Manufacturing Engineer III
2 days ago
Verathon is seeking a highly skilled Manufacturing Engineer III to join our Operations Team in Burnaby, BC. As a key member of our team, you will be responsible for troubleshooting hardware and system issues, supporting new product introduction, and working cross-functionally to reduce defects, scrap, and cycle time.
Responsibilities:- Manage manufacturing processes and improvements in an Electro-Mechanical factory
- Work effectively with production team, product development engineering team, and quality team to provide support and resolve process and technical issues
- Create and execute verification and validation (IQ, OQ, PQ, FMEA) of product equipment, processes, and designs
- Analyze layout of equipment, workflow, assembly methods, and work force utilization to maximize efficiency
- Develop automated or semi-automated processes to improve efficiency and reliability
- Design, manufacture, and implement production tooling, jigs, dies, and test equipment
- Participate on core team for new product development and hand off from R&D to production
- Review new designs and provide Design for Manufacturing input to Design Engineering
- Review existing product designs and recommend changes to optimize product quality, minimize cost, and ensure designs conform to production capabilities
- Coordinate production of prototypes, engineering builds, and process & product validations
- Track, document, investigate, and analyze rejects and failures in production or customer returns and report design and process issues
- Perform product Failure Investigations and other CAPA related activities
- Perform tolerance analysis on mechanical and electrical assemblies
- Meet annual productivity improvement goals
- Ensure consistent professional communications with all VMCA team members
- Support VMCA's Quality Management System that establishes and maintains effective quality assurance processes and compliance to the International Standards: ISO13485, Canadian Medical Device Regulations (CMDR, SOR, FDA Quality System Regulations (QSR, 21 CFR Part 820), and the Medical Device Directive (MDD93/42/EEC)
- Bachelor's Degree in Mechanical, Electrical, or Manufacturing Engineering
- EIT Required, preferred from EGBC
- 5+ years' experience
- Application of Lean and 6sigma Manufacturing principles
- In-depth knowledge and understanding of manufacturing methods and processes
- Experience with automation, robotics, and PLC programming a benefit
- Understanding of electrical and mechanical design procedures and testing methodologies
- Analytical approach to problem solving
- Experience and aptitude in Design of Experiments, ability to find root cause and correct problems effectively
- Excellent analytical and judgment skills on tolerance issues
- Hands-on laboratory or experimental experience
- The ability to read and interpret procedures and drawings
- Strong technical, analytical, interpersonal, and organizational skills
- Ability to work well in cross-functional teams
- The ability to be dynamic and creative in identifying issues, their resolutions, and in the execution of the resolutions
- The ability to remain open to new ideas and to maintain a positive attitude with a focus on quality
-
Manufacturing Engineer III
4 days ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full time### Job Summary We are seeking a skilled Manufacturing Engineer III to support our IBC Canada business unit. As a proud member of the Rheem Manufacturing Company's family of brands, we are committed to delivering high-efficiency boilers and water heaters for residential and commercial use in North America. ### Key Responsibilities * Collaborate with...
-
Manufacturing Engineer III
4 days ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full time### Job Summary We are seeking a skilled Manufacturing Engineer III to support our IBC Canada business unit. As a proud member of the Rheem Manufacturing Company's family of brands, we are committed to delivering high-efficiency boilers and water heaters for residential and commercial use in North America. ### Key Responsibilities * Collaborate with...
-
Manufacturing Process Engineer
5 days ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full timeJob Title: Manufacturing Engineer IIIThis role will play a pivotal part in our manufacturing operations, focusing on enhancing production processes and managing projects to improve efficiency and productivity.Key Responsibilities:Develop and improve manufacturing processes through detailed planning, thoughtful design, and effective project management.Manage...
-
Manufacturing Process Engineer
5 days ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full timeJob Title: Manufacturing Engineer IIIThis role will play a pivotal part in our manufacturing operations, focusing on enhancing production processes and managing projects to improve efficiency and productivity.Key Responsibilities:Develop and improve manufacturing processes through detailed planning, thoughtful design, and effective project management.Manage...
-
Product Design Engineer III
1 day ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full time $3Product Engineer III, Design Job DescriptionThis role will support the IBC Canada business unit in developing innovative hydronic heating products.As a member of the Rheem Manufacturing Company's family of brands, we are committed to bringing reliable comfort into people's lives while working towards a more sustainable future.Key Responsibilities:Enhance...
-
Product Design Engineer III
1 day ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full time $3Product Engineer III, Design Job DescriptionThis role will support the IBC Canada business unit in developing innovative hydronic heating products.As a member of the Rheem Manufacturing Company's family of brands, we are committed to bringing reliable comfort into people's lives while working towards a more sustainable future.Key Responsibilities:Enhance...
-
Manufacturing Engineer III
1 week ago
Burnaby, British Columbia, Canada Verathon Full timeJob SummaryVerathon is seeking a highly skilled Manufacturing Engineer III to join our Operations Team in Burnaby, BC. As a key member of our team, you will be responsible for troubleshooting hardware and system issues, supporting new product introduction, and working cross-functionally to reduce defects, scrap, and cycle time.Key ResponsibilitiesManage...
-
Manufacturing Engineer III
2 weeks ago
Burnaby, British Columbia, Canada Verathon Full timeJob SummaryVerathon is seeking a highly skilled Manufacturing Engineer III to join our Operations Team in Burnaby, BC. As a key member of our team, you will be responsible for troubleshooting hardware and system issues, supporting new product introduction, and working cross-functionally to reduce defects, scrap, and cycle time.Key ResponsibilitiesManage...
-
Manufacturing Engineer III
2 weeks ago
Burnaby, British Columbia, Canada Verathon Full timeJob SummaryVerathon is seeking a highly skilled Manufacturing Engineer III to join our Operations Team in Burnaby, BC. As a key member of our team, you will be responsible for troubleshooting hardware and system issues, supporting new product introduction, and working cross-functionally to reduce defects, scrap, and cycle time.Key ResponsibilitiesManage...
-
Manufacturing Engineer III
3 weeks ago
Burnaby, British Columbia, Canada Verathon Full timeJob SummaryVerathon is seeking a highly skilled Manufacturing Engineer III to join our Operations Team in Burnaby, BC. As a key member of our team, you will be responsible for troubleshooting hardware and system issues, supporting new product introduction, and working cross-functionally to reduce defects, scrap, and cycle time.Key ResponsibilitiesManage...
-
Product Design Engineer
2 weeks ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full time $3About the RoleThis is a challenging opportunity for a skilled Product Engineer III, Design to join our multi-disciplinary engineering team at Rheem Manufacturing. As a key member of our team, you will play a crucial role in developing our current and next-generation residential and commercial hydronic heating products.Key ResponsibilitiesEnhance existing...
-
Product Design Engineer
2 weeks ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full time $3About the RoleThis is a challenging opportunity for a skilled Product Engineer III, Design to join our multi-disciplinary engineering team at Rheem Manufacturing. As a key member of our team, you will play a crucial role in developing our current and next-generation residential and commercial hydronic heating products.Key ResponsibilitiesEnhance existing...
-
Product Development Engineer III
2 weeks ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full timeAbout the RoleThis position will play a crucial role in supporting the business unit at Rheem Manufacturing.Rheem Manufacturing is a leading manufacturer of high-efficiency boilers and water heaters for residential and commercial use in North America. As a proud member of the Rheem Manufacturing Company's family of brands, we are committed to bringing...
-
Product Development Engineer III
2 weeks ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full timeAbout the RoleThis position will play a crucial role in supporting the business unit at Rheem Manufacturing.Rheem Manufacturing is a leading manufacturer of high-efficiency boilers and water heaters for residential and commercial use in North America. As a proud member of the Rheem Manufacturing Company's family of brands, we are committed to bringing...
-
Manufacturing Process Improvement Specialist
2 weeks ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full timeAbout the RoleThis position will play a crucial role in supporting the business operations of Rheem Manufacturing, a leading manufacturer of high-efficiency boilers and water heaters.The successful candidate will be responsible for enhancing production processes, managing projects to improve efficiency and productivity, and serving as a liaison between the...
-
Manufacturing Process Improvement Specialist
2 weeks ago
Burnaby, British Columbia, Canada Rheem Manufacturing Full timeAbout the RoleThis position will play a crucial role in supporting the business operations of Rheem Manufacturing, a leading manufacturer of high-efficiency boilers and water heaters.The successful candidate will be responsible for enhancing production processes, managing projects to improve efficiency and productivity, and serving as a liaison between the...
-
Program Manager III
7 days ago
Burnaby, British Columbia, Canada Verathon Full timeProgram Manager III Overview Verathon is seeking a seasoned Program Manager III to lead and manage new product development (NPD) programs within our Visualization R&D team in Burnaby, British Columbia. As a key member of our team, you will be responsible for planning and managing program budget and spend, schedule, and requesting resources from...
-
Program Manager III
7 days ago
Burnaby, British Columbia, Canada Verathon Full timeProgram Manager III Overview Verathon is seeking a seasoned Program Manager III to lead and manage new product development (NPD) programs within our Visualization R&D team in Burnaby, British Columbia. As a key member of our team, you will be responsible for planning and managing program budget and spend, schedule, and requesting resources from...
-
Program Manager III
1 day ago
Burnaby, British Columbia, Canada Verathon Full timeJob SummaryVerathon is seeking a seasoned Program Manager III to lead and manage new product development (NPD) programs. As a key member of our Visualization R&D team, you will be responsible for planning and managing program budget and spend, schedule, and requesting resources from cross-functional managers.Key ResponsibilitiesLead and manage program...
-
Program Manager III
7 hours ago
Burnaby, British Columbia, Canada Verathon Full timeJob SummaryVerathon is seeking a seasoned Program Manager III to lead and manage new product development (NPD) programs. As a key member of our Visualization R&D team, you will be responsible for planning and managing program budget and spend, schedule, and requesting resources from cross-functional managers.Key ResponsibilitiesLead and manage program...