Maintenance Technician

1 week ago

Sudbury, Ontario, Canada Jennmar Canada Full time

JOB SUMMARY:

This is an mid-level, maintenance position where the employee possesses fundamental mechanical knowledge to perform inside/outside routine maintenance or preventive maintenance for building(s), grounds, machines, and equipment that includes setup and adjustments for production runs and installation/repair of machines and equipment following standard operating and safety procedures.

Employee may interact with vendors to obtain estimates and submits orders for repair parts and supplies as needed.

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

  • High School/GED Required
  • Valid Driver's License Required
  • Demonstrated mechanical experience
  • Electrical and PLC programming experience an asset

JOB QUALIFICATIONS:

  • Possess dependability to be consistently at work and on time with ability to work 40+ flexible schedule as required
  • Possess ability to read and comprehend written instruction; follow verbal directives; follow general and maintenancespecific safety procedures and guidelines
  • Possess functional mathematical ability including knowledge of fractions and decimals to perform basic math calculations and measurement computing using tape measure and/or micrometers
  • Possess functional mechanical knowledge with ability to develop good fabricating and troubleshooting skills including pneumatic and hydraulic systems
  • Possess working knowledge of operational functions for general maintenance equipment including cranes, forklifts, milling machines, lathes, welding and cutting equipment, and hand/power tools
  • Possess basic computer skills
  • Possess a "Team Member" mentality with a QA/safety oriented mindset when performing maintenance duties or operational instruction
  • Possess selfmotivational skills to perform duties without direct supervision with ability to multitask and perform well under pressure
  • Possess functional communication skills to interact with management, coworkers, and outside vendors
  • Possess close visual acuity, near/far vision, and multiple limb coordination
  • Possess manual dexterity and moderate/heavy lbs) lifting capability while performing essential job duties
  • Possess repetitive standing, walking, and/or bending capability during normal phase duties

ESSENTIAL JOB DUTIES:

  • Disassembles and assembles robots or peripheral equipment to make repairs such as replacing circuit boards, sensors, controllers and mechanical components.
  • Performs preventative or corrective maintenance on manufacturing equipment, including pneumatic & hydraulic systems.
  • Maintains, repair and service reports (daily downtime reports and major downtime reports) of presses, robotic equipment and automated production systems.
  • Align, fit or assemble component parts using hands & power tools.
  • Terminates wire harness and other electrical installations
  • Develops, corrects and verifies machinery to ensure safety, quality and equipment efficiency.
  • Maintains and repairs building equipment including air compressor systems, lighting, etc.
  • Maintain inventory of spare parts.
  • Conduct a safety evaluation of work area prior to performing maintenance actions.
  • Perform at a traininglevel capacity inside/outside, routine maintenance or preventive maintenance actions for building(s), grounds, machines, and equipment following standard operating and safety procedures. Maintenance actions include setup actions for product runs; troubleshooting, repairing, and installing machinery/equipment; calibrating and repairing pneumatic systems; inspection of belts, fluid levels, filters, bearings, seals, etc.; providing corrective actions as required.
  • Perform inside/outside, minor/major emergency repairs as required for building(s), grounds, machines, and equipment following standard operating and safety procedures.
  • Perform computerized control and monitoring of mechanical equipment.
  • Perform housekeeping actions adhering to post maintenance/repair procedures.

WORK ENVIRONMENT:

  • Majority of work performance is conducted in a steel manufacturing plant environment using heavy production machinery, material handling and jobspecific equipment and tools. Plant safety and machinespecific safety procedures are strictly enforced and compliant with Federal and/or Provincial regulations.
  • Safety training, written procedures, and continual improvement measures are implemented to eliminate or control any physical/environmental hazards that may be present in the workplace.
  • Employee use of personal protective equipment is enforced for all phases of job performance to prevent bodily injury.

PHYSICAL REQUIREMENTS:

Job Types:
Full-time, Permanent

Benefits:

  • Company pension
  • Dental care
  • Disability insurance
  • Extended health care
  • Life insurance
  • Onsite parking
  • RRSP match
  • Vision care

Flexible Language Requirement:

  • French not required

Schedule:

  • 10 hour shift
  • 8 hour shift
  • Day shift
  • Evening shift
  • Monday to Friday

Work Location:
In person

Applicatio

  • Maintenance Technician

    1 week ago

    Sudbury, Ontario, Canada Panoramic Properties Inc Full time

    As our Maintenance Technician, your main focus is to complete day-to-day maintenance repairs, to a high standard, contributing to the overall customer satisfaction of our residents for our properties located in Sudbury.Responsibilities: Performing repairs as needed, during occupancy and during the transition of residents from units (turnovers); Performing...

  • Experienced Pavement Maintenance Technician

    1 week ago

    Sudbury, Ontario, Canada EverLine Coatings - Sudbury-North Bay Full time

    Benefits/Perks Competitive wages and a flexible working schedule (including opportunities to travel) A challenging, fun atmosphere with a great team Training opportunities and advancement within the company Benefits available after a probationary period Company purpose statement is to provide our employees with a workplace that is considered a vehicle for...

  • Maintenance Technician

    1 week ago

    Sudbury, Ontario, Canada ALS Full time

    Maintenance Technician Greater Sudbury, ON, Canada Req #3393 Tuesday, May 28, 2024 Imagine your future with us At ALS, we encourage you to dream big. When you join ALS, you join a purpose and values-driven team that empowers you to innovate, create, and thrive. Our global team turns up each day with passion and commitment to do amazing things,...

  • Building Maintenance Technician

    1 month ago

    Sudbury, Ontario, Canada Cushman and Wakefield Full time

    Job TitleBuilding Maintenance TechnicianJob Description SummaryThe Maintenance Assistant provides support and is accountable for delivering on our commitments to our residents. This includes quality move-ins, residential satisfaction, expedited service, and personal attention to the resident. The Maintenance Assistant responds to our resident's service needs...

  • Building Maintenance Technician

    4 weeks ago

    Sudbury, Ontario, Canada Cushman and Wakefield Full time

    Job TitleBuilding Maintenance TechnicianJob Description SummaryThe Maintenance Assistant provides support and is accountable for delivering on our commitments to our residents. This includes quality move-ins, residential satisfaction, expedited service, and personal attention to the resident. The Maintenance Assistant responds to our resident's service needs...

  • Maintenance Technician with Electrical and PLC

    1 week ago

    Sudbury, Ontario, Canada Jennmar Canada Full time

    JOB SUMMARY: This is an mid-level, robotics maintenance position where the employee possesses fundamental mechanical knowledge to perform inside/outside routine maintenance or preventive maintenance for building(s), grounds, machines, and equipment that includes setup and adjustments for production runs and installation/repair of machines and equipment...

  • Maintenance Technician with Electrical and PLC

    1 week ago

    Sudbury, Ontario, Canada Jennmar Canada Full time

    JOB SUMMARY: This is an mid-level, robotics maintenance position where the employee possesses fundamental mechanical knowledge to perform inside/outside routine maintenance or preventive maintenance for building(s), grounds, machines, and equipment that includes setup and adjustments for production runs and installation/repair of machines and equipment...

  • Facility Maintenance Lead Technician I

    2 months ago

    Sudbury, Ontario, Canada City of Greater Sudbury Full time

    Section: Facilities ManagementDivision: Asset and Fleet ServicesDepartment: Corporate ServicesInitial Reporting Location: Tom Davies SquareJob Status: Permanent PositionNumber of Vacancies: 1Affiliation: Outside UnitHours of Work: 80 hours bi-weeklyShift Work Required: Yes (on call rotation required)Rate of Pay: $35.93 per hourThe start date will follow the...

  • Facility Maintenance Lead Technician I

    4 weeks ago

    Sudbury, Ontario, Canada City of Greater Sudbury Full time

    Section: Facilities ManagementDivision: Asset and Fleet ServicesDepartment: Corporate ServicesInitial Reporting Location: Tom Davies SquareJob Status: Permanent PositionNumber of Vacancies: 1Affiliation: Outside UnitHours of Work: 80 hours bi-weeklyShift Work Required: Yes (on call rotation required)Rate of Pay: $35.93 per hourThe start date will follow the...

  • Apprentice Technician

    1 week ago

    Sudbury, Ontario, Canada Laking Toyota Full time

    Laking Toyota is looking for an Apprentice Service Technician in SudburyOur Apprentices are responsible for working closely with the rest of the service team to learn and execute on activities as assigned by the Shop Foreman or other Service Technicians. Apprentices should be motivated to learn and be open to feedback.Job Duties: Perform vehicle maintenance...

  • Workshop Technician

    3 days ago

    Sudbury, Ontario, Canada Sandvik Full time

    Sales and product service Workshop Technician Sandvik Mining and Rock Solutions is seeking Licensed Workshop TechnicianLocation: Lively, ONAt Sandvik, we offer you a world of opportunities. Our diverse businesses and global network enable you to explore your potential and thrive. We recognize your performance and offer various ways to fuel your growth...

  • 310T Technician

    1 week ago

    Sudbury, Ontario, Canada Star Employment] Full time

    Job Description:Job Description We are seeking a qualified and experienced Truck and Coach Technician with a 310T certification for our client in Sudbury, ON. The successful candidate will be responsible for diagnosing, repairing, and maintaining heavy-duty trucks and coaches to ensure they operate safely and efficiently.Responsibilities:Perform inspections,...

  • Heavy Duty Equipment Technician

    4 weeks ago

    Sudbury, Ontario, Canada Vale Canada Full time

    Join Vale today. Continuously learn throughout your career. Who We AreWelcome to Vale. Our purpose is to improve life and transform the future. Together. We value our workforce and strive to offer continuous training and career development opportunities for our people. Vale Base Metals is one of the world's largest producers of high-quality nickel and an...

  • Heavy Duty Equipment Technician

    1 month ago

    Sudbury, Ontario, Canada Vale Canada Full time

    Join Vale today. Continuously learn throughout your career. Who We AreWelcome to Vale. Our purpose is to improve life and transform the future. Together. We value our workforce and strive to offer continuous training and career development opportunities for our people. Vale Base Metals is one of the world's largest producers of high-quality nickel and an...

  • Instrumentation & Control Technician

    2 months ago

    Sudbury, Ontario, Canada Vale Canada Full time

    Join Vale today. Continuously learn throughout your career. Who We AreWelcome to Vale. Our purpose is to improve life and transform the future. Together. We value our workforce and strive to offer continuous training and career development opportunities for our people. Vale Base Metals is one of the world's largest producers of high-quality nickel and an...

  • Instrumentation & Control Technician

    4 weeks ago

    Sudbury, Ontario, Canada Vale Canada Full time

    Join Vale today. Continuously learn throughout your career. Who We AreWelcome to Vale. Our purpose is to improve life and transform the future. Together. We value our workforce and strive to offer continuous training and career development opportunities for our people. Vale Base Metals is one of the world's largest producers of high-quality nickel and an...

  • Crane Technician

    1 week ago

    Sudbury, Ontario, Canada Hercules SLR Full time

    We are looking for a full-time Crane Technician to join our team in Sudbury, ON.Reporting to the Branch Manager, the crane technician performs inspections and testing on various hoists and cranes to ensure safety certification is in accordance with provincial and federal regulations. The Crane Technician also assists the sales team with quotes and makes...

  • Maintenance Technician

    1 week ago

    Sudbury, Ontario, Canada ALS Global Full time

    Imagine your future with usAt ALS, we encourage you to dream big.When you join ALS, you join a purpose and values-driven team that empowers you to innovate, create, and thrive.Our global team turns up each day with passion and commitment to do amazing things, always challenging our thinking to find ways to solve some of the world's most complex problems for...

  • Shop Technician

    1 week ago

    Sudbury, Ontario, Canada Lynx Emissions Full time

    At Lynx Emissions, we transcend the ordinary, pioneering, problem-solving, and innovating in the realm of diesel aftertreatment systems.Formerly known as The DPF Company, our journey commenced in 2019 with a singular focus: servicing diesel particulate filters. Over the years, propelled by dedication and a passionate team, we have evolved into the foremost...

  • Maintenance Planner

    1 week ago

    Sudbury, Ontario, Canada DMC Mining Services Full time

    DMC Mining Services is a leading provider of mining services and solutions. As one of North America's premier underground contractors for over 38 years, our comprehensive list of mining services ranges from shaft sinking and raise boring to full mine development and operation.Our core values: Zero Harm, Teamwork, Results Driven, Courage and...