accordance with BCH travel expense policy. On-site meetings in the Fraser Valley area up to twice a month.
-
Distribution Engineer
7 days ago
Burnaby, British Columbia, Canada Morson Canada Full timeRole: Distribution Engineer - Projects Location of Services: Edmonds/Hybrid INC Rate: $75/ T4: $62/ Work Assignment Overview: Resource would provide engineering services equivalent to those delivered by BC Hydro Engineers (DE LMS): address daily operational requests and project engineering services for capital work.Estimated Work Start Date:...
-
Distribution Engineer
1 week ago
Burnaby, British Columbia, Canada Primary Engineering and Construction Corporation Full timeWe have an opening for a Distribution Engineer in our Burnaby office.Responsibilities:Technical review of electric utility distribution design packages, including drawings, material take-offs, and calculations.Sealing of electric utility distribution design drawings.Technical mentorship of engineers and technologists.Electrical and civil design of...
-
Distribution Project Engineer
7 days ago
Burnaby, British Columbia, Canada TEEMA Full timeThe Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time. underground electric utility distribution...
-
Distribution Structural Engineer
1 week ago
Burnaby, British Columbia, Canada TEEMA Full timeOverview:The Engineer is a fully qualified and accredited engineering professional who applies theoreticaland practical knowledge to provide engineering design, estimating, planning, and qualitymanagement services for low to medium complexity projects and/or operations safely, withquality, within budget, and on time.Minimum 4 years as a civil-structural...
-
Distribution Structural Engineer
1 week ago
Burnaby, British Columbia, Canada TEEMA Full timeOverview:The Engineer is a fully qualified and accredited engineering professional who applies theoreticaland practical knowledge to provide engineering design, estimating, planning, and qualitymanagement services for low to medium complexity projects and/or operations safely, withquality, within budget, and on time.What you will be doing? Minimum 4 years as...
-
20590 - Distribution engineer - projects
1 week ago
Burnaby, British Columbia, Canada Randstad Canada Full timeAre you an Engineer with extensive knowledge in Asset Management? This 12 months contract role with an opportunity for renewal may be a right fit for you.General DescriptionThe E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and...
-
20590 - Distribution engineer - projects
1 week ago
Burnaby, British Columbia, Canada Randstad Canada Full timeAre you an Engineer with extensive knowledge in Asset Management? This 12 months contract role with an opportunity for renewal may be a right fit for you.General DescriptionThe E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and...
-
15h Left Distribution Engineer
7 days ago
Burnaby, British Columbia, Canada TEEMA Full timeThe Engineer is a fully qualified and accredited engineering professional who applies theoreticaland practical knowledge to provide engineering design, estimating, planning, and qualitymanagement services for low to medium complexity projects and/or operations safely, withquality, within budget, and on time.What you will be doing? All the required Experience...
-
Distribution project/Regional engineer 20613
1 week ago
Burnaby, British Columbia, Canada Morson Canada Full timeRole: Distribution Project/Regional EngineerLocation of Services: Edmonds/Hybrid (2 days a week in office)Estimated Work Start Date: 08-Jul-2024Estimated Work End Date: 30-Nov High chance of extension for the right candidate Max T4 Rate: $63.68/ Max INC Rate: $77/Experience and Role Accountabilities A minimum four (4) years of in a relevant engineering...
-
Manager, Distribution Drafting
3 weeks ago
Burnaby, British Columbia, Canada BC Hydro Full timeWhat you'll do Manage a team of approximately 25 MoveUp employees in a complex, fast-paced environment responsible for drafting and drawing management services for Distribution Design project work throughout the province. Manage the maintenance of Distribution drafting standards and drawing control functions. Work collaboratively with Design managers in...
-
Manager, Distribution Drafting
1 month ago
Burnaby, British Columbia, Canada BC Hydro Full timeWhat you'll do Manage a team of approximately 25 MoveUp employees in a complex, fast-paced environment responsible for drafting and drawing management services for Distribution Design project work throughout the province. Manage the maintenance of Distribution drafting standards and drawing control functions. Work collaboratively with Design managers in...
-
Traffic/distribution Analyst
1 week ago
Burnaby, British Columbia, Canada Hyundai Full timeHyundai Auto Canada Corp. is headquartered in Markham, Ontario and is a subsidiary of Hyundai Motor Company of Korea. Hyundai markets a full line-up of vehicles in this country - from subcompact to premium sedans to sport utility and crossovers - and is committed to providing world-class, well-engineered products paired with a customer shopping and ownership...
-
Senior Structural Engineer
2 months ago
Burnaby, British Columbia, Canada BC Hydro Full timeWhat you'll do* As an experienced professional engineer, investigates, analyzes, and solves challenging or unusual engineering problems by devising new approaches or applying existing criteria in unique ways.* As an experienced professional engineer, perform detailed engineering design and engineering guidance and support during construction, including field...
-
Geological Engineer
1 week ago
Burnaby, British Columbia, Canada MatchBox Consulting Group Full timeMatchbox Consulting Group is looking for a Geotechnical Engineer to join their team for a 5-month project, with potential for extension, at one of BC's top utility and energy companies. As a Distribution Engineer, you will focus on civil-geotechnical design for underground and overhead projects, including handling weather-related issues.Develop innovative...
-
Senior Electrical Engineer
1 week ago
Burnaby, British Columbia, Canada TWD Technologies Ltd Full timeIntermediate/Senior Electrical Engineer (P.Eng. with EGBC) for Building Services Electrical (including HVAC, fire alarms, security, life safety) At GNEC a TWD Technologies Ltd believe that people are our greatest asset. We have an opportunity in our Burnaby, BC office. Electrical Engineer Job Duties Direct and coordinate electrical planning and...
-
electrical engineer
7 days ago
Burnaby, British Columbia, Canada BC Hydro Full timeTitle posted on - Senior Engineer - Distribution Posted onJune 12, 2024 by Employer details BC Hydro Job details Location Burnaby , BC Salary 107,000 annually Terms of employment Permanent employment Full time Important notice: This job posting has been provided by a partner site. Job Bank is not responsible for this content. Sign up for a Plus account...
-
Electrical Engineer
1 week ago
Burnaby, British Columbia, Canada Shermco Full timeElectrical Engineer in Training Since 1974, Shermco has become North America's largest and fastest growing NETA-accredited electrical testing organization. Our focus is to make sure electrical power systems are functioning properly and safely. Add to that our Professional Engineering Group, Rotating Machinery Division, Renewable Energy Services, and Field...
-
Junior Electrical/Design Engineer EIT
7 days ago
Burnaby, British Columbia, Canada Internetwork Expert Full timeLex Engineering Ltd. ("Lex") is a medium-sized consulting engineering firm with offices in Burnaby, Kelowna, and Canmore. Our team of more than 35 full-time employees consists of professional engineers, designers, drafters, and administrators, and takes great pride in our entrepreneurial culture. Since 1979 we have provided a comprehensive range of...
-
water distribution systems technician
1 week ago
Burnaby, British Columbia, Canada Metro Vancouver Full timeTitle posted on - Field Operations Technician Posted on April 29, 2024 by Employer details Metro Vancouver Job details water distribution systems technician Title posted on - Field Operations Technician Posted on April 29, 2024 by Employer details Metro Vancouver Job details Field Operations TechnicianPosition Status: Full-Time...
-
Senior Software Engineer
1 week ago
Burnaby, British Columbia, Canada Electronic Arts Inc Full timeRequisition Number:Position Title: Sr Software Engineer II External Description: We are looking for an experienced Software Architect with an understanding of cloud computing, scalability, security, and distributed computing. You will design an enterprise-scale user-generated content (UG