CNC Machinist

3 days ago


Oakville, Canada BWX Technologies Full time $46,000

Enhance your career at BWXT with in-house opportunities

JOB PURPOSE:

The CNC Machinist reports to the Production Supervisor and is responsible for the operation of one or more CNC machines. The CNC Machinist manufactures large precision-machined components working to tolerances less than 0.0005” using four and five axis mills, lathes, and/or mill-turn equipment. All work must be done purposefully with safety as the first priority.

ACCOUNTABILITIES:

  • Run multiple BWXT machines and demonstrates an ability to work on various BWXT parts of varying degrees of complexity.
  • Design and machine complex tooling / fixture as necessary.
  • Establish with CNC Programmers and Engineers the key dimensions that need to be trended at the machine in the dimension sheets and in the MCS to ensure process capability.
  • Adjust programs/reprogram the part in accordance with the approved PCR.
  • Set up, troubleshoot and/or operate one or more of the following machine(s): CNC lathe, CNC mill, bandsaw, manual mill, manual drill press, and other power tools.
  • Read and interpret technical drawings to set-up parts appropriately to ensure conformity and cycle time requirements.
  • May transfer CNC programs between CNC equipment.
  • Monitor to ensure Tool Life Management is implemented across the cell and in the respective machines which have automated systems.
  • Work with Manufacturing Engineering and Programming to prove out programs and lock them out, standardize and make minor changes to existing programs in accordance with established procedures.
  • Enhance and follow approved work instructions and drawings provided.
  • Strive to hit 100% first time throughput on setup’s and expedited through the QC department.
  • Follow MCS and complete sign-offs as required.
  • Perform basic machine adjustments, if necessary (ex. tool offsets).
  • Set tools per Tooling Set Sheet.
  • Read and interpret technical drawings to verify machined parts.
  • Complete PCR’s to indicate process deficiencies or to make continuous improvement recommendations.
  • Follow tooling life replacement program.
  • Visually or mechanically inspect parts for defects as part of in-process inspection; record results and notify lead/supervisor of deviation as appropriate.
  • Use various types of measuring tools and inspection equipment.
  • Understand and meet or exceed production and quality standards; seek to minimize reject rate.
  • Follow approved work instructions and drawings provided.
  • Perform some simple machine preventative maintenance functions, i.e. checking coolants, checking lubricants, and changing filters.
  • Keep machines and work area clean; notify supervisor or maintenance when machine abnormalities occur.
  • Possess the ability to use the computer system for basic departmental transactions.
  • Safely move components with lifting devices such as cranes and forklifts.

KNOWLEDGE & EXPERIENCE:

  • Able to use a variety of BWXT machines and work on multiple BWXT parts to varying degrees of complexity.
  • Educational background in manufacturing or equivalent experience working on CNC machines.
  • CNC Machinist with a Certificate of Qualification is an asset.
  • 5+ years of experience running 4 and 5 axis CNC mills, multi-axis lathes, long lathes, and/or mill/turn machines.
  • Experience in aerospace, defence or nuclear industry is a definite asset.
  • Able to read and interpret engineering component drawings with an understanding of metrology and GD&T.
  • Demonstrated ability as an adaptable team player with strong communication and problem-solving abilities.
  • Strong ability to work independently to complete assignments promptly while maintaining the high standards required in our industry.
  • Experience using lifting devices (cranes and forklifts).

Please note this job will remain posted until all openings are filled.

The pay range for this position in Ontario is expected to be between $46,000 and $66,000 per year. The total compensation package may also include a full range of medical, retirement, and/or other benefits. Details of participation in these plans will be provided at the time of the selected job candidate's offer of employment.


  • CNC Machinist

    6 months ago


    Oakville, Canada BWX Technologies Full time

    Enhance your career at BWXT with in-house opportunities! Eligible for Employee Referral Bonus: Please note this process follows the BWXT employee guidelines Referral bonus only valid for externally referred applicants **JOB PURPOSE**: The CNC Machinist reports to the Production Supervisor and is responsible for the operation of one or more CNC machines....

  • CNC Machinist

    6 months ago


    Oakville, Canada BWXT Precision Manufacturing Inc. Full time

    BWXT Precision Manufacturing. is a subsidiary of BWXT Canada Ltd. and is a leading supplier of precision-machined components to the international nuclear industry. We specialize in the manufacture of fuel channel and feeder components, tooling and fueling machine spares. As a team member, you create outstanding value for our customers, by producing quality...

  • CNC Lathe Machinist

    6 months ago


    Oakville, Canada Hi-Tech Manufacturing Full time

    **Position Summary**: A CNC Lathe Operator that can set-up and operate a CNC Lathe with mínimal supervision. **NOTE**:Experience with a CNC Mill is an asset. **MUST BE LOCATED IN GTA, ALL OTHER APPLICATIONS WILL BE REJECTED.** **Duties and Responsibilities**: - Read and interpret blueprints and drawings; - Select proper tools and fixtures required as well...

  • Precision Machinist

    2 weeks ago


    Oakville, Ontario, Canada Coordinate Industries Ltd Full time

    Job Title: Precision Machinist - CNC SpecialistCoordinate Industries Ltd is seeking a skilled Precision Machinist - CNC Specialist to join our team. As a key member of our production department, you will be responsible for operating and maintaining complex machine tools, ensuring high-quality precision parts are produced efficiently.About the Role:Operate...

  • CNC 5 Axis Machinist

    3 months ago


    Oakville, Canada Coordinate Industries Ltd. Full time

    The Intermediate **CNC 5 Axis Machinist - Afternoon Shift **operates numerical control machines and machining centers to fabricate parts per engineering specifications without supervision. The Intermediate Machinist receives on-the-job training to set up jobs with supervision. **1- Job Related Duties & Responsibilities** - Follow quality management system...


  • Oakville, Ontario, Canada KPS MACHINE & TOOL LTD Full time

    Job Title: High-Tech CNC MachinistWe are seeking an experienced and skilled CNC machinist to join our team at KPS MACHINE & TOOL LTD.About the Job:This is a permanent position that requires the candidate to work 40 hours per week. The successful candidate will be responsible for setting up and adjusting production machinery, fitting and assembling...


  • Oakville, Canada BWX Technologies, Inc. Full time

    Job Description/Duties: Job Summary: Responsabilities Summary Description of Job: CNC Machinist- Weekend Night Shift Date: Jul 25, 2024 Location: Oakville, ON, CA Company: BWX Technologies BWXT Precision Manufacturing Inc. is a subsidiary of BWXT Canada Ltd. BWXT Precision Manufacturing Inc. is a leading supplier of...

  • CNC Lathe Machinist

    3 months ago


    Oakville, Canada Hi-Tech Manufacturing Full time

    **Position Summary**: A CNC Lathe Operator that can set-up and operate a CNC Lathe with mínimal supervision. **NOTE**:Experience with a CNC Mill is an asset. **Duties and Responsibilities**: - Read and interpret blueprints and drawings; - Select proper tools and fixtures required as well as the ability to perform tool wear offset; - Properly and safely...


  • Oakville, Ontario, Canada KPS MACHINE & TOOL LTD Full time

    Job Description:We are seeking a skilled and experienced Industrial CNC Machinist to join our team at KPS MACHINE & TOOL LTD.About the Role:The successful candidate will be responsible for operating and maintaining complex machine tools, including computer-controlled machines. This is a fast-paced environment with tight deadlines, requiring attention to...


  • Oakville, Canada BWX Technologies Full time

    BWXT Precision Manufacturing Inc. is a subsidiary of BWXT Canada Ltd. BWXT Precision Manufacturing Inc. is a leading supplier of precision-machined components to the international nuclear industry. We specialize in the manufacture of fuel channel and feeder components, tooling and fueling machine spares._ **JOB PURPOSE**: The CNC Machinist reports to the...

  • CNC Milling Machinist

    2 weeks ago


    Oakville, Canada Hi-Tech Manufacturing Full time

    **Position Summary**: A CNC machinist that can set-up and operate a CNC Mill (5-axis) with mínimal supervision. **Duties and Responsibilities**: - Read and interpret blueprints and drawings; - Select proper tools and fixtures required as well as the ability to perform tool wear offset; - Properly and safely load and unload tools and raw materials in CNC...


  • Oakville, Canada VAC Developments Ltd Full time

    **Responsibilities**: - Run machines (Mazak, Vortex) that transform raw materials into finished parts by milling, turning, boring, drilling, tapping, and other processes. - Check machine work for quality and accuracy. - Troubleshoot machines if they break down. - Operate computer-aided design programs to make sure that parts are designed correctly. - Be...


  • Oakville, Ontario, Canada AppleOne Full time

    Are you a skilled machinist with experience working on large CNC Horizontal and Vertical Boring Mills?We are currently seeking a talented Master CNC Machinist to join our team at AppleOne in North York, Ontario.**Job Summary**This is a full-time position that offers competitive pay rates of $45/hr and up. The ideal candidate will have a strong background in...


  • Oakville, Ontario, Canada Coordinate Industries Ltd Full time

    We are seeking a highly skilled CNC Machinist Specialist to join our team at Coordinate Industries Ltd. In this role, you will be responsible for operating and maintaining complex machinery, ensuring high precision and accuracy in your work.About the JobThis is a temporary position with 40 hours of work per week. The successful candidate must have a...


  • Oakville, Canada VAC Developments Ltd Full time

    **VAC Developments** Ltd is a Canadian **Aerospace and Defense Manufacturing **Company. We are looking for experienced **CNC Milling Machinist to join our Milling department.** **We are Hiring for all Shifts**: - **Day Shift**: - **Afternoon Shift** - **Please specify what shift you are looking for.**_ - **Responsibilities**:_ - Studies blueprints, work...

  • CNC Machinist

    4 weeks ago


    Oakville, Ontario, Canada KPS MACHINE & TOOL LTD Full time

    KPS MACHINE & TOOL LTD is seeking a highly skilled CNC Machinist to join our team. As a key member of our manufacturing department, you will be responsible for operating computer-controlled machine tools and producing high-precision parts.About the RoleWe are offering a competitive salary of $60,000 - $80,000 per year, depending on experience. In addition to...


  • Oakville, Canada VAC Developments Ltd Full time

    **VAC Developments** Ltd is a Canadian **Aerospace and Defense Manufacturing **Company. We are looking for experienced **CNC Milling Machinist to join our Milling department.** **We are Hiring for all Shifts**: - **Day Shift**: - **Afternoon Shift** - **Please specify what shift you are looking for.**_ - **Responsibilities**:_ - Studies blueprints, work...


  • Oakville, Canada VAC Developments Ltd Full time

    **VAC Developments** Ltd is a Canadian **Aerospace and Defense Manufacturing **Company. We are looking for experienced **CNC Milling Machinist to join our Milling department.** **We are Hiring for all Shifts**: - **Day Shift**: - **Afternoon Shift** - **Please specify what shift you are looking for.**_ - **Responsibilities**:_ - Studies blueprints, work...


  • Oakville, Ontario, Canada Signs Alive Full time

    About the RoleWe are seeking a highly skilled CNC machinist to join our team at Signs Alive. As a key member of our production team, you will be responsible for operating and maintaining computer numerical control (CNC) machines to produce high-quality products.Key ResponsibilitiesMachine Operation: Set up and operate conventional and computer-controlled...


  • Oakville, Ontario, Canada BWX Technologies, Inc. Full time

    Job SummaryWe are seeking a highly skilled Precision Machinist with CNC Expertise to join our team at BWXT Precision Manufacturing Inc.Company OverviewBWXT Precision Manufacturing Inc. is a leading supplier of precision-machined components to the international nuclear industry. We specialize in the manufacture of fuel channel and feeder components, tooling...