Supervisor, Manufacturing Quality

1 month ago

Fort Erie, Canada Airbus Canada Full time

MAIN RESPONSIBILITIES

Quality Control Responsibilities

  • Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list.

  • Ensure the weekly KPIs are met and take corrective actions to address any anomalies.

  • Managing any backlog with OT as needed.

  • Proactively identifying risks in the department to the attention of the Head of Quality.

  • Creation, approval and revision of Inspection Documents.

  • Ensure all Inspectors are adequately trained on Inspection Documents.

  • Ensure the validations of all First Article Inspections (FAIs) for all new / modified parts / products / kits manufactured by AHCA.

  • Supervise the creation and revision of Quality Assurance documentation (Delivery Documents, PVL, Demande d' Accord).

  • Initiate NCs with Inspectors in a timely manner and manage containment of identified NCs.

  • Lead and support Cost of Non Quality KPIs by proactively engaging in timely Root Cause and Corrective Actions, Implementation of Curative and Corrective Actions and Improvement Workshops.

  • Ensure calibrated equipment assigned to QA are managed and returned for calibration on time.

Quality Assurance Responsibilities

  • Liaise with Manufacturing Engineering and AHCA Engineering for the satisfactory disposition of NCR's.

  • Support role in authoring of Technical Notes and other planned deviations or Standard Repair documentation.

  • Support the review and ensure that processes are compliant to specifications for composite part manufacturing.

  • Support all Manufacturing Technicians in coaching them on the Inspection Acceptance Criteria.

  • Ensure tooling definition delivers expected part quality level, participate in the review of new tooling definition and documentation, conduct tooling conformity inspection and recurrent inspection

  • Participate in the validation and selection of materials, advise on part makeup (lay-up, bonding, surface protection) and cure cycles.

  • Participate as needed for Design Change Requests affecting composite manufacturing.

  • Provide oversight and feedback for AHCA generated manufacturing instructions to ensure compliance to engineering drawings.

  • Participate in the review, bid process of manufacturing work packages and interpretation of drawings, material specifications, manufacturing processes, etc., during the setup for new manufacturing.

  • Support Manufacturing Inspection related Internal and External Audit findings by identifying effective process based root causes and corrective actions.

  • Identifying opportunities to mitigate risks related to Human Factors.

  • Supporting all Objectives pertinent to Aviation Safety, Operational Health & Safety and Environmental Safety.

  • Conduct performance reviews for all inspectors and maintain their time cards including vacation requests and sick day approvals.


Identify and Implement Process Improvements

  • Identify relevant Quality Assurance Manufacturing Inspection training needs/opportunities

  • Proactively identify Manufacturing inspection risks and propose improvements to mitigate them.

  • Advocate and champion decisions based on data and support all Cost of Non Quality KPIs.

  • Advocate decisions based on identification of clear and objective requirements in Quality.

  • Promote and advocate quality achievement and performance improvement across the organization


EDUCATION & JOB REQUIREMENTS

  • College Diploma or equivalent in work experience & technical training

  • 5 years' experience in composite component manufacturing environments, preferably in aerospace.

  • 5 years' experience in the Quality Assurance field

  • 3 years' experience in a supervisory capacity considered an asset

  • Accurate, clear and timely completion of tasks necessary to develop aeronautical products.

  • Strong initiative and motivation necessary to work independently and in a team environment to drive development to achieve the highest standard of quality.

  • Ability to learn, understand and follow departmental and company procedures.

  • Ability to bring the context of long term strategic objectives and goals and apply them to day to day activities and decisions making.

  • Sound understanding of Quality Systems.

  • High level of understanding of the composite manufacturing and repair processes necessary to implement necessary controls and support all associated departments. Also assist in the production and improvements of components, analysis of processes and repairs to work in process.

  • Good understanding of CAD system, (CATIA V5 basics)

  • High level of understanding of AH material and process specifications

  • Ability to prepare and present comprehensive reports on Manufacturing Quality to customers (Airbus Helicopter) and Management

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.

Company:

Airbus Helicopters Canada Ltd

Employment Type:

Permanent

-------

Experience Level:

Professional

Job Family:

Leadership

By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.

Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com.

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

  • Supervisor, Manufacturing Quality

    3 weeks ago

    Fort Erie, Ontario, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESQuality Control Responsibilities Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list. Ensure the weekly KPIs are met and take corrective actions to address any anomalies.Managing any backlog with OT as needed.Proactively identifying risks...

  • Manufacturing Supervisor

    2 days ago

    Fort Erie, Canada Fleet Canada Inc Full time

    Provides production support across all manufacturing units, and production visibility and status to Program Management (and customers), through, Production Control, Finished Part Stores tool stores and expediting functions. The following reflects the principal duties and shall not be construed as a detailed description of all work requirements, nor does it...

  • Production Supervisor

    7 days ago

    Fort Erie, Canada Lancaster Technologies Inc. Full time

    Founded in 2012, Lancaster Technologies is located in the beautiful Niagara Region, our manufacturing facility in Fort Erie, Ontario is just minutes from the Canada-US border. We specialise in the manufacture of solid dose tablets, both in chewable and caplet form. We also provide packaging solutions, including high speed bottling, induction sealing &...

  • Production Supervisor

    6 days ago

    Fort Erie, Canada Sherwin-Williams Full time

    **Job Number**: 230000S3 **Fort Erie, Ontario** *** **|** *** **FORT ERIE, Ontario** *** **|** *** **CAN ON Fort Erie Plant, FORT ERIE** *** **Primary Location**:Fort Erie, Ontario L2A 2J7 **Travel**:Yes, 5 % of the Time **Schedule**:Full-time **Posted**:1/20/2023 **Description**: WELCOME TO SHERWIN-WILLIAMS Here, we believe there’s not one path to...

  • Manufacturing Manager

    4 weeks ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed as...

  • Manufacturing Manager

    3 weeks ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed as...

  • Manufacturing Manager

    3 weeks ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed as...

  • Buyer, Manufacturing

    4 weeks ago

    Fort Erie, Canada Abatement Technologies Full time

    Abatement Technologies, a global company & industry leader in indoor air filtration & restoration equipment, is looking for an energetic and safety minded Buyer for our Fort Erie, ON location.We encourage you to apply if you want to join a growing company that provides innovative and reliable solutions to its customers.Primary Purpose: The Buyer is...

  • Manufacturing Manager

    3 weeks ago

    Fort Erie, ON, Canada The Wohl Group Full time

    Objective : To manage shop floor processes and staff to accomplish business objectives in accordance with the strategic plan. Overseeing the work, people and results in various departments, applying a wide range of skills, knowledge of techniques and procedures. Work to be performed: The following reflects the principal duties and shall not be construed...

  • Chief Quality Inspector

    4 weeks ago

    Fort Erie, Canada Fleet Canada Inc Full time

    Job Summary:A Chief Inspector oversees and coordinates inspection activities, ensuring compliance with regulations and standards. You will be responsible for ensuring that our products meet the highest quality standards through thorough inspections and data analysis. Your expertise in quality control and assurance will play a critical role in maintaining our...

  • Chief Quality Inspector

    4 weeks ago

    Fort Erie, Canada Fleet Canada Inc Full time

    Job Summary:A Chief Inspector oversees and coordinates inspection activities, ensuring compliance with regulations and standards. You will be responsible for ensuring that our products meet the highest quality standards through thorough inspections and data analysis. Your expertise in quality control and assurance will play a critical role in maintaining our...

  • Chief Quality Inspector

    4 weeks ago

    Fort Erie, Canada Fleet Canada Inc Full time

    Job Summary:A Chief Inspector oversees and coordinates inspection activities, ensuring compliance with regulations and standards. You will be responsible for ensuring that our products meet the highest quality standards through thorough inspections and data analysis. Your expertise in quality control and assurance will play a critical role in maintaining our...

  • Quality Assurance Composites Inspector

    6 days ago

    Fort Erie, Canada Airbus Canada Full time

    22 November 2023 Industries Aérospatiale, Aviation Défense Catégories Banque, Assurance, Services financiers, Fort Erie, ON - Temps plein **MAIN RESPONSIBILITIES**: Assembly Inspection/Paint Inspection Visual Inspection Verify potting material shelf life Verify that inserts, components, etc. are installed as per drawing. Visual Inspection for...

  • Quality Assurance Composite Assembly Inspector

    1 week ago

    Fort Erie, Ontario, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESAssembly Inspection/Paint InspectionVisual InspectionVerify potting material shelf lifeVerify that inserts, components, etc. are installed as per drawing.Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.Dust inclusions, orange peel, tears, sagging or blistering.Inspecting parts to planned MIDs and...

  • Chief Quality Inspector

    4 weeks ago

    Fort Erie, ON, Canada Fleet Canada Inc Full time

    Job Summary: A Chief Inspector oversees and coordinates inspection activities, ensuring compliance with regulations and standards. You will be responsible for ensuring that our products meet the highest quality standards through thorough inspections and data analysis. Your expertise in quality control and assurance will play a critical role in maintaining...

  • Quality Assurance Composite Assembly Inspector

    1 week ago

    Fort Erie, Canada airbus Full time

    Job Description: MAIN RESPONSIBILITIESAssembly Inspection/Paint InspectionVisual InspectionVerify potting material shelf lifeVerify that inserts, components, etc. are installed as per drawing.Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.Dust inclusions, orange peel, tears, sagging or blistering.Inspecting parts  to...

  • Quality Assurance Composite Assembly Inspector

    1 week ago

    Fort Erie, Canada Airbus Canada Full time

    MAIN RESPONSIBILITIESAssembly Inspection/Paint InspectionVisual InspectionVerify potting material shelf lifeVerify that inserts, components, etc. are installed as per drawing.Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.Dust inclusions, orange peel, tears, sagging or blistering.Inspecting parts to planned MIDs and...

  • Director of Operations

    3 weeks ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: The Director of Operations will provide strategic leadership and oversight to our manufacturing, warehousing, and maintenance sectors. This role is pivotal for driving excellence through LEAN manufacturing principles, ensuring our team is trained and held accountable, and setting the standard for efficiency and performance within our operations....

  • Director of Operations

    3 weeks ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: The Director of Operations will provide strategic leadership and oversight to our manufacturing, warehousing, and maintenance sectors. This role is pivotal for driving excellence through LEAN manufacturing principles, ensuring our team is trained and held accountable, and setting the standard for efficiency and performance within our operations....

  • Director of Operations

    3 weeks ago

    Fort Erie, Canada The Wohl Group Full time

    Objective: The Director of Operations will provide strategic leadership and oversight to our manufacturing, warehousing, and maintenance sectors. This role is pivotal for driving excellence through LEAN manufacturing principles, ensuring our team is trained and held accountable, and setting the standard for efficiency and performance within our operations....