Battery Electric Vehicle

Found in: Jooble CA O C2 - 3 weeks ago

Windsor ON, Canada V2Soft Full time

Job Description:

The Battery Electric Vehicle Calibration Engineer is responsible for leading calibration development of an assigned function items in the Hybrid Control Processor (HCP) from first dyno, into early mule vehicle to production on the next generation of BEV Propulsion Systems. The scope of responsibility spans the application and optimization of control systems into production for BEV Propulsion Systems. The calibrator will document and justify all HCP calibration changes through rigorous development and test plans. The calibrator will present and justify changes to lead calibrator and Sr. management as appropriate. The calibrator will participate or lead the Center of Excellence team for their functional areas. They will review any new calibrations in their area, work with other calibrators and controls engineers to ensure initial values for new calibrations are correct by reviewing software change requests in the new release (performed at each new SW release). They will coordinate calibration merges with other functional leads. They have production release responsibility for the HCP SW and Calibrations. They will support dyno commissioning and first-run activities. They will work closely with HCP controls team to ensure features are working sufficiently and efficiently. They will provide training to all new calibration engineers and/or anyone else needing training on the operation of ePT vehicles and controls. They will support trips and report activities for Sr. Management. They will work with the CoE teams to ensure best practices are followed. They will be the lead contact point for system issues in their functional area.

This individual will have also demonstrated the ability to work well with others. They must be a team player, supporting and promoting team accomplishments versus personal achievement.

Requirements:
  1. Location: ARDC - Please Note
    We are looking for someone close to ARDC, with minimum days onsite per week. Occasional travel to the US for meetings. Occasional meaning to times per month.
  2. Bachelor of Science in Mechanical, Electrical, Computer Engineering, Computer Science or related degree
  3. Minimum of - Years calibration experience
  4. Basic understanding of Power Electronics, Hybrid Vehicle Architecture, and Power flow
  5. Matlab/Simulink application and development experience
  6. Prior collegiate project work/intern experience in the area of powertrain development, Propulsion system controls, and/or calibration
  7. English: Advanced
  8. Experience with Microsoft Office (Word, Powerpoint, Excel)
  9. Experience with Google Suite (Docs, Slides, Sheets)
  10. Outstanding problem-solving and analytical skills
  11. Good teamwork skills and ability to work independently
  12. Effective communication and interpersonal skills
  13. Good interpersonal relationship
  14. Ability to work as a team
  15. Conflict and crisis management
Preferred Requirements:
  1. Master of Science degree in Mechanical or Electrical Engineering from an accredited university
  2. Knowledge of statistics and statistical methods
  3. Knowledge of software and equipment for engine calibration, MATLAB, measurement and analysis (Inca-Etas / Horiba)
  4. Knowledge of the dyno environment and tools related to it, such as: Puma, Cameo, Indicom, Concerto
  5. Experience with Matlab scripting and other useful data processing languages/tool sets ex: Python, JavaScript/NodeJS, etc…
  6. Experience with Formula SAE
#J-18808-Ljbffr

  • Battery Electric Vehicle

    Found in: Talent CA C2 - 2 weeks ago

    Windsor, Canada V2Soft Full time

    Job Description: The Battery Electric Vehicle Calibration Engineer is responsible for leading calibration development of an assigned function items in the Hybrid Control Processor (HCP) from first dyno, into early mule vehicle to production on the next generation of BEV Propulsion Systems. The scope of responsibility spans the application and optimization...

  • Battery Pack Test Engineer

    Found in: Jooble CA O C2 - 2 weeks ago

    Windsor, ON, Canada V2Soft Full time

    About VSoft VSoft is a global company headquartered in Bloomfield Hills, Michigan, with locations in Mexico, Italy, India, China, and Germany. Our mission is to provide high-performance technology solutions to solve real business problems. We strive to be true partners with our customers, enabling mutual success. We are committed to promoting diversity in...

  • Battery Pack Test Engineer

    2 weeks ago

    Windsor, Canada V2Soft Full time

    About VSoft VSoft is a global company headquartered in Bloomfield Hills, Michigan, with locations in Mexico, Italy, India, China, and Germany. Our mission is to provide high-performance technology solutions to solve real business problems. We strive to be true partners with our customers, enabling mutual success. We are committed to promoting diversity in...

  • Battery Systems Triage Engineer

    Found in: Talent CA C2 - 2 weeks ago

    Windsor, Canada SEGULA Technologies Full time

    Company Description Accelerate your career with a fast-growing global engineering group. At SEGULA Technologies, you'll work on exciting projects and help shape the future in a company where innovation goes hand in hand with engineering. 3D printing, augmented reality, autonomous vehicles, the factory of the future... these are the daily rhythms of...

  • DRE - Battery Pack and Base Engine

    Found in: beBee S CA - 2 weeks ago

    Windsor, Canada Segula Technologies Full time

    Company DescriptionAccelerate your career with a fast-growing global engineering group. At SEGULA Technologies, you'll work on exciting projects and help shape the future in a company where innovation goes hand in hand with engineering.3D printing, augmented reality, autonomous vehicles, the factory of the future... these are the daily rhythms of our 10,000...

  • Mechanical and Electrical Specialist

    Found in: Jooble CA O C2 - 2 days ago

    Brampton, ON, Canada Templatedata.net Full time

    Looking for 12 Volt Electrical installer for Emergency Response Vehicles. Install new 12 Volt electrical assemblies such as Emergency Lighting on emergency response vehicles - (pick-ups, suv and cars, etc.) Connect and disconnect truck batteries and necessary electrical wiring. Troubleshoot electrical system faults Read Electrical schematics ...

  • Thermal Electrical Component Simulation Engineer

    Found in: Talent CA C2 - 2 weeks ago

    Windsor, Canada SEGULA Technologies Full time

    Company Description Accelerate your career with a fast-growing global engineering group. At SEGULA Technologies, you'll work on exciting projects and help shape the future in a company where innovation goes hand in hand with engineering. 3D printing, augmented reality, autonomous vehicles, the factory of the future... these are the daily rhythms of...

  • Electrical Support Technician

    Found in: Jooble CA O C2 - 2 weeks ago

    Greater Sudbury Unitary Authority, ON, Canada Northern Employment Solutions Inc Full time

    We are currently recruiting for the position of Electrical Support Technician to work out of Sudbury, Ontario. The Electrical Support Technician is responsible for performing maintenance, repairs, training and troubleshooting on our client's battery electric vehicles and other equipment in shop and the field. Responsibility & Work Activities: Identify...

  • 12 Volt Electrical Installer

    Found in: Jooble CA O C2 - 2 days ago

    Brampton, ON, Canada Templatedata.net Full time

    Looking for 12 Volt Electrical installer for Emergency Response Vehicles. Responsibilities: Install new 12 Volt electrical assemblies such as Emergency Lighting on emergency response vehicles - (pick-ups, suv and cars, etc.) Pull wires and airlines and harnesses through chassis and body. Connect wires and harnesses to cab Connect and disconnect truck...

  • Electrical Support Technician

    Found in: Adzuna CA C2 - 5 days ago

    Greater Sudbury, ON, P3E 3L9, Greater Sudbury, Canada Northern Employment Solutions Inc Full time

    We are currently recruiting for the position of Electrical Support Technician to work out of Sudbury, Ontario. The Electrical Support Technician is responsible for performing maintenance, repairs, training and troubleshooting on our client's battery electric vehicles and other equipment in shop and the field.Responsibility & Work Activities:Identify the...

  • Electrical Support Technician

    Found in: Jooble CA O C2 - 2 weeks ago

    Greater Sudbury Unitary Authority, ON, Canada Northern Employment Solutions Inc Full time

    We are currently recruiting for the position of Electrical Support Technician to work out of Sudbury, Ontario. The Electrical Support Technician is responsible for performing maintenance, repairs, training and troubleshooting on our client's battery electric vehicles and other equipment in shop and the field. Responsibility & Work Activities: Identify...

  • Vehicle Integration Engineer

    Found in: Talent CA C2 - 2 weeks ago

    Windsor, Canada SEGULA Technologies Full time

    Company Description Accelerate your career with a fast-growing global engineering group. At SEGULA Technologies, you'll work on exciting projects and help shape the future in a company where innovation goes hand in hand with engineering. 3D printing, augmented reality, autonomous vehicles, the factory of the future... these are the daily rhythms of...

  • 12 Volt Electrical Installer/Assembler

    Found in: Jooble CA O C2 - 2 days ago

    Brampton, ON, Canada Templatedata.net Full time

    12V Electrical Installer - Heavy Truck & Tank Electrician Looking for 12 Volt Electrical Installer for Heavy Trucks. Responsibilities: Install new 12 Volt electrical assemblies such as truck mounted lights, switches and actuators. Install and fit air actuated assemblies and airlines. Pull wires and airlines and harnesses through chassis and body. ...

  • Senior Electrical Designer

    Found in: Jooble CA O C2 - 4 days ago

    Waterloo, ON, Canada Nuvation Energy Full time

    Senior Electrical Designer Waterloo, ON, Canada Job Summary Nuvation Energy is seeking a talented and motivated Senior Electrical Designer to join our Battery Energy Storage System (BESS) design team. Candidates must have a strong background in electrical systems design, excellent technical expertise, as well as the ability to work well in a highly...

  • Vehicle Compliance Lead

    Found in: Talent CA C2 - 2 weeks ago

    Windsor, Canada Segula Technologies Full time

    Job DescriptionOur Quality Team is seeking a Vehicle Compliance Lead to join our team within the automotive industry, dedicated to ensuring the achievement of all project quality targets, managing launch timelines and deliverables, and facilitating the seamless transition to high-quality volume production.Specific Responsibilities include, but are not...

  • Vehicle Compliance Lead

    Found in: beBee S CA - 6 days ago

    Windsor, Canada Segula Technologies Full time

    Company DescriptionAccelerate your career with a fast-growing global engineering group. At SEGULA Technologies, you'll work on exciting projects and help shape the future in a company where innovation goes hand in hand with engineering.3D printing, augmented reality, autonomous vehicles, the factory of the future... these are the daily rhythms of our 10,000...

  • TSRC Canada Manager-Vehicle Environmental

    Found in: Jooble CA O C2 - 2 weeks ago

    Windsor, ON, Canada Stellantis Full time

    Job Description: Come join the Stellantis Technical Safety and Regulatory Compliance (TSRC) Team where we are committed to doing what is best for our customers. Be a part of a team filled with bright, resourceful, and determined employees who play a vital role in Stellantis’ regulatory development, certification, and compliance activities. We are looking...

  • Vehicle Analyst

    Found in: Talent CA C2 - 2 weeks ago

    Windsor, Canada SEGULA Technologies Full time

    Company Description Accelerate your career with a fast-growing global engineering group. At SEGULA Technologies, you'll work on exciting projects and help shape the future in a company where innovation goes hand in hand with engineering. 3D printing, augmented reality, autonomous vehicles, the factory of the future... these are the daily rhythms of...

  • Vehicle Compliance Lead

    Found in: Talent CA C2 - 2 weeks ago

    Windsor, Canada SEGULA Technologies Full time

    Company Description Accelerate your career with a fast-growing global engineering group. At SEGULA Technologies, you'll work on exciting projects and help shape the future in a company where innovation goes hand in hand with engineering. 3D printing, augmented reality, autonomous vehicles, the factory of the future... these are the daily rhythms of...

  • Contrôleur de Projets

    Found in: Jooble CA O C2 - 4 days ago

    Toronto, ON, Canada TEEMA Solutions Group Full time

    Reporting to the Head of Project Management & Asset Management, the Project Cost Controller will be part of a team developing energy solutions for large business and institutional customers including electric vehicle charging, battery storage, solar PV and power generation. Your work will help unlock the full potential of electric vehicles and charging...